区域航空γ能谱场地球化学解释及预测方法的探讨

本文以“铀矿区域评价准则”为依据,试用因子分析主成分比值法,铀对钍(钾)的区域相对场法和铀成矿有利指数法,对我国YW-10和YW-10B两个测区的区域航空γ能谱场进行了地球化学解释及预测方法的研究,与已知矿区660测区从宏观上做了对比分析,并研究了γ能谱参数在走向长270km,宽50—70km空间上的分布变化规律。研究结果表明,这些方法对了解成岩时原始铀的分布及后期铀的地球化学活动规律,估计成岩、成矿阶段铀源岩可能提供的生铀量,识别铀成矿有利地区是有用的。     

A new technique for determining the surface level of salt marshes and other uncompacted sedimentary environments

The method described involves the use of an electro-optical distance measurer mounted on a theodolite. Observations are taken onto a series of acrylic reflectors, aligned at right angles to the line of sight, and slope distances and vertical and horizontal angles are recorded. From these data it is possible to obtain surface heights to an accuracy of ±0·5 cm at 200 m and to avoid any direct disturbance of the site under investigation.     

Growth Of The Summer Daytime Convective Boundary Layer At Anand

The heights of the daytime convective boundary layer (CBL), computed by a one-dimensional model for a bare soil surface at a semi-arid station,Anand, during the dry and hot summer month of May 1997, are presented. As input, the model requires surface heat flux, friction velocity and air temperature as functions of time. Temperature data at the one-metre level from a tower and sonic anemometer data at 9.5 m collected during the period 13–17 May 1997 in the Land Surface Processes Experiment (LASPEX-97) are used to compute hourly values of surface heat flux, friction velocity and Obukhov length following the operational method suggested by Holtslag and Van Ulden [J. Climate Appl. Meteorol. 22,517–529 (1983)]. The model has been tested with different values for the potential temperature gradient ( ) above the inversion. The model-estimated CBL heights comparefavourably with observed heights obtained from radiosonde ascents.     

鲜水河断裂带的构造大地测量

利用短边GPS点阵、短基线标石阵和精密激光测距 ,在与鲜水河断裂带的断层破裂带垂直的剖面上和构造盆地内进行构造大地测量 ,获得了断层软弱带和断层蠕变带上的最佳形变分布。综合利用相关地学成果和理论 ,揭示了构造形变所隐含的动力学信息 ,识别了断层应变带、塑性流变带和主断面在地面的分布范围。用外围GPS远场联测成果探讨了该断裂带的驱动力机制 ,匡正了其“左旋”运动和现今活动速度的含义。最后 ,评估了该断裂的地震活动趋势     

“准地籍测量”—一种有效的地籍测量模式

“准地籍测量”是在已有的地形图上根据地籍台帐于实地标绘宗地界域线,划分街道、街坊、调查区及编号,调查宗地座落、地名、门牌号码、房屋结构及层数等;基于这种测量模式,其成果以传统的图、表展示已很难适应。实践运用MGE地理信息基础平台开发出的地籍信息管理系统,其准地籍测量约70％的宗地成果与实际确权一致,不失为一种快速、经济有效的地籍测量模式。     

On the nonlinear dynamics of the boundary layer of intense atmospheric vortex

The paper describes a stationary model of the boundary layer of a large-scale vortex. The model takes into account two types of nonlinearities: (1) advection of the momentum and centrifugal accelerations, that is related to large values of the Rossby number; (2) a nonlinear turbulent friction on the lower boundary (generally speaking, not only quadratic, but also more complicated). Nevertheless, the model may be studied analytically. This approach allows discovery and analysis of several universal regularities, which are not revealed by numerical modeling. The model provides the actual values for the speed of the surface wind and the angle of cross-isobar surface flow in the tropical cyclones.     

跨断裂水准剖面观测在地震监测中的应用

由于活动地块的相对运动和变形，其边界带往往构造活动强烈，是反映地壳运动的敏感部位。基于上述思路，昆仑山口西8．1级大震发生后，通过大范围监测布设在青藏块体北部地区及周边主要构造带上的水准剖面，在短期内快速获取了大范围的断裂活动信息和不同断裂带对大区域构造应力场变化的响应特征。实践证明，这种监测方式灵活、作业周期短、资料处理快，能及时对震情趋势做出估计，不失为当前区域形变监测工作的一种新的探索。     

不同地球化学景观区的化探方法及实例

总结了最近20多年来化探在找矿过程中起到的重要作用,重点介绍了不同地球化学景观条件下最佳化探找矿方法及实例,为以后的找矿工作提供切实可行的方法,从而达到快速、经济、效果显著的目的.     

福建东山坑北复式岩体的地质特征及其变质变形作用

在平潭—东山构造带南段深变质的东亚带和浅变质的西亚带的过渡带．出露一套变质变形特征极其复杂的动力变质岩系。其主体是一个由早侏罗世、晚侏罗世及晚侏罗世—早白垩世石英闪长岩、花岗闪长岩、二长花岗岩、正长花岗岩等组成的坑北复式岩体。该岩体可划分6个基本单元，并与区域上同时代侵入岩的谱系单位划分进行对比，归并为东山序列、古美山、漳浦超单元。该区发育三期韧-(脆)性变形及动力变质作用。据R1-R2图解及巴尔巴林岩浆构造分类．坑北复式岩体中各超单元(单元)侵入岩分别形成于不同的构造环境。     

福建岭头坪铅锌金银多金属矿地质特征及远景分析

岭头坪铅锌金银多金属矿产于南园组第二、三段中酸-酸性火山碎屑岩的夹层中,矿体呈似层状,受断裂构造及层间破碎带控制.成矿与中生代火山活动紧密相关,可能为中低温火山热液矿床.从成矿地质条件和金土壤异常分析,岭头坪矿区的周围及南、东侧以及石笋歧一带有很好的找矿前景.