三维任意形体高密度电阻率法数值模拟方法

为研究高密度电阻率法对各种三维地电体的反映规律，本文介绍了正演程序编制的方法并给出了计算实例。     

跨孔条件下椭球模型的视电阻率异常特征

在跨孔条件下，利用积分方程法计算了孔区内外不同位置、不同产状的三维椭球体模型视电阻率异常。根据所得的典型数值模拟结果，借助视电阻率异常信息剖面图，对异常进行研究，总结了异常特征及其变化规律，并以此为基础分析和认识了其他模型的异常特征。     

高密度电阻率法在地下涵洞勘测中的应用

本文介绍的高密度电阻率法是一种新兴的电阻率方法，与常规电阻率方法相比，高密度电阻率法具有成本低，效率高，测点密集，反映地电信息更丰富，更直观以及资料解释简单方便等特点。本文运用高密度电阻率法勘测地下涵洞，实践证明，高密度电阻率法获得的图形，质量高，解释误差小，是一种方便实用，效果良好，能广泛应用于工程勘测的物探方法。     

吉林省地质灾害类型及防治对策探讨

本文针对吉林省的地质灾害类型及各类地质灾害的成因，分布及其危害进行了论述。对其防治对策进行了探讨，提出了切合本省实际的五项防治措施。     

中强震与江苏新沂地震台地电阻率异常的关系研究

运用速率法、滑动富氏法对江苏省新沂地震台1990年至1999年地电阻率观测资料进行了分析，研究了电阻率异常与江苏省及其邻近地区的中强震的关系。结果表明．从1994年到1997年之间发生的中强震，新沂地震台地电阻率3个测向有不同程度的异常与之对应。研究结果表明．资料异常呈现出的各向异性和其对应性与地球自转加速年份、孕震期的应力状态、震区构造、介质结栖有关。     

地壳介质弹性和电性各向异性研究的新进展

分析了地壳介质各向异性研究的现状，指出了弹性和电性各向异性研究中存在的问题，提出了联合利用弹性和电性各向异性研究地球介质特征及提取物性参数的正反演方法．理论研究和地震过程的实际资料表明，将弹性和电性结合起来研究地壳介质各向异性具有清晰明确的物理意义，是各向异性研究的一个非常有发展前景的新领域。     

AN APPARENT TEMPERATURE MODEL BASED ON THERMAL EQUILIBRIUM

In this paper,a comprehensive analysis and review of the advances in the research of human body comfort degree is made.Based on the studies of human thermal equilibrium theories contributed by previous researchers,different apparent temperature models corresponding to different environments are set up in accordance with the current situation and the characteristics of metabolism in different groups of people in China.After case studies and comparison with present dominant human body comfort degree statistical models,it is proved that the apparent temperature models have high rationality and wide adaptability.Furthermore,the comfort scaling standard according to apparent temperature is suggested,which is suitable for the middle latitude regions in China.     

VICARIOUS RADIOMETRIC CALIBRATION OF SATELLITE FY-ID SENSORS AT VISIBLE AND NEAR INFRARED CHANNELS

For the problem of in-flight test site radiometric calibration for the FY-1D Meteorological Satellite onboard sensor's visible and near infrared channels,this paper described the calibration method,satellite-ground synchronous observation data acquired at China Dunhuang Calibration Test Site,parameter derivation and radiative transfer computation during the calibration,and the calibration result analysis.At FY-1D seven channels (with central wavelength at Channels 1:630 nm,2:865 nm;6:1610 nm;7:455 nm,8:505 nm;9:555 nm;10:932 nm),calibration coefficients obtained during the ground site calibration were compared with that respectively of prelaunch calibration.It is demonstrated that results of FY-1D onboard two sensors' (A and B) at channels 1,2,6 and 10 were close to pre-calibration,and the absolute difference of Gobi desert reflectance computed using test site and pre-launch calibration coefficients was no more than 2%. At other channels,large pre-launch calibration errors resulted in a poor consistency between the test site and pre-launch calibration.The errors can be corrected by the test site calibration results. Based on a rough estimation,the overall error of the calibration was about 6%. The paper also presented the in-flight vicarious calibration at the visible and near infrared channels of FY-1C sensor A which was launched in 1999 and has been put into operational mode since 2002.The results exhibit that FY-1C sensor's response has 23% attenuation at Channels 7 and 8,while only minor degradation at the other channels was found. During the mission,calibrations were also conducted at NOAA-17's Channels 1 and 2 (1:430-830 nm,2:500-1072 nm).A very good consistency has been achieved between the test site and pre-launched calibration results.     

高密度电阻率法在探测煤层露头中的应用

新 疆 含 煤 地 层 具 有 地 层 倾 角 大 、煤 层 厚 度 较 大 、上 覆 第 四 系 厚 度 薄 等 特 点 ,适 宜 用 高 密 度 电 阻 率 法 追 踪 煤层 露 头 。新 疆 煤 田 地 质 局 物 测 队 使 用 复 合 对 称 四 极 剖 面 法 、联 合 剖 面 法 和 中 间 梯 度 法 等 方 法 ,在 拜 城 县 梅 斯 布 拉 克矿 区 探 测 煤 层 露 头 的 隐 伏 位 置 ,收 到 了 很 好 的 效 果 。     

Optimizing a layered and laterally constrained 2D inversion of resistivity data using Broyden's update and 1D derivatives

Dense profile-oriented resistivity data allows for 2D and 3D inversions. However, huge amounts of data make it practically impossible to do full 2D or 3D inversions on a routine basis. Therefore, a number of approximations have been suggested over the years to speed up computations. We suggest using a combination of Broyden's update on the Jacobian matrix with derivatives calculated using a 1D formulation on a parameterized 2D model of locally 1D layered models. The approximations bring down the effective number of 2D forward responses to a minimum, which again gives us the ability to invert very large sections. Broyden's update is not as useful with a parameterized problem as is the case with a smooth minimum structure problem that has been the usual application. 1D derivatives, however, seem to be very effective when initiating a full 2D solution with Broyden's update. We compare the different methods using two different kinds of data on two synthetic models and on two field examples. The most effective and reliable optimization combines 1D derivatives with a full 2D solution and Broyden's update. When using Broyden's update the Jacobian matrix needs to be reset every once in a while. We do this whenever the difference in data residual from the previous iteration is less than 5%. This combined inversion method reduces the computation time approximately a factor of 3 without losing model resolution.