矿山工程裂隙破碎带的三维地震模式识别原理及应用效果

本文从时间域、频率域、三维空间域介绍了矿山工程裂隙破碎带主要的地震运动学、动力学属性参数,包括相对振幅、波峰相位时间、相似系数、主频带能量、三维空间时间梯度和相干系数等,提出了矿山工程裂隙破碎带三维地震属性的去噪平滑、归一化、相关分析、特征变换的处理方法以及裂隙破碎带的模式识别原理与方法,并用实例说明了该方法的应用效果。结果表明:模式识别法对于解释矿山工程的裂隙破碎带是有效的,并具有广阔的应用前景。     

从洛杉矶地区地震实验计划说起

简要介绍了美国洛杉矶地震实验计划(LARSE)的研究目的、科学思路以及一些重要的研究成果。受LARSE计划实践的启发，文章对我国即将开展的城市活断层探测研究思路提出了几点科学认识：①进行深浅活动构造相结合的探测，建立直到震源深度的活动断裂立体图像；②实施折射／反射相结合的综合性探测，发展高分辨折射技术，弥补数百米-数千米深度范围成像的不足；③重要的活动断层常常具有一定的规模，在空间上构成复杂的构造格局，因此，活断层探测不能局限在城市，而应在一定的空间范围中进行。     

首都圈地区中等地震前小震活动异常特征分析

近年来首都圈地区以中等地震活动为主，本文用反映地震频率、能量、平均震级的基本参量如频率、缺震、断层总面积、地震活动度等研究该区中等地震前的活动性异常特征，发现这些异常对1999－2001年首都圈地区的中等地震有较好的对应关系，当同时出现三项低值异常后，有震预后准确率较高。这些方法对首都圈地区中等地震的短期预报有重要作用，2001年12月28日滦县M14．2级地震就是用该方法在震前做了较成功的预测。由于参量指标与地震间的映震效果具有一定的阶段性和区域性，需要用发展变化的眼光，时刻跟踪并不断调整改进所使用的参量指标，才能更好地捕获地震信息。     

论如何审核确定抗震设防要求

为使县级以上地震部门做好审核建设工程抗震设防要求工作，介绍了确定抗震设防要求的4个依据、程序、重大重要建设工程的划分依据、活动断裂分类与分级规定等。指出，确定抗震设防要求既是一项法定的行政审批工作，又是一项严谨的科学技术工作。     

河套断陷带大青山山前断裂晚第四纪古地震完整性研究

通过沿大青山山前断裂 18个探槽的古地震分析 ,分别确定了 5个段落的 2 2次古地震事件。呼和浩特段 ,距今约 1.9万a以来 7次 ,平均重复间隔时间 (2 4 6 2± 4 13)a ;毕克齐段距今 2 .2万a以来 4次 ;土左旗西段距今 1.1万a以来 4次 ,平均重复间隔时间 (2 94 8± 5 6 0 )a ;土右旗西段距今约 1.1万a以来 5次 ,平均重复间隔时间 (2 2 89± 36 0 )a ;包头段距今 2 .3万a以来 2次。由断层位移量限定法和多探槽校验法判定 ,大青山山前断裂已揭露的古地震事件还不完全代表晚第四纪全断裂的大地震活动历史。只有在呼和浩特段 1.9万a以来、土左旗西段和土右旗西段约 1.1万a以来活动历史基本完整。其它两个段落不完整。这是用这些古地震资料评价该断裂未来地震危险性 ,以及今后进一步工作时应注意的问题。     

Explosion seismic reflections from the Earth’s core

Recent seismological studies have presented evidence for the existence of a layer with ultra-low seismic velocities at the core-mantle boundary at ca. 2900 km depth. We report high-amplitude, high-frequency, and laterally coherent seismic arrivals from three nuclear explosions in Siberia. With recording station intervals of 15 km, the seismic phases are readily correlated and show the presence of a thin, ultra-low velocity zone in a region where it was not previously reported. The duration and complexity of the arrivals are inconsistent with a simple core-mantle boundary and require a hitherto unidentified, kilometre-scale, fine structure in the ultra-low velocity zone. The observations may be explained by a ca. 7 km thick, two-layer, ultra-low velocity zone with exceptional low velocities, which indicate the presence of high percentages of melt (>15%), in particular in the lower part of the zone. Waveform variation implies lateral change in the thickness and physical properties of the ultra-low velocity zone with a wavelength of less than 100 km.     

Re-discussion on the Jiaochang Arcuate Structure, Sichuan Province, and the Seismogenic Structure for Diexi Earthquake in 19331

The Jiaocbang arcuate structure is one of the numerous arcuate structural belts in Sichuan. The present paper gives a further argument about the characteristics of that arcuate structure and the new activity of the Songpinggou fault and affirms that the Songpinggou fault is an active fault in the Holocene epoch. The Diexi M7.5 earthquake took place in 1933 on the west wing of that arcuate structure, near the apex of the arc. Many authors have given quite different opinions about the genetic structure of that earthquake. The authors have made on-the-spot investigations time and again over recent years. Besides this, the authors have also further studied the shape of intensity contour lines, the distribution characteristics of ground surface seismic hazards, the left-lateral dislocation of buildings along the Songpinggou fault, the NWtrending ground fissures that developed on the ground surface after earthquake, and so on. On this basis, it is still considered that the seismogenic fault of the 1933 Diexi M7.5 earthquake was the Songpinggou fault on the west wing of the Jiaochang arcuate structure.     

Recurrence characteristics of late-quaternary strong earthquakes on the major active faults along the northern border of Ordos block

Through study on trenches, analysis of recurrence characteristics and recurrence interval cluster/gap of strong earthquakes along the major active faults on the northern border of Ordos block, we found 62 paleoearthquakes that occurred in the late Quaternary, including 33 earthquakes occurring in the Holocene. The recurrence characteristics of the paleoearthquakes are different at three levels, segments, faults, and fault zones. The strong seismic sequence on the independent segments is mostly characterized by long- and short-interval recurrences, while that on the faults and in fault zone is characterized clearly by random and cluster recurrences. Results of the moving window test indicate that the probabilities of "temporal cluster or gap", caused by random coincidence as opposed to intersegment contagion, are 64% and 70% for the Serteng piedmont fault and for the south-border fault of Wula Mountains, respectively, no clear interaction among the segments of each fault; while the probability is 26.8% for the whole fault zone, suggesting a clear interaction among the faults of this fault zone. These recurrence characteristics may imply an effect of the entire block motion on the recurrence of strong earthquakes. Moreover, the elapsed time for the Wujumeng Pass-Dongfeng Village segment of Serteng piedmont fault and the Tuzuo Banner-Wusutu and the Hohhot segments of Daqingshan piedmont fault has exceeded the average recurrence interval, hence these three segments may be the possible places for future strong earthquakes.     

Formation of Concentric Rings Around Sources

Zones of increased concentration formed by a solvent flowing from a source are considered. A matehmatical model for forming such zones is proposed. It takes into account that such a zone is composed of a set of independent particles. Hence the distribution of a substance around the source can be explained by movement of an individual particle. In the model this movement is a continuous semi-Markov process with terminal stopping at some random point in space. Parameters of the process depend on the velocity field of the flow. Forward and backward partial differential equations for the distribution density of a random stopping point of the process are derived. The forward equation is investigated for the centrally symmetric case. Solutions of the equation demonstrate either a maximum or a local minimum at the source location. In the latter case a concentric ring around the source is formed. If different substances vary in their absorption rates, they can form separable concentration zones as a family of concentric rings.     

Architecture of fault zones determined from outcrop, cores, 3-D seismic tomography and geostatistical modeling: example from the Albalá Granitic Pluton, SW Iberian Variscan Massif

The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.