Classification of forest land attributes using multi-source remotely sensed data

The aim of the study was to (1) examine the classification of forest land using airborne laser scanning (ALS) data, satellite images and sample plots of the Finnish National Forest Inventory (NFI) as training data and to (2) identify best performing metrics for classifying forest land attributes. Six different schemes of forest land classification were studied: land use/land cover (LU/LC) classification using both national classes and FAO (Food and Agricultural Organization of the United Nations) classes, main type, site type, peat land type and drainage status. Special interest was to test different ALS-based surface metrics in classification of forest land attributes. Field data consisted of 828 NFI plots collected in 2008–2012 in southern Finland and remotely sensed data was from summer 2010. Multinomial logistic regression was used as the classification method. Classification of LU/LC classes were highly accurate (kappa-values 0.90 and 0.91) but also the classification of site type, peat land type and drainage status succeeded moderately well (kappa-values 0.51, 0.69 and 0.52). ALS-based surface metrics were found to be the most important predictor variables in classification of LU/LC class, main type and drainage status. In best classification models of forest site types both spectral metrics from satellite data and point cloud metrics from ALS were used. In turn, in the classification of peat land types ALS point cloud metrics played the most important role. Results indicated that the prediction of site type and forest land category could be incorporated into stand level forest management inventory system in Finland.     

Impact of sub-pixel heterogeneity on modelled brightness temperature for an agricultural region

Knowledge of sub-pixel heterogeneity, particularly at the passive microwave scale, can improve the brightness temperature (and ultimately the soil moisture) estimation. However, the impact of surface heterogeneity (in terms of soil moisture, soil temperature and vegetation water content) on brightness temperature in an agricultural setting is relatively unknown. The Soil Moisture Active Passive Validation Experiment 2012 (SMAPVEX12) provided an opportunity to evaluate sub-pixel heterogeneity at the scale of a Soil Moisture Ocean Salinity (SMOS) or the Soil Moisture Active Passive (SMAP) radiometer footprint using field measured data. The first objective of this study was to determine if accounting for surface heterogeneity reduced the error between estimated brightness temperature (T_b) and T_b measured by SMOS. It was found that when accounting for variation in surface soil moisture, temperature and vegetation water content within the pixel footprint, the error between the modelled T_b and the measured T_b was less than if a homogeneous pixel were modelled. The correlation between the surface parameters and the error associated with not accounting for surface heterogeneity were investigated. It was found that there was low to moderate correlation between the error and the coefficient of variance associated with the measured soil moisture, soil temperature and vegetation volumetric water content during the field campaign. However, it was found that the correlations changed depending on the stage of vegetation growth and the amount of time following a precipitation event. At the start of the field campaign (following a precipitation event), there was strong correlation between the error and all three surface parameters (r ≥ 0.75). Following a precipitation event close to the middle of the field campaign (during which there was rapid growth in vegetation), there was strong correlation between the error and the variability in vegetation water content (r = 0.89), moderate correlation with soil moisture (r = 0.61) and low correlation with soil temperature (r = 0.26).     

北斗卫星导航系统双差动力法精密定轨及其精度分析

针对GEO卫星切向轨道分量与双差模糊度强相关的问题,对经典双差动力法进行了改进,提出联合使用载波相位和相位平滑伪距实现北斗系统精密定轨,并从理论上分析了以上处理策略的可行性及对模糊度固定的影响,然后结合北斗系统精密定轨特点,推导给出了利用QIF方法实现北斗卫星双差模糊度固定的基本原理,实测数据分析表明:联合载波相位和相位平滑伪距,既可降低相关性,又可兼顾精度,定轨效果优于经典双差动力法;利用QIF方法能够取得一定的模糊度固定效果,但受观测条件限制,北斗卫星双差模糊度固定成功率整体不高,双差模糊度固定之后对轨道的改进作用有限。     

利用引力梯度数据计算径向梯度的优化方法

根据重力梯度观测各分量的方差及协方差信息,提出了利用GOCE梯度数据计算径向重力梯度的优化方法。首先给出了径向重力梯度的计算方法,并深入分析了误差传播规律,通过建立相应的条件极值问题,给出了计算径向重力梯度最优组合因子的方法;通过模拟数据验证了本文所提出的优化因子的优越性。实际数据计算表明:相对于传统方法,采用优化组合因子可使反演所得引力位模型的累积大地水准面精度在250阶时提高约2 cm。由于径向重力梯度不仅可以用于地球引力场模型的求解,也可直接应用于地球物理问题的讨论,因此本文所提出的优化方法也可对部分地球动力学问题的讨论提供方便。     

基于混合罚函数法的多尺度电离层层析确权方法

在利用GNSS进行像素基电离层层析时,多尺度层析方法利用权重因子将反演区域不同像素层析模型结合在一起,最终得到电离层电子密度反演结果,可以有效地解决电离层层析过程中不适应问题和最终的电离层电子密度失真现象。在多尺度电离层层析中,不同像素尺度层析模型之间权重是影响最终的电离层电子密度精度的重要因素。为了获得高精度电离层层析模型,考虑到权重因子存在着等式和不等式限制条件,采用解决最优化问题的罚函数法确定不同像素尺度电离层层析模型之间的权重。通过采用实测GNSS观测数据进行电离层多尺度电离层层析,对比了多尺度层析模型的各个子模型建模精度并进行分析,同时将罚函数法获得的模型精度与其他确权方法进行了对比,该方法可以有效地应用于多尺电离层度层析,且最终的层析模型精度优于其他确权方法,更优于单尺度电离层层析模型精度。     

总体最小二乘法在相机标定中的应用

对比总体最小二乘方法与最小二乘方法在相机标定中的适用性及优越性。在相机标定中,由于像点坐标和对应的地面点坐标均存在误差,因此采用总体最小二乘方法对误差方程中的系数矩阵及观测向量同时改正,能够建立更加合理的计算模型。文中以相机标定两步法为例,通过实例解算,证明利用总体最小二乘法能够得到精度更高的相机标定参数解。     

GPS 高程转换的总体最小二乘组合方法

在现有GPS高程转换的研究中,通常只采用单一的解算方法,然而,不同的计算方法由于适用的条件不同,在对同一组数据进行解算时,解算的精度也各有优劣。针对以上问题,文中提出GPS高程转换的总体最小二乘组合方法,对多种不同的高程转换方法进行组合,运用总体最小二乘法计算不同方法的权值,结合实际工程数据,验证该方法的可行性。计算结果表明,提出的方法能够有效地提高高程转换精度。     

基于 CCD 方法的超高层建筑周日摆动监测研究

对超高层建筑塔体进行周日摆动监测,为施工投点纠偏和选择合适投点时机提供科学依据,是施工控制网竖向传递的核心问题。文中针对现有方法在自动化采集及实时表达方面的不足,基于自适应阈值激光光斑中心定位方法,自主研发基于CCD的塔体摆动监测系统,并采用倾斜仪方法与之做同步比较研究。两种方法在广州市东塔施工第三方监测中互为检核验证,具有借鉴意义。     

一种新的窗户特征提取方法研究

在建筑物立面重建中,窗户提取、结构识别是学者们研究的热点。针对建筑物特征提取的应用需求,文中提出一种基于局部搜索算法——爬山法的窗户信息提取方法,介绍研究中采用的一些原理、方法,从而可以准确有效地从激光扫描数据中提取出建筑物的窗户信息。利用本方案对地面激光扫描系统获取的建筑物实验数据进行具体的处理,并给出可视化表达结果。     

变形监测缺失数据序列灰色建模方法探讨

在测量工作中,由于气候环境、观测方法、观测仪器以及观测人员自身因素等多方面的原因,可能造成观测数据的丢失或者不完全。文中针对这类数据的处理,采用加权平均法和三次样条插值法对缺失数据进行修复,建立GM （1,1）模型,并与非等间隔预测模型进行对比。通过两组仿真数据和两组实测数据验证发现：对于呈指数增长的序列和高增长序列修复之后建模预测精度更高;三次样条插值法数据修复后GM （1,1）建模预测精度较加权平均法预测精度更高;对于低增长序列,直接采用非等间隔建模预测精度更高。