利用监督分类快速提取分层设色图件中数据的方法

为了快速将分层设色图件中象元的颜色值转化为具有实际意义的属性标识或物理、化学参数值,从而提取分层设色图件中包含的数据,作者提出了根据不同颜色分量(RGB)构建颜色特征空间,基于最小距离监督分类方法快速提取分层设色图件中数据的方法。使用该方法对东半球海域海面水汽分布数据进行提取,取得了良好的效果。该方法可以广泛应用于物理海洋、环境科学、地质调查、地理信息系统建库等多个行业领域的数据提取工作中。     

基于地理格网分级法提取的中国传统村落空间分布

中国传统村落真实地记录了建筑、民俗民风和较原始的民居空间形态,是千百年来人类与自然和谐共存的生活基础。随着城市化进程加快,传统村落的存续受到了很大的挑战,为了更好地保护利用传统村落,对其进行多视角的研究尤为重要,除了微观层面的具体保护措施外,还应加强宏观层面的空间分布研究。地理格网是表达复杂地理现象、综合分析自然与人文数据、模拟地理系统功能与行为的基本方法。本文从百度影像地图提取村落坐标,并截取遥感影像作为村落点数据的判断补充,在此基础上,运用地理格网的分级法,对国家公布的三批中国传统村落(2555个)数据进行空间格局分析,结果表明：这些村落主要分布在中国东南部,如落在一级格网Ⅰ18、Ⅰ19就分别有586、781个村落,占三批传统村落总数的96.6%。通过对二级和三级格网的村落分布离散性进行分析,使传统村落的空间分布数据结构更加系统和清晰有序,为合理构建其数据库提供了框架基础。     

粉末压片-X射线荧光光谱法测定盐湖样品中的主次元素

采用粉末样品压片制样,利用波长色散X射线荧光光谱仪对盐湖样品中K、Ca、Na、Mg、Cl、SO_4~(2-)等6个主次元素(组分)含量进行测定。使用化学定值得到的样品作为人工标样,其值作为标准样品参考值,建立了X射线荧光光谱法测定盐湖样品中主次元素的方法。经验证,该分析方法的准确度完全能够满足化学分析的要求,其相对标准偏差RSD7%,分析元素结果与化学法结果的相对误差均小于5%。     

Calculation method for thickness of discontinuous boundary layer of engineering pavement

The boundary layer is a buffer layer of water and heat exchange between the atmosphere and permafrost.Based on the atmospheric boundary layer and heat transfer theory,we established a method for determining the boundary layer thickness of engineering pavement(asphalt and sand pavement)in permafrost region.The boundary layer can be divided into the Boundary Layer Above Surface(BLAS)and the Boundary Layer Below Surface(BLBS).From in-situ monitoring data,the thickness of BLAS was determined through the laminar thickness,and the thickness of BLBS was determined through ground temperature,the heat conduction function,and the mean attenuation function(α).For asphalt pavement,the BLAS thickness varied between 2.90 and 4.31 mm and that of BLBS varied between 28.00 and 45.38 cm.For sand pavement,the BLAS thickness varied between 2.55 and 3.29 mm and that of BLBS varied between 15.00 and 46.44 cm.The thickness varied with freezing and thawing processes.The boundary layer calculation method described in this paper can provide a relatively stable boundary for temperature field analysis.     

Discussion on applying an analytical method to optimize the anti-freeze design parameters for underground water pipelines in seasonally frozen areas

Adopting the quasi-three-dimensional (Quasi-3D) numerical method to optimize the anti-freeze design parameters of an underground pipeline usually involves heavy numerical calculations. Here, the fitting formulae between the safe conveyance distance (SCD) of a water pipeline and six influencing factors are established based on the lowest water temperature (LWT) along the pipeline axis direction. With reference to the current widely used anti-freeze design approaches for underground pipelines in seasonally frozen areas, this paper first analyzes the feasibility of applying the maximum frozen penetration (MFP) instead of the mean annual ground surface temperature (MAGST) and soil water content (SWC) to calculate the SCD. The results show that the SCD depends on the buried depth if the MFP is fixed and the variation of the MAGST and SWC combination does not significantly change the SCD. A comprehensive formula for the SCD is established based on the relationships between the SCD and several primary influencing factors and the interaction among them. This formula involves five easy-to-access parameters: the MFP, buried depth, pipeline diameter, flow velocity, and inlet water temperature. A comparison between the analytical method and the numerical results based on the Quasi-3D method indicates that the two methods are in good agreement overall. The analytic method can be used to optimize the anti-freeze design parameters of underground water pipelines in seasonally frozen areas under the condition of a 1.5 safety coefficient.     

Uncertainty analysis of space–time prisms based on the moment-design method

Space–time prism (STP) is an important concept for the modeling of object movements in space and time. An STP can be conceptualized as the result of the potential path of a moving object revolving around in the three-dimensional space. Though the concept has found applications in time geography, research on the analysis and propagation of uncertainty in STPs, particularly under high degree of nonlinearity, is scanty. Based on the efficiency and effectiveness of the moment-design (M-D) method, this paper proposes an approach to deal with nonlinear error propagation problems in the potential path areas (PPAs) of STPs and their intersections. Propagation of errors to the PPA and its boundary, and to the intersection of two PPAs is investigated. Performance of the proposed method is evaluated via a series of experimental studies. In comparison with the Monte Carlo method and the implicit function method, simulation results show the advantages of the M-D method in the analysis of error propagation in STPs.     

基于Neuman井流理论确定玄武岩潜水含水层渗透系数的应用——以吉林靖宇煤矿为例

全面分析研究区玄武岩潜水含水层水文地质条件的基础上,对稳定流和非稳定理论确定潜水含水层渗透系数的优缺点进行了对比,认为非稳定井流公式确定玄武岩潜水含水层渗透系数是合理的。Aquifer Test软件基于Neuman井流理论配线法求参原理,运用计算机完成了自动求参,避免了人工配线的不足。该文根据吉林靖宇煤矿研究区玄武岩潜水含水层非稳定流抽水试验,分别用Aquifer Test软件和稳定井流公式进行了求参,并对比分析得出:玄武岩含水层弹性释水作用影响时间较长,利用Neuman潜水井流公式求参可靠,且更逼近现实;用Aquifer Test软件实现了自动求参,具有操作简单规范、可比性好的优点。     

Effects of initial step height on the headcut erosion of bank gullies: a case study using a 3D photo-reconstruction method in the dry-hot valley region of southwest China

Abstract

Headcut erosion has been recognized as one of the main processes involved in gully development in the dry-hot valley region of southwest China. To examine the effect of initial step height on headcut erosion processes, three headcuts were constructed ranging in height from 0.75 to 1.25 m on an active bank gully head, and a series of scouring experiments were conducted under a flow discharge of 120 L min^?1. The morphological evolutions of the plunge pools and soil loss volume were estimated by three-dimensional photo-reconstruction methods (3D-PR). As the step height increased, the experimental results showed that: (1) the transformed potential energy and shear stress would increase by approximately 4.89 J s^?1 and 26.4 Pa on average when the step height increased 0.25 m; (2) the mean depth and width of the plunge pool exhibited obvious growth, and the morphology of the cross-section developed from approximately V-shaped to U-shaped; and (3) soil loss volume increased logarithmically, with total soil loss volumes of 0.076, 0.105 and 0.116 m³, respectively. Although the significant effects of the initial step height on headcut erosion were verified, further quantitative studies are required to quantify the mechanism of headcut erosion, especially for plunge pool erosion.     

Diagnosis of earth-fill dams by synthesised approach of sounding and surface wave method

The spatial distribution of the strength inside the earth-fill is identified by the sounding tests. In this research, the Swedish weight sounding (SWS) is employed, and the spatial high-density test is performed to identify the spatial correlation structure. Furthermore, the synthesised approach of the SWS and surface wave method, which is one of the geophysical method, is proposed to compensate the shortage of each approach. Consequently, the correlation structure of an earth-fill could be identified accurately, and the high resolution of the spatial distribution could be visualised based on the survey results.     

Applying disk-based discontinuous deformation analysis (DDA) to simulate Donghekou landslide triggered by the Wenchuan earthquake

In this paper, for the first time, disk-based discontinuous deformation analysis (DDA) is applied to simulate a real landslide triggered by an earthquake. For this purpose, the kinematic behaviour of the Donghekou landslide triggered by the Wenchuan earthquake is simulated and the results obtained using disk-based DDA are compared with actual data. The comparisons show that there is a good agreement between the results obtained using disk-based DDA and observed data. The simulation results provided an understanding of the failure behaviour and temporal evolution of the landslide. This study shows that disk-based DDA is a practical numerical tool that can be used to simulate the post-failure behaviour of landslides triggered by an earthquake.