河北牛驼镇地热田高温地热水成因分析

牛驼镇地热田以基岩热储层最优,是目前地热田开发利用条件最好的热储层。牛驼镇基岩热储水温60℃~100℃,顶板埋深最浅处小于500m,一般为800~1500m,涌水量50~110 m3/h。基岩地热水水化学类型为Cl—Na型水,偏硅酸浓度46~92mg/L,偏硼酸浓度5.0~33 mg/L,氟浓度5.41~11 mg/L,是优质的理疗矿泉水。本文着重从构造运动的角度分析了牛驼镇高温地热水的形成。阐述了自元古代的吕梁运动开始至二叠纪期间,研究区在经过"三降两升"的五个地史发展期中不仅沉积了良好的基岩热储层,亦储藏了丰富的水源。随着新生代喜山运动的活跃,在牛东等断裂的控制下,牛驼镇凸起发育成熟,在此过程中,牛驼镇凸起暴露地表,沉积了新近系和第四系,构成基岩热储的良好盖层。另外,由于基岩热储岩性的热导率较高及埋藏深度较浅,使得牛驼镇地热田拥有相对较高温度的地热水资源。     

Hydrothermal Dolomite: A Review and PerspectiveEI北大核心CSCD

Hydrothermal dolomite commonly closely associates with oil-gas reservoirs and sediment-hosted Pb-Zn deposits, the Mississippi Valley-type (MVT) Pb-Zn deposits in particular. Host rocks of MVT deposits usually experienced extensive dolomitization, and indeed, hydrothermal dolomite is considered as a useful prospective indicator for MVT mineralization. However, genetic link between the hydrothermal dolomitization and MVT Pb-Zn mineralization is a matter of debate. This paper briefly reviewed the nomenclature and research history of hydrothermal dolomite, introduced the major geological, geochemical characteristics, and distribution of hydrothermal dolomite, spatial and possibly genetic relationship between hdyrothermal dolomite and hdyrothermal ore deposits and oil-gas reservoirs based on case studies including the occurrence of hydrothermal dolomites in MVT deposits in Southwest China. The temporal and genetic relationships between dolomitizaiton and thermal sulfate reduction, sulfide precipitation and thus the location of ore mineralization well worthy more attention, and comprehensive geological and isotope geochemical and state of art in situ techniques will contribute to understanding of the genesis of hydrotherml dolomite and the spatially related ore deposits and oil-gas reservoirs. © 2018, Science Press. All right reserved.     

粗砂砾石地层中高压旋喷桩隔水帷幕施工技术

太原万达广场A2区商住楼基坑工程部分区域为粗砂砾石地层,基坑隔水帷幕中深层搅拌桩无法有效使用。提出了在粗砂砾石地层采用高压旋喷桩隔水帷幕的施工技术方案,采用双套管锚杆钻机引孔、单管高压喷射工艺进行施工,成功实施了这一工程。经检查,喷射注浆体相互咬合良好,有效桩径内水泥含量均匀无夹块现象,隔水帷幕止水效果良好。     

岩溶坝基帷幕灌浆高注浆量控制措施与效果分析

帷幕灌浆是坝基防渗处理的一种常用技术手段,而岩溶地区因其岩溶发育致使岩溶裂隙和通道纵横交错,且难以获取其规律性,灌浆过程中往往会出现注浆量偏高的现象。为了能够既有效控制帷幕灌浆成本,又确保帷幕灌浆施工质量,就需要采用科学、合理、可靠的施工技术措施和手段,对高注浆量的情况进行重点控制和改进。本文结合某水电站岩溶坝基帷幕灌浆中突出的高注浆量现象,通过有针对性地从技术措施和控制手段等方面的综合探索与应用,最终达到了坝基防渗的目的,并最大限度地节约了帷幕灌浆的时间,有效控制了高材料消耗所带来的高成本问题,为类似项目的帷幕灌浆积累了一定的经验。     

复杂地质条件和敏感环境中基坑设计实践及关键技术

上海某国际金融大厦深大基坑项目北侧紧邻运营轨道交通8号线区间隧道,最近处仅7.87 m,南侧与现有世博共同管沟净距2.0~3.0 m,基坑变形控制要求高,周边环境敏感。同时,本项目位于黄浦江畔,场地浅层为典型的淤泥质软土地层,下部为富含承压水粉（砂）土层,且微承压水层与第一、第二承压水层互为连通,止水帷幕无法隔断承压水层,地质条件复杂。设计采用分坑施工、被动区加固、预应力伺服钢支撑系统、抽灌一体化降水方案、超深地下连续墙、跟踪注浆、型钢垫层等技术方案。实测结果表明,区间隧道的最大变形6.52 mm,共同管沟的最大变形15.3 mm,其最大变形均满足变形控制要求,确保了运营区间隧道和共同管沟的安全。     

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.     

基于变分客观分析方法的青藏高原试验区夏季对流降水过程热动力特征分析

本文利用基于变分客观分析方法的物理协调大气分析模型,构建了青藏高原试验区大气热力—动力相互协调的数据集,并通过该数据集对青藏高原试验区夏季深厚及浅薄对流降水过程的热动力特征进行分析,结果表明:变分客观分析后的垂直速度场能更好地与实际观测的对流降水过程相吻合;深厚对流降水期高云含量多,整层大气为较强的上升运动,上升运动可达100 hPa左右,浅薄期高云含量少,上升运动仅能延伸到300 hPa左右;两种对流降水过程中视热源Q₁在低层为冷却作用,高层为加热作用,在深厚期中高层Q₁存在两个加热中心,中层受较强的水汽凝结释放潜热加热所影响,高层主要受过冷云水凝结成冰晶形成高云时释放的热量所影响;在浅薄期中高层Q₁只存在一个加热中心,大气的加热主要来源于水汽的凝结潜热释放;深厚对流降水期视水汽汇Q₂的加热作用可以延伸到200 hPa,而浅薄期仅到340 hPa左右。     

2017年6月一次华南沿海强降水的对流性特征及热动力机制研究

在华南北部或长江流域有锋面雨带活动时,华南沿海常常会出现对流性强降水,突发性很强,给预报造成很大的困惑。文章采用多种观测资料、ERA-Interim 0.125°×0.125°逐6 h再分析资料,对2017年6月15～16日华南北部的锋面雨带及沿海强降雨过程开展分析,对比了二者降水特征与环境条件,重点探讨了该次过程华南沿海强降雨的对流触发与维持,揭示了一种由边界层风切变强迫造成涡度持续发展的动力效应。结果表明:（1）锋面雨带与华南沿海强降雨在降水特征上有显著差异,并各有特点。锋面雨带以大尺度层状云降水和弱对流性降水为主,降水强度东段弱西段强。沿海强降雨以对流性降水为主,局地性强、落区集中、强降雨持续时间长、夜发性明显。（2）水汽方程诊断发现沿海强降雨在边界层水平水汽平流项、垂直水汽输送项比锋面雨带东段具有更大量级,大气层结反映出更深厚的暖层、湿层与对流不稳定,是二者降水强度及性质差异的主要原因。（3）莲花山、峨眉嶂造成气流侧向摩擦与正面阻挡促使漯河河谷内垂直涡度发展,暖湿空气堆积上升并达到自由对流高度,触发了华南沿海最初的降水。夜间建立的西南风急流使边界层垂直风速切变增强,水平涡度倾斜部分转化为垂直涡度发展,与风速水平切变造成的垂直涡度叠加,是强降雨持续时间长的动力机制。海陆边界摩擦差异造成水平、垂直两个方向的风切变增强,共同强迫垂直涡度发展是此次强降雨过程对流维持的动力效应。（4）方程诊断表明华南沿海强降雨由对流潜热释放造成的垂直上升速度占总垂直上升速度的39%～75%,持续、稳定的对流潜热释放是强降雨持续时间长的热力驱动因素。     

基于ENVI-met的福州大学校区冬季热环境模拟与热舒适度变化分析

选取福州大学校园教学区为研究区域,基于典型冬季日背景,运用三维非静力微气候模型ENVI-met,分析模拟校园热环境的差异变化及其热舒适度响应。结合实地勘测,对模型进行校准和验证。结果表明：ENVI-met模型能较好地表征室外热环境,准确预测温度和相对湿度的日变化趋势。混凝土路面、灰色地砖路面行人高度的日平均气温分别比草地高出0.1 ℃和0.3 ℃,逐时最大温差分别为0.68 ℃和0.65 ℃。建筑物阴影和树阴可降低行人高度的气温1.1—1.9 ℃;同一组团在有无遮阴的条件下,平均辐射温度（T_mrt）相差最大可达30 ℃;树木附近和建筑物组团内部生理等效温度（PET）值较小,比硬质路面低2—3个等级。无植被方案下,高温低湿区范围有所扩张,在垂直方向上的增温效应可伸展至10.5 m;风速最大增幅可达1.23 m·s^-1,平均辐射温度较高区域的面积增加了69.25%;热舒适区和热不适区面积分别增加了19.78%和2.03%。     

非均匀介质热蠕变流动的数值求解

针对非均匀介质中热蠕变流动问题,给出了有限单元方法与网格－粒子方法联合求解新技术,即有限单元方法求解欧拉网格节点上的未知量,分布于单元内部作为物质成分标记的粒子反映变形过程.有限元法求解动量方程和连续性方程时引入了速度场和压力场等阶插值的压力场稳定的Petrov Galerkin方法,求解能量方程时采用了流线迎风Petrov Galerkin方法,网格－粒子算法中采用双线性插值与有限单元插值函数对应.有限单元计算与网格－粒子计算相对独立,两种方法计算的数据通过有限单元节点传递.同时,实现了三角形单元的算法和程序,解决了复杂结构条件下不规则网格计算的问题.通过经典方腔热对流问题验证了程序,给出了不规则形态块体沉降算例,并分析了数值解的稳定性.