福建省上杭-大田地区中生代成岩成矿作用与构造环境演化

本文所研究的四个中生代花岗岩体具不同的同位素年代:汤泉岩体为183～158Ma,紫金山岩体为157-145Ma。才溪岩体为133Ma,四方岩体为108～105Ma,汤泉和紫金山岩体分别属于早中生代中、晚侏罗世,才溪和四方岩体时代为晚中生代早白垩世。汤泉和四方岩体为A/CNK<1.0的准铝质花岗岩类,因富Ba、Sr,贫HREE、Y、Yb而具埃达克岩地球化学特征,是最具铜矿成矿潜力的含矿母岩;紫金山花岗岩体为A/CNK>1.1的强过铝花岗岩,并富K、Rb、Th、Y、HREE,贫Sr、Ba、Ti,具地壳泥质岩石熔融的特征。才溪岩体为A/CNK1.0～1.1的弱过铝花岗岩,其元素地球化学特征介于四方岩体和紫金山岩体之间。富Na2O的汤泉岩体是地幔起源的基性岩浆底侵作用,促使加厚的元古代下地壳基性岩石部分熔融所形成,是铜、铁多金属矿床成矿系列的主要含矿母岩;富K2O的四方岩体是地幔起源的富钾基性岩浆与中下地壳物质部分熔融形成的花岗质混合岩浆,使岩浆中的K2O含量增高,并从地幔中获取大量铜及其它金属和硫,而成为斑岩型铜金多金属矿床成矿系列的主要含矿母岩。研究区自早-中侏罗世(180Ma)以来已有岩石圈伸展的岩石学记录。紫金山强过铝花岗岩是这种伸展机制延续的结果。随时间推移,岩石圈伸展减薄作用和底侵作用增强,地幔组分在花岗质岩浆的形成过程中贡献     

湘中龙山穹窿的构造演化

湘中龙山穹隆是一个复合成因的穹窿。加里东期表现为共轴而非等势挤压造山,印支期经历了非共轴而等势的挤压造山。早期的构造样式为北东向的紧密线性倒转褶皱,晚期的构造样式为北东向的短轴背斜。     

从地震信息看红河—金沙江断裂带构造特征

红河—金沙江断裂带,根据地质结构的差异可分为北段羌塘向北叠瓦逆冲断裂带,中段三江—哀牢山向东叠瓦逆冲断裂带,南段河内—中建正反转走滑断裂带。北段和中段均由三组基本平行的叠瓦逆冲断层构成,显示以强烈挤压为特征,但后者相对较弱;南段则经历了古近纪由挤压反转为拉张,形成一些断陷构造,新近纪又反转为挤压,断陷转变为坳陷,形成河内、莺歌海及中建等坳陷。该南段的主断层为正反转构造逆冲带的前锋太平断裂带,与原先人们所认为的不相同。红河—金沙江断裂带的挤压特征总体上由北往南逐渐减弱,其演化受特提斯构造活动所控制。断裂带的油气勘探成果表明,在喜马拉雅期形成的断坳结构盆地中油气显示较好。     

1605年琼山大地震深部构造和应力状态研究

利用1605年琼山地震区已有的浅部地质、物探和钻井等资料,采用空间域三维重力正反演计算,消除了地壳浅部影响,依次得到由浅到深的各剩余深部重力异常值。然后由基底剩余重力异常值反演得到莫霍界面深度及起伏形态。分析上述结果可知:1605年的琼山大地震是一个以垂直向差异运动为主的地震,位于琼北莫霍面隆起区东北部、隆起向外凸出部位的陡坡上;北东东向的马袅-铺前断裂(中东段)呈反扭(左旋)状态,而北西向的铺前-清澜断裂(北段)呈顺扭(右旋)状态;云龙地区地下地幔物质上涌,造成云龙地块的上隆;如果1605年地震区出现NE30°左右的主压应力场作用和云龙地块异常上隆时,应考虑地震的复发问题。另外,分析各剩余深部重力异常等值线分布,还可以判定地质学给出的各断裂构造展布和延伸情况。     

晚喜山期以来四川盆地构造-热演化模拟

四川盆地位于扬子板块西缘,是我国重要的含油气盆地之一.25 Ma以来的晚喜山期是四川盆地构造-热演化的重要时期,此时,盆地大部分区域受到挤压处于隆升剥蚀的构造动力学环境.本文采用有限元数值模拟方法,基于二维瞬态热传导(含平流项)的基本方程,并引入修正的Airy均衡理论模型,通过覆盖全盆地的八条剖面模拟研究了晚喜山期以来四川盆地的构造-热演化特征,且利用现今大地热流对模拟结果进行了有效约束.模拟结果显示在晚喜山期(~25 Ma)川中地区地表热流较高,为60~64 mW/m²;川西南地区次之,为60~62 mW/m²;川东北地区最低,为50~54 mW/m².该期基底热流,也是川中隆起区热流高,川东北强烈剥蚀区热流低.热流的空间分布特征揭示了四川盆地深部动力学机制.四川盆地晚喜山期以来,抬升剥蚀作用降低了其地表热流和基底热流,其降低幅度与对应的剥蚀速率相关,即剥蚀速率越大,这种降低作用越明显.     

2000年1月15日姚安6.5级地震的震源断层与震源应力场

用姚安地震序列前震、主震和余震的 78个震源机制解 ,分析了序列震源断层和震源应力场特征。结果表明 ,姚安地震序列的主破裂面是走向N5 0°W、倾角陡立的构造断裂 ,主震、前震和绝大多数余震都发生在主破裂面上。此外 ,NNE NE向构造断裂在序列发展过程中也参与了活动。序列震源应力场以SSE方位、接近水平的主压应力为主 ,与区域构造应力场一致。在序列发展中 ,震源区应力场出现多方位和多作用方式共存的复杂状态 ,震源破裂出现多方向和多表现形式的复杂性特征     

Pb and Nd isotopic composition of the Jigongshan granite: constraints on crustal structure of Tongbaishan in the middle part of the Qinling–Tongbai–Dabie orogenic belt, Central China

The Qinling–Dabie–Sulu belt is the world's largest ultrahigh pressure (UHP) metamorphic belt. The UHP metamorphism is well dated at 220–245 Ma in the Dabie–Sulu belt but at 507 Ma in the Qinling belt. The Tongbaishan is located between the Qinling orogenic belt to the west and the Dabie–Sulu UHP metamorphic belt to the east. It is the key area for studying the tectonic relation between the Qinling and Dabie–Sulu belts and the diachronous UHP metamorphism. The Jigongshan granitic pluton (t=128 Ma) with a total area of 1200 km², composed of monzogranite, was mostly emplaced into the Tongbai complex, an exposed basement in the Tongbaishan. The Jigongshan granites have SiO₂=69.85–72.35%, K₂O/Na₂O=0.87–1.13, A/CNK=0.91–1.03, Rb/Sr=0.14–0.25 and Th/U=3.3–12. Their REE compositions show strongly fractionated patterns with (La/Yb)_N=14–58 and Eu*/Eu=0.79–1.05. The granites are characterized by low radiogenic Pb isotopic composition. The present-day whole-rock Pb isotopic ratios are ²⁰⁶Pb/²⁰⁴Pb=16.707–17.055, ²⁰⁷Pb/²⁰⁴Pb=15.239–15.326 and ²⁰⁸Pb/²⁰⁴Pb=37.587–37.853, which are similar to that of the continental lower crust. Their _Nd(t) values range from −16 to −20, and depleted-mantle Nd model ages (T_DM) from 1.8 to 2.2 Ga. The above evidence indicates that the magma of the Jigongshan granites was derived from the partial melting of the continental crust. The Pb and Nd isotopic compositions of the Jigongshan granites resemble those of the Dabie core complex in the Dabieshan but are distinct from those of the Tongbai complex in the Tongbaishan. Thus, the Dabie core complex would be the magma source of the Jigongshan granites. The result implies that the Dabie core complex is extended to the west and constitutes the unexposed basement underlaying the Tongbai complex in the Tongbaishan.     

Geochemistry of Early–Middle Palaeozoic basalts in the Hodgkinson Province: a key to tectono-magmatic evolution of the Tasman Fold Belt System in northeastern Queensland, Australia

The Palaeozoic Hodgkinson Province in northeastern Queensland, Australia, is host to Late Ordovician to Devonian rock assemblages that contain tholeiitic to calc-alkaline basalts. These basalts occur as massive fault-bounded units interspersed with marine sedimentary rocks and limestones that are metamorphosed to lower greenschist facies in the Ordovician Mulgrave, Silurian Chillagoe and Devonian Hodgkinson formations, respectively. The petrogenetic and Sm–Nd isotope characteristics of these mafic volcanic rocks were investigated to constrain the tectonic setting in which they erupted. Major, trace and rare earth element analyses were carried out on samples from these formations and intrusive dolerites. The mafic rocks can be classified as basalts and basaltic andesites with distinct MORB characteristics. Furthermore, the basalts are characterized by a slight to moderate enrichment in Th and concomitant depletion in Nb, both of which become less pronounced with basalt evolution through time. These features are consistent with decreasing volcanic arc affinity of Silurian and Devonian MORB-type basalts in the Hodgkinson Province. Sm–Nd isotope characteristics of these basalts indicate a change in source region from dominantly sub-continental lithospheric mantle in the Silurian to asthenospheric input in the Devonian. Collectively, the geochemical and isotopic characteristics of the Hodgkinson Province basalts are interpreted to reflect deposition in an evolving back-arc basin setting. The onset of basin extension was initiated in the Silurian. Accelerated basin subsidence occurred throughout the Devonian and was halted by basin inversion in the Late Devonian. Basin evolution was controlled by an eastward stepping subduction zone outboard of the Australian Craton.     

京津唐及邻区地壳结构的中新生代构造运动响应

以华北地块作为实施“国际地壳与上地幔模型计划（IGCP-474）”示范区,我们综合京津唐及邻区的8条宽角反射地震剖面地壳速度结构, 计算了该区域不同构造域上、中及下地壳平均速度和厚度.利用格里金插值技术构建上、中、下地壳平均速度、厚度和底界深度在空间上变化图像.这些图像指示出,京津唐及邻区发育沿近东西和北东两个方向展布的隆起与拗陷,发育受北东向断裂控制的断隆和断坳.这些地质构造的形成与该区域发生在中生代以来的构造运动密切相关,推断京津唐及邻区在中新生代至少发生三期较强烈的构造运动.结合区域构造研究成果得出,近东西向展布的隆起和拗陷形成于三叠纪,北东向展布的隆起和拗陷形成于侏罗纪,受北东向断裂控制的断隆和断坳则形成于白垩纪以来.由于中地壳为壳内低速层,与上、下地壳的变形规律截然不同,以塑性变形为主,造成中地壳在隆起部位厚度大、速度低,拗陷部位厚度小、速度高,其厚度较大的部位地壳强度整体降低,在后期构造运动中易发生断裂变形,进而控制京津唐及邻区现今地震活动.     

地下工程岩爆预测的综合集成方法

鉴于地下工程中岩爆预测的各种方法的局限性以及预报准确率低的现状,提出了地下工程岩爆综合集成预测的学术思路。这种学术思路将定性预测与定量预测相结合、单因素预测与多因素预测相结合,引入处理复杂性问题行之有效的非线性科学理论,对岩爆进行综合集成预测。详细介绍了岩爆预测的综合集成方法,包括：地质分析预测法、应力强度比法、层次分析—模糊评判法和神经网络法,并将其应用于雅砻江某水电站交通隧道岩爆预测中,取得了较好的效果。