Determination of vertical displacements over the coastal area of Korea due to the ocean tide loading using GPS observations

This paper describes the GPS applicability for detecting the vertical displacements of ground stations caused by ocean tide loading effects. An experiment was carried out using 12 permanent GPS stations located in the coastal area of Korea using data in the period 1 July until 26 August 2003. The relative height differences were calculated from hourly DGPS data processing based on the carrier-phase observation. The power spectra of the M₂ and N₂ constituents of ocean tide loading were derived using the CLEAN algorithm. The differential vertical displacements generated by the ocean tide loading effect are typically 3–25 mm in coastal area of the Korea. We compared the results from GPS with those of the ocean tide models, NAO.99Jb regional model and GOT00.2, FES99 global models. The M₂ (N₂) amplitude differences of vertical displacements between GPS and GOT00.2 is 1.22 ± 3.61 mm (1.01 ± 1.48 mm), and that of the M₂ (N₂) amplitude difference between GPS and FES99 is 0.04 ± 4.64 mm (0.64 ± 1.75 mm), whereas the M₂ (N₂) amplitude difference between GPS and NAO.99Jb are 0.05 ± 1.03 mm (0.86 ± 1.18 mm). The highest vertical displacements at the PALM station are found for 24.5 ± 0.7 mm from GPS observation, and 22.9 mm from the regional model NAO.99Jb and 13.17 and 10.00 mm from the global models GOT00.2 and FES99, respectively. These values show that the vertical displacements derived from GPS are in good agreement with those of the regional model NAO.99Jb around Korea, more than with the global models. This result indicated that GPS is an effective tool to measure the vertical displacement caused by the ocean tide loading effect in the coastal area, and we need to use the NAO.99Jb ocean tide model rather than the global ocean tide models in and around the Korean peninsula for position determination with permanent GPS installations. This work demonstrates that vertical displacement caused by the M₂ and N₂ constituents of ocean tide loading can be measured by carrier-phase DGPS.     

Cyclic strength and deformation of crushable carbonate sand

Cyclic triaxial tests have been carried out on a skeletal carbonate sand from the west coast of Eire. Results are presented for undrained cyclic shear tests on samples with 80% of relative density consolidated under both isotropic and anisotropic conditions. Failure was defined as a 5% double amplitude cyclic strain and a 5% peak axial strain for stress-reversal and non-reversal stress conditions, respectively. Using this definition the cyclic strength for isotropically consolidated samples was affected by the confining pressure although the angular platey nature of the sand resulted in higher cyclic strengths than for a comparable silica sand. For anisotropically consolidated samples the cyclic strength increased with increasing initial static shear stress while on the other hand the cyclic strength normalised in the usual way with respect to the initial confining pressure decreased as this pressure increased.     

A Study of Seismicity and Earthquake Hazard at the Proposed Kalabsha Dam Site,Aswan, Egypt

High and Aswan Dams Authority (HADA) proposed a plan aiming at constructing a rockfill dam in the Kalabsha area, about 60 km south of Aswan High Dam. The aim of this dam is to restrain the overflow of water to the Kalabsha Valley for keeping one billion cubic meters from being lost due to seepage and evaporation. The safety of dams during earthquakes is extremely important because failure of such a structure may have disastrous consequences on life and property. Therefore, different factors were considered as part of a site assessment. Five seismic source zones, close enough to the site to give rise to potentially damaging earthquake ground motions, were identified. Seven active faults that have the potential for producing significant earthquakes and that pass through or near the dam site were also identified. The earthquake loading represented by ground motions at the site was evaluated. Probabilistic seismic hazard procedures were used for assessing the earthquake loading at six individual sites using Area-and Line-Source Models (ASM & LSM). The ASM is based on current observed seismicity, whereas the LSM is based on geological slip rates. The output represents the expected acceleration amplitude with 90 percent probability of not being exceeded in exposure times of 20, 50, and 100 years. The results from the two models appear to be different, the expected ground motions from ASM were twice as high as expected from LSM. This difference is due to the load of the Aswan reservoir (Nasser Lake) triggering earthquakes on those parts of the faults that lie under the lake at Kalabsha area. The hazard at the selected sites is given by the hazard curve that is represented by the relationship between the peak ground acceleration and its annual exceedance probability. By comparing the curves for the six individual sites for the same source model, it can be concluded that the potential ground acceleration level for all the sites is almost the same. Considering the mean results from the two models, the annual exceedance probability of the expected ground acceleration from ASM is approximately ten times higher than the annual exceedance probability from LSM.Since ASM is based on current seismicity, it is more appropriate forrepresenting the actual hazard for the dam site.     

Biological mechanisms driving the seasonal changes in the internal loading of phosphorus in shallow lakes

Because of the obvious importance of P as a nutrient that often accelerates growth of phytoplankton (including toxic cyanobacteria) and therefore worsens water quality, much interest has been devoted to P exchange across the sediment-water interface. Generally, the release mode of P from the sediment differed greatly between shallow and deep lakes, and much of the effort has been focused on iron and oxygen, and also on the relevant environmental factors, for example, turbulence and decomposition, but a large part of the P variation in shallow lakes remains unexplained. This paper reviews experimental and field studies on the mechanisms of P release from the sediment in the shallow temperate (in Europe) and subtropical (in the middle and lower reaches of the Yangtze River in China) lakes, and it is suggested that pH rather than DO might be more important in driving the seasonal dynamics of internal P loading in these shallow lakes, i.e., intense photosynthesis of phytoplankton increases pH of the lake water and thus may increase pH of the surface sediment, leading to enhanced release of P (especially iron-bound P) from the sediment. Based on the selective pump of P (but not N) from the sediment by algal blooms, it is concluded that photosynthesis which is closely related to eutrophication level is the driving force for the seasonal variation of internal P loading in shallow lakes. This is a new finding. Additionally, the selective pump of P from the sediment by algal blooms not only explains satisfactorily why both TP and PO4-P in the hypereutrophic Lake Donghu declined significantly since the mid-1980s when heavy cyanobacterial blooms were eliminated by the nontraditional biomanipulation (massive stocking of the filter-feeding silver and bighead carps), but also explains why TP in European lakes decreased remarkably in the spring clear-water phase with less phytoplankton during the seasonal succession of aquatic communities or when phytoplankton biomass was decreased by traditional biomanipulation. Compared with deep lakes, wax and wane of phytoplankton due to alternations in the ecosystem structure is also able to exert significant influences on the P exchange at the sediment-water interface in shallow lakes. In other words, biological activities are also able to drive P release from sediments, and such a static P release process is especially more prominent in eutrophic shallow lakes with dense phytoplankton.     

Static and dynamic response of massive caisson foundations with soil and interface nonlinearities—validation and results

The static, cyclic, and dynamic response of a massive caisson foundation embedded in nonlinear layered or inhomogeneous soil and loaded at its top is investigated. The caisson is supported against horizontal displacement and rotation by four types of inelastic springs and dashpots, described with the BWGG model that was developed in the preceding companion paper [Gerolymos N, Gazetas G. Development of winkler model for static and dynamic response of caisson foundations with soil and interface nonlinearities. Soil Dyn Earthq Eng, submitted companion paper]. The prediction of the model is satisfactorily compared with results from 3D-finite element analysis. Some experimental corroboration of the method is provided with the help of a 1/3-scale lateral load test that had been conducted in the field by EPRI. An illustrative example of a caisson embedded in linearly-inhomogeneous clay and subjected to static and dynamic loading is analysed. Characteristic results are presented highlighting the role of soil inelasticity and its interplay with the two dominant interface nonlinearities: separation (gapping) of the caisson shaft from the surrounding soil, and uplifting of the base from the underlying soil.     

碎石土地基湿陷性研究

主要以甘南330 kV变电所碎石土地基的现场浸水载荷试验和室内实验为基础,根据湿陷变形的特征,分析了影响碎石土地基湿陷变形的主要影响因素,探讨了碎石土地基的湿陷机理。认为碎石等大骨架颗粒与细粒胶结物相填充的特殊结构是碎石土地基湿陷最主要的原因。碎石土由于浸水骨架颗粒之间抗剪、抗压强度降低而导致碎石土结构破坏,随之填充在骨架颗粒之间的细颗粒产生二次湿陷,两者引起土体体积减小所导致。     

Vertebrate burrows in late Pleistocene paleosols at Korean Palaeolithic sites and their significance as a stratigraphic marker

A vertebrate burrow-bearing layer of late Pleistocene age is commonly found at many Paleolithic archaeological sites in Korea. The burrows are straight to slightly curved in horizontal (plan) view and gently inclined in lateral (sectional) view. They are interpreted as having been produced by rodent-like mammals based on their size and architecture. The significance of such burrow-bearing layers as a characteristic stratigraphic marker unit is demonstrated by high burrow abundance, consistent stratigraphic position, lack of stratigraphic recurrence at these sites, and widespread geographic extent. Three dating methods, tephrochronology, radiocarbon, and OSL dating, were used to infer the age of these burrow-bearing layers. The dating results indicate that they were formed between ca. 40,000 and 25,000 yr (MIS 3−2), and this suggests that this layer can be used as a stratigraphic time-marker in late Pleistocene paleosol sequences for this region.     

桩端土加固处理设计及检测方法的探讨

介绍了人工挖孔桩桩端土承载力不足进行旋喷桩处理的设计过程以及处理后检测过程中遇到的问题。桩端土处理设计可以遵循一般的地基处理设计方法和原则,并针对复合地基承载力检测和桩端土极限端阻力的检测中存在的差异和共同点,提出组合静载荷试验的思路和方法,并在工程中予以实施,并取得了较好的效果。     

应用深层平板载荷试验选择桩端持力层

深层平板载荷试验是一种新兴的原位测试方法。通过安阳某工程人工挖孔扩底灌注桩深层平板载荷试验的现场实践,确定了不同土层地基土的承载力特征值,为设计单位选择持力层提供数据,并为甲方节省了大量建设资金。     

Luminescence investigation of loess and tephra from Halfway House section, Central Alaska

Infrared stimulated luminescence (IRSL) properties of the Old Crow tephra and bracketing loess from the Halfway House site in Central Alaska are investigated in order to test newly developed techniques, including SAR and recently proposed fading corrections. Loess samples investigated show a standard growth of luminescence with regenerative dose while the tephra sample is less sensitive by an order of magnitude and saturates at lower dose. The growth curves obtained using multiple-aliquots regeneration (MAR) saturate at a higher value than those with the single-aliquot regeneration (SAR) protocol. Fading rate determinations for these samples are shown to be imprecise and no noticeable difference was observed between loess and tephra materials. Anomalous fading corrections using an average g value of 5% are applied to the natural test dose signal intensity using the dose rate correction (DRC) method. IRSL ages obtained for loess are in agreement with the expected age while the tephra age is lower than expected, suggesting the measured fading rate is underestimated for this material.