An approach to quantitative analysis of regional economic links

Aimed at promoting regional coalitions and expanding the approach to economic links, this paper puts forward some new concepts such as link intensity and receiving coefficient, expounds the indexes of quantitative analysis of economic links and establishes the quantitative-analysis model of economic links. With help of the model, this paper calculates the values of the link intensities between Su-Xi-Chang (Suzhou-Wuxi-Changzhou) region and Shanghai, and analyzes the regional difference of the economic links.     

A Functional Analysis of the Benthic Macrofauna of the São Sebastião Channel (Southeastern Brazil)

Abstract.  The major problem in coastal areas of developing countries is disturbance caused by anthropogenic influence. This disturbance can be quantified by analysing the distribution and composition of marine communities using uni- and multivariate techniques and the biotic index. A study of benthic macrofauna was carried out along the São Sebastião Channel, northern coast of São Paulo State, Brazil, in an area with a submarine outfall, a petroleum terminal and a commercial harbour. Sampling was undertaken seasonally, by means of a van Veen grab (0.1 m²) at 15 oceanographic stations, from November 1993 to August 1994. A total of 392 species were identified (129 Polychaeta, 127 Mollusca, 98 Crustacea, 28 Echinodermata and 10 other phyla). The sedimentary pattern recorded for the São Sebastião Channel is very heterogeneous, influenced mainly by strong wind-driven currents, and differs from nearby shelf areas. The study area could be divided into three regions based on sediment texture and fauna: one region dominated by medium and coarse sand with low values of organic carbon; a second area where pelitic fractions were dominant with high values of organic carbon and nitrogen; and a third region characterised by fine and very fine sand, presenting intermediate organic carbon values. No temporal significant variation in abundance and species composition was found, except in autumn. The use of the 'marine Biotic Coefficient' showed the same ecological trend as the faunal abundance and demonstrated that the central continental region of the channel is affected by human activities.     

烟台市城市土地可持续利用评价

以烟台市为例,从生态环境协调性、经济可行性、社会可接受性等方面,构建了2004年城市土地可持续利用评价的指标体系,采用特尔斐等方法计算了其可持续利用度。结果表明,烟台城市土地利用目前仍处于可持续利用起步阶段。     

Analysis of a rigid footing lying on three-layered soil using the finite difference method

A numerical procedure is described for the analysis of the vertical deformation and the stress distribution of the strip footings on layered soil media. Three layers of soil with different stiffness are considered with the middle soil layer the thinnest and most stiff layer. The soil media is discretized and using the theory of elasticity, the governing differential equations are obtained in terms of vertical and horizontal displacements. These equations along with appropriate boundary and continuity conditions are solved by using the finite difference method. The vertical and horizontal displacements, strains and stresses are found at various nodes in the soil media. Parametric studies are carried out to study the effect of the placement depth of the middle soil layer, the relative ratios of the moduli of deformation of the soil layers on the vertical displacement of the footing and the vertical stress distribution. These studies reveal that the middle thin but very stiff layer acts like a plate and redistributes the stresses on the lower soft soil layer uniformly. The displacement on the top and bottom of the middle soil layer is almost the same showing that the compression of the middle layer is negligible as it is very stiff.     

基于有限差分法的抗滑桩计算机辅助设计

基于地基系数“m-m”法、“m-k”法、“k-k”法的原理,考虑桩顶和桩底边界条件以及桩在滑动面处位移、转角、弯矩和剪力的连续条件,可解得桩身各节点的位移和内力,提出了进行抗滑桩全桩内力计算的有限差分法。根据差分方程并用VB6.0编制了实用的计算程序,既可避免繁琐的查表计算,提高计算速度,又可提高计算精度,直观生动,真正实现了人机交互,在界面的引导下,设计人员可完成全部计算,并绘出内力图形和抗滑桩截面配筋图,使设计更方便快捷,该软件可以极大地提高生产效率,降低工程造价,从而实现抗滑桩的优化设计。最后采用上述方法对某滑坡的悬臂抗滑桩进行了设计与计算。     

Improved treatments for evaluating horizontal magnetic components through the 3-D FDM in E -polarization induction problems

To improve the accuracy of the numerical evaluation through the 3-D finite difference method, the surface boundary conditions are added to modify the old program. The author has tested the new program by making calculations for the model constructed by Wanamaker, et al (1984). The comparison between the numerical results obtained from this paper and those by Wannamaker, et al (1984) indicates that a pronounced improvement is realized in the evaluation of the horizontal magnetic components. Moreover, better calculations for the vertical magnetic components are also obtainable by using the new program.     

疏勒河流域昌马灌区泉水量预测分析

疏勒河流域农业灌溉主要采用地表水灌溉 ,泉水为该区农业灌溉的主要水源之一 ,该文利用 2 0世纪 90年代的测流资料 ,采用有限差分方法对疏勒河中游泉水量的变化趋势进行预测分析 ,结果显示 ,随着时间的延长 ,泉流量呈逐渐减小的趋势 ,但下降梯度逐渐变小 ,最终趋于稳定     

Reliability based risk index for the design of reinforced earth structures

The design methods currently used for earth reinforcement are mostly based on deterministic properties of both the soil and the construction materials used. Nowadays, however, the general trend is designing at a specific degree of reliability. This is even more true where the raw data such as soil properties exhibit significant variation. Deterministic solutions, in this case, may not suffice. Therefore, this paper will attempt to use probabilistic formulations thereby modifying the existing design procedure of reinforced earth retaining walls to account for uncertainties and variabilities. Through a first order Taylor's series expansion about the mean, the mean and variance of the strip reinforcing components, namely width and length, are derived in terms of the variations in the soil properties. Design charts that enable estimation of both mean and variance are developed to avoid extensive partial differentiation involved in the computations. Using appropriate probability distributions along with the mean and variance, the final design outputs are determined for a selected failure probability by introducing what is refered to as 'risk index'. The results indicate that the risk index increases with an increase in the coefficient of variations and a decrease in failure probability. Furthermore, it is shown that in some cases, depending on the variabilities of the soil properties, the classical design technique produced a relatively high failure probability. This revised version was published online in July 2006 with corrections to the Cover Date.     

强震前大气层中温压相关特征的异常显示

对中国大陆已发生的多次7级以上强震震中区气温、气压资料进行了研究，结果表明：在大震前（30天之内），气温－气压函数的平衡状态被破坏，其相关系数（代数值）不断增大，“正弓”形可作为短临异常的标志，同时对其成因也进行了初步探讨。     

Seismic Ground Motion Expected for the Eastern District of Naples

The seismic ground motion of a test area in the eastern district of Naples is computed with a hybrid technique based on the mode summation and the finite difference methods. This technique allows us the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, we consider the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, which is located about 90 km from the epicenter.The detailed geological setting is reconstructed from a large number of drillings. The sub-soil is mainly formed by alluvial (ash, stratified sand and peat) and pyroclastic materials overlying a pyroclastic rock (yellow neapolitan tuff), representing the neapolitan bedrock. The detailed information available on mechanical properties of the sub-soil and its geometry warrants the application of the sophisticated hybrid technique.As expected, the sedimentary cover causes an increase of the signal's amplitudes and duration. If thin peat layers are present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such layers, that tend to seismically decouple the upper from the lower part of the structure.For SH-waves, the influence of the variations of the S-wave velocities on the spectral amplification is studied, by considering locally measured velocities and values determined from near-by down-hole measurements. The comparison between the computed spectral amplifications confirms the key role of an accurate determination of the seismic velocities of the different layers.The comparison performed between a realistic 2-D seismic response and a standard 1-D response, based on the vertical propagation of waves in a plane layered structure, shows considerable difference, from which it is evident that serious caution must be taken in the modelling of expected ground motion at a specific site.