抽水地面沉降预计的随机介质模型

本文视抽水引起的地面沉降为一随机过程,应用随机介质理论和土力学基本原理,建立了随机介质模型,对抽水地面沉降及变形分布进行了分析预测,计算实例表明,该模型是有铲的。     

基于互信息量与BP神经网络的中长期径流预报方法研究

针对中长期径流预报因子的选择问题,采用互信息量方法筛选预报模型输入因子,在BP神经网络模型中,分别用均方误差和互信息量作为目标函数,衡量因子复合相关关系,优化选择最终预报因子并应用于碧流河汛期径流预报中。结果表明,基于互信息量筛选的预报因子与BP神经网络模型相结合,可有效识别多个预报因子与预报量间的复合相关性,对中长期径流预报因子的选择有很好参考价值。     

渗透作用下多孔介质中循环浓度污染物的迁移过程研究

根据饱和多孔介质中考虑释放效应的一维渗透作用的可溶性污染物的迁移控制方程,通过Laplace变换和Fourier变换及其逆变换求得相应的通解形式。根据半无限体表面可溶性污染物点源注入情形下的基本解,通过积分方法得到半无限体表面圆形区域上作用循环浓度污染物后,在多孔介质内部污染物迁移过程的求解方法。作为一个典型算例,对渗透作用下循环浓度污染源引起的多孔介质中的迁移过程进行分析。算例表明,当污染源浓度为周期变化时,多孔介质内部污染物的浓度随时间增长由不稳定的周期变化过程逐渐过渡到稳定的循环过程,而某一深度处污染物浓度的相位则相应滞后。此时,稳定后的污染物浓度周期与污染源浓度周期相同。实际上,随多孔介质表面污染源浓度的周期变化,在靠近多孔介质表面一定深度范围内的污染物浓度在深度方向也呈增大或减小的交替变化过程。另一方面,在污染源循环变化过程中污染物不断向深处推进,而最终其影响范围限定在某一深度内。     

A stress and displacement discontinuity element method for elastic transversely anisotropic rock

The paper presents closed‐form solutions for stress and displacement influence functions for stress discontinuity (SD) and displacement discontinuity (DD) elements, for a two‐dimensional plane‐strain elastic, transversely anisotropic medium. The solutions for SD elements are based on Kelvin's problem and for DD elements on the concept of dipoles. Stress and displacement influence functions are derived for the following elements: constant SD, linear SD, constant DD, linear DD, square root DD, parabolic DD, constant DD surface, and linear DD surface elements. The formulations are incorporated into FROCK, a hybridized boundary element method code, and are validated by providing comparisons between the results from FROCK and the finite element code ABAQUS. A limited parametric analysis shows the effects of slight anisotropy on the stress field around the tip of a crack and of the orientation of the crack with respect to the axes of elastic symmetry. Copyright © 2014 John Wiley & Sons, Ltd.     

Mise au point d'un milieu de culture pour l'étude de l'altération de silicates en présence de Pseudomonas aeruginosa

The influence of microorganisms on mineral alteration is not easy to determine in environmental conditions, because of the difficulty to raise for comparison purposes an identical but abiotic system. Another problem in this context is the choice of reliable tracers to evaluate the alteration rate of materials during in vitro experiments. To face such difficulties, we elaborated a defined medium allowing both the growth of Pseudomonas aeruginosa and a precise measurement of the elements solubilized from the minerals. Thanks to this medium, we were able to quantitatively determine the amounts of major elements solubilized from the materials in the presence of bacterial growth, compared to a sterile system. Moreover, the analysis by ICP-MS of trace elements was possible after a chromatographic treatment, which selectively eliminated 99% of the sodium content of the medium. To cite this article: G. Aouad et al., C. R. Geoscience 337 (2005).     

A continuum model of layered rock masses with non-associative joint plasticity

Layered rock masses can be modelled either as standard, orthotropic continua if the layer bending can be neglected or as Cosserat continua if the influence of layer bending is essential. This paper presents a finite element smeared joint model based on the Cosserat theory. The layers are assumed to be elastic with equal thickness and equal mechanical properties. All the cosserat parameters are expressed through the elastic properties of layers, layer thickness and joint stiffness. Plastic-slip as well as tensile-opening of layer interface (joint) are accounted for in a manner similar to the conventional non-associative plasticity theory. As an application, the behaviour of an excavation in a layered rock mass is examined. The displacement and stress fields given by smeared joint models based on the Cosserat continuum and the conventional anisotropic continuum approaches are compared with those obtained from the discrete joint model. The conventional anisotropic continuum model is found to break-down completely when the effective shear modulus in the direction parallel to layering is low in comparison to the shear modulus of the intact layer, whereas the Cosserat model is found to be capable of accurately reproducing complex load–deflection patterns irrespective of the differences in shear moduli. © 1998 John Wiley & Sons, Ltd.     

MW5型潜水电磁打捞器在桩孔施工中的应用

通过工程实例，介绍了应用潜水电磁铁处理桩孔施工中掉铁件事故的方法及操作要领，它具有实用价值。     

用双孔热解石墨管原子吸收法测定微量金

石墨炉原子吸收法在对化探样品微量金的测试过程中存在因载气进入而使待测样品溅出的问题。利用自制的双孔热解石墨管代替普通石墨管可解决上述问题。通过大量的实验证明,仪器在最佳工作条件下,硫脲介质浓度10g·l-1、解脱时间40min时,获得检出限0 10×10-9、加标回收率为98 4%～103 7%的分析结果。     

饱和冻土中弹性体波传播特性影响参数研究

基于Leclaire对饱和双相孔隙弹性介质Biot模型的扩展,研究含有两种不同固相组分的三相多孔弹性介质中体波的传播特性。以饱和冻土为例,分析了各相体积分数、颗粒形状,接触参数等因素对波动方程中惯性参数、黏性参数、刚度参数的影响;对该三相介质模型进行了退化,分析了孔隙中只含液态水或固态冰时体波的特性;以饱和冻土为例,通过数值计算,探讨了饱和冻土中体波的相速度和衰减系数与胶结参数、接触参数、频率、饱和度、孔隙率等参数的关系。结果表明：与一般的饱和土不同,饱和冻土中存在5种体波,即3种纵波和2种横波;5种体波均具有弥散性和衰减性,且P1波、S1波弥散性和衰减性远小于P2、P3、S2波;胶结参数、饱和度、孔隙率对5种体波的传播特性影响显著,接触参数对传播特性影响较小。