The tectonic regime in Italy inferred from borehole breakout data

In Italy, the horizontal stress directions are well constrained in many regions, but the tectonic regime is not well known because the stress magnitudes are unknown. Our intention is to improve the knowledge of crustal stress in Italy, both at shallow depth and in low seismicity areas. Therefore, we inferred the tectonic regime from the comparison between the depth of breakout occurrence and the physical properties of the rocks in 20 boreholes. The critical value of the maximum horizontal stress, for which the effective tangential stress at the borehole wall overcomes the rock strength to form breakouts, could be computed from rock strength and density. Comparing the theoretical stress distributions for different tectonic regimes with the depth distribution of breakout occurrence, it is possible to infer the tectonic regime that fits best to the breakout depth distribution. We investigated boreholes up to 6 km deep located in different tectonic environments over the Italian peninsula: the Po Plain, the Apenninic chain, the Adriatic foredeep and the Tyrrhenian Quaternary volcanic region. These wells are characterised by breakout data of good quality (A, B and C, according to World Stress Map quality ranking system). The results are in general agreement with the style of faulting derived from earthquake focal mechanisms and other stress indicators. Our results show a predominance of a normal faulting (NF) regime in the inner Apennines and both normal faulting and strike–slip faulting (SS) style in the surrounding regions, possibly also associated with changes in the tectonic regime with depth.     

Numerical models of tectonic deformation at the Baltica–Avalonia transition zone during the Paleocene phase of inversion

Predictions from dynamic modelling of the lithospheric deformation are presented for Northern Europe, where several basins underwent inversion during the Late Cretaceous and Early Cenozoic and contemporary uplift and erosion of sediments occurred. In order to analyse the evolution of the continental lithosphere, the equations for the deformation of a continuum are solved numerically under thin sheet assumption for the lithosphere. The most important stress sources are assumed to be the Late Cretaceous Alpine tectonics; localized rheological heterogeneities can also affect local deformation and stress patterns. Present-day observations available in the studied region and coming from seismic structural interpretations and stress measurements have been used to constrain the model. Our modelling results show that lateral variation in lithospheric strength below the basin systems in Central Europe strongly controls the regional deformation and the stress regime. Furthermore, we have demonstrated that the geometry of the boundary between Baltica and Avalonia, together with different rheological characteristics of the two plates, had a crucial role on local crustal deformation and faulting regime resulting in the Baltica–Avalonia transition zone from the S–N Alpine convergence.     

锤击沉管碎石桩处理液化地基的工程实践

结合实际工程,对锤击沉管碎石桩加固处理液化地基的设计、施工控制及处理效果进行了系统论述,对碎石桩设计、施工中遇到的若干问题提出了建议。     

承台外区土阻力群桩效应及效应系数的有限元分析

利用三维弹塑性有限元方法,对复合桩基承台外区土阻力群桩效应及其效应系数进行了研究,讨论了土类、桩长、桩距、桩数等对承台外区土阻力群桩效应及其群桩效应系数的影响,结果表明(1)承台外区土阻力随承台宽与桩长之比 (B/L)的增大而增大,但增幅不大;随桩距S增大而增大;受桩数n的影响不大。(2)承台外区群桩效应系数随B/L增大几乎无变化;随S增大而增大;不随n变化而变化。(3)承台外区群桩效应系数与土类有关。     

深基坑复合喷锚支护技术探讨

工程实践表明,复合喷锚支护是一种有效的深基坑支护型式,它可用于土层条件差、安全性要求高、变形控制严格的基坑工程中。复合支护中锚杆为主要受力构件,竖向花管为辅助受力构件,可起到限制、减小土体变形的作用。由于竖向注浆花管的加入,花管及注浆体抗剪作用加强,使基坑的整体稳定性得以大幅度提高。探讨了复合喷锚支护整体稳定性分析方法,建议将滑动区域分为加固土和原土两部分,将锚管注浆形成的注浆体等效为一层加固土,按喷锚支护模型计算复合喷锚支护整体稳定性。     

抚顺城区段浑河断裂现今活动性研究的述评

对以往关于抚顺城区段浑河断裂现今构造活动性的主要文献所采用的地壳形变测量资料及其结论的科学性作了述评，认为得出的抚顺城区段浑河断裂现今构造活动明显或不明显的结论尚缺乏充分的依据，提出了进一步研究该断裂现今构造活动性的建议与方法。     

新疆南天山环境应力场特征

基于新疆强震固定台和流动观测记录的主要和余震加速度资料，选用了三个分向记录都完整的３７次地震。震级范围为１．８－６．８级，震中距为几至几十公里。根据用位错理论二维断裂力学模式推导的震源峰值、加速度与环境剪应力场关系式计算了新疆南天山环境剪应力值。计算结果表明，新疆南天山环境应力平均值偏高，这与新疆处于特殊构造环境条件有关。     

华北北部场源前兆观测资料分析(一)──场源前兆特征与机制

1976年唐山地震前，在距震源很远的地区内都观测到一些前兆趋势变化，如重力、重力位二次徽商W△、水氧、地电阻率、水位和油井出油量等变化。作者认为这些变化不是由震源体直接引起的，而是在区域应力场的作用下，在某些活动断层附近，浅层岩，尤其是含水砂岩层和含油层受挤压出现的一些与地震有关的异常现象。其特征是：（1）异常范围大，可能在距震源很远的地方发生，但就同一种方法的多个观测点来说却又是局部的，即只有其中部分测点才能观测到异常，不少测点观测不到异常。（2）异常发生的时间大致相同。有些异常有同步变化的特征，如同时上升或同时下降。（3）临震前多数异常有恢复的趋势。这些特征与引起异常的机理有关。作者还从理论上计算了这种趋势异常量级，重力变化100×10-6cm／s2左右，重力位二次微商变化（1～2）×10－9／s2，地电阻率变化2％～3％，Rn变化7．4～11．1Bq／L，这样的变化量在活动断层附近的一些台站可能观测到。作者还研究了干旱降雨对某些前兆的影响，其影响量级可以被一些方法观测到，因此在确定是否是地震异常时，必须注意利用综合分析的方法排除干旱降雨的影响，减少异常的多解性。     

新疆阿拉尔花岗岩MFC过程的微量元素综合效应

新疆阿拉尔花岗岩的微量元素比相关图显示了线性样点列与幂函数曲线形式的样点列相 复杂图型。该图型用简单混合或者单一结果分异模型都不能解释。本文建立了混合－结晶分异复合过程的微量元素综合效应模型。模型１：从初始混合线引起害虫函数曲线束形式的结晶分异线。特殊情况有结晶分异线简化为通过原点的直线束形式或者与初始混合线重合。     

华北地台中寒武世米级旋四层序与复合海平面变化

笔者在对华北地区中寒武统颐滩碳酸盐建造露头层序地层学研究工作中首次识别出层序中最基本的地层单元──米级旋回层序，它是露头层序分析最基本的工作单元。本文总结概括出不同体系域内米级旋回层序类型和特征。这些米级旋四层序在塞向上叠加构成高级（五级、四级、三级）旋回层序时表现出周期性和规律性。这种不同级次的旋回层序的形成受不同动力成因引起的具不同周期和频率复合海平面变化的控制。米级旋回层序的识别与复合海平面变化的研究得出中寒武世鲕滩层序的形成经历了若干次周期性的淹没－间断－均衡堆积－加积进积事件，这为盆地充填史的恢复提供了新途径。