成像雷达干涉测量数据相关性与干旱-半干旱地区地表类型特征的关系

利用欧洲资源卫星1号和2号获取的重轨干涉测量雷达数据，首先进行干涉测量数据相关性估测，并结合干涉测量数据的振幅信息，开展新疆喀什试验区地表土地类型的识别与分类，区分和识别出裸土、盐碱地、灌丛、裸岩/戈壁、沼泽和水体 6类土地类型。最后通过对不同土地类型的后向散射特性和相关性的分析，探讨了干涉测量数据相关性与干旱-半干旱地区地表特征的关系。     

软土地基沉降计算的误差分析

对引起路堤荷载下软土地基沉降从竖应力、固结沉降、瞬时沉降和后期沉降的计算四个方面,常见计算方法误差的诸多因素,从受力、沉降原理上进行了详细分析并提出一些建议,以使沉降更为接近实际.     

Analysis of Post-Failure Slope Movements within the Framework of Hazard and Risk Analysis

The paper first recalls briefly a methodological framework to assess landslide hazard and risk analysis in terms of predisposition, triggering andrevealing factors. This framework, that reflects the mechanisms involved in the landslide, is based on the Geotechnical Characterisation of slope movements proposed by Vaunat et al. (1994) and Leroueil et al. (1996). The Geotechnical Characterisation can be schematized by a 3-D matrix having the following axes: types of movement; types ofmaterial; and the four stages of movement: pre-failure, failure, post-failure andreactivation. For each relevant element of this 3-D matrix, there is a characterisationsheet including: the controlling laws and parameters, the predisposition factors, thetriggering or aggravating factors, the revealing factors and the consequences of the movement. The paper focuses afterwards on the post-failure stage, which generallyis the most destructive, and on the mobility index. It is shown that this laterindex can be described as the product of sub-indices associated with failure, brittlenessof the material, ability of the soil to develop pore pressures, geometry of the moving soil mass and characteristics of the terrain. It is also shown how these aspectscan be incorporated into the Geotechnical characterisation of slope movements. This seems to provide a rational basis for examining slope movements at the post-failure stage and assessing associated risks.     

川滇黔桂76种元素地球化学图编制中分析方法与分析质量研究(一) 不同实验室产生地球化学图的相似性——以Ag、Cs、Ga、Ge为例

编制中国76种元素地球化学图将使我们首次了解元素周期表上除氢、氧及惰性气体之外所有元素在中国大陆表层的分布,川滇黔桂76种元素地球化学图的编制是这一研究项目的试点。本文以不同实验室取得的Ag、Cs、Ga、Ge分析数据为例,探索、衡量不同实验室地球化学图相似性的方法,以优选实验室进行川滇黔桂4省区约4000件组合样76种元素的大规模分析工作。     

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.     

Une méthode de quantification de la dégradation d'un escarpement de faille au cours des cycles climatiques du Quaternaire : la faille de Jobourg (Nord Cotentin,France)Quantification of a fault-scarp degradation through Quaternary: the Jobourg fault (North Cotentin,France)

The degradation of the Jobourg fault-scarp occurred by cryoclastic processes in a periglacial environment during a part of Quaternary time. An attempt of quantification indicates a bulk scarp erosion of about 39 m³ m^?2, while the head accumulated at the bottom of the fault scarp only represents 4.6 m³ m^?2. To cite this article: M. Font et al., C. R. Geoscience 334 (2002) 171–178.     

圆弧状沉积盆地与软土单覆盖层出平面地表运动对比

采用解析方法，通过圆弧状沉积盆地与同样参数的软土均匀单覆盖层的对比，研究沉积盆地对平面SH波二维散射效应和其出平面地表运动。数值对比结果表明：（1）波垂直入射时盆地中央地表位移幅值反应，其随频率变化形式与软土单覆盖层的地表运动有较强的对应性，且此时单覆盖层地表位移幅值为其下降；（2）盆地的二维散射效应特点显著波的汇聚作用使盆地中的地表运动显著放大，总体上较软土单覆盖层的地表位移幅值要大，其频域内的最大反应则明显大于单覆盖层情况，但最大反应在盆地表面出现的位置依赖于入射波角度、盆地深宽比和盆地的软硬程度；（3）沉积盆地中地表位移运动有强烈扭转效应，且随盆地变软和入射波频率增高而增强。     

昆仑山口西8.1级地震地表破裂的类型与性质

通过对昆仑山口西8．1级地震地表破裂全带的考察认为：本次地震形成的地表破裂带长达350－400km，由地震裂缝，鼓梁（包）、塌陷、陡坡等基本形态组成，属构造性破裂，并具有明显的继承性和新生性。     

有限弹性变形地壳中的地震波

地壳由半无限大的基岩上一层厚度为H^-的表土层组成，入射地震波为垂直的SH波，产生水平地面运动。当浅源大地震发生时，在极震区以外行波传播产生地面运动将使地壳介质有非线性的有限弹性变形。用小参数摄动法使非线性控制方程为线性化的小参数各阶控制方程，得出头两阶线性控制方程的解析解。     

A HORIZONTAL 2-D HYDRAULIC NUMERICAL MODEL AND IT’S APPLICATIONS TO FLOOD FORECAST

1 INTRODUCTION There were many flood disasters in China in recent years. When the water level in a river is very high, weak parts of its dike may be destroyed resulted in the submersion of the protected land and properties. It is of significance for decision-makers to exactly predict the processes of flood propagation during flood control. There are many modes of dike bursting, such as seepage destroying by overflow on top of dike caused by dike body sinking induced by piping and soil fl…