吉南早元古代集安群构造解析

早元古代集安群经历了三期构造变形，分别形成了三个特征各异的构造形迹组合。Ⅰ世代为层理褶皱组合，由平卧褶皱、轴面片理和韧性剪切变形带组成；Ⅱ和Ⅲ世代为片理褶皱组合，分别由各种位态的片理褶皱和轴面褶劈理、膝折面理组成；Ⅰ、Ⅱ世代的原始构造线方位均为近南北向，为近共轴叠加，但因Ⅲ世代构造的强烈改造，现今多变位为东西向。Ⅰ世代构造形迹组合的特征显示集安群的早期构造环境具有构造层次较深、以近水平韧性剪切变形作用为主导的特点。     

山东济阳帚状构造体系与油气聚集

本文阐述了济阳帚状构造体系的特点及其内部油气分布特征,并从济阳帚状构造体系的形成与演化的角度分析了该构造体系与油气形成与分布的关系,认为济阳帚状构造体系是多期旋扭复合作用的结果,它控制了油气的形成、运移和聚集,研究表明油气在帚状构造体系的撒开端富集,而在收剑端相对贫乏。      

新疆库车地区秋里塔格构造带成因分析

秋里塔格构造带位于库车前陆逆冲带前锋,区域构造位置介于库车坳陷三叠-侏罗系烃源岩生排烃中心与塔北前缘隆起带之间,第三系广泛分布两套膏盐岩层,发育多套储盖组合和复杂的构造样式,石油地质条件非常优越.本文在分析3个区带的变形特征基础上,探讨了盐上层和盐下层的构造成因,认为盐上层的构造成因与盐层的流动性有关,西段变形比东段强烈;盐下层构造成因东、西差异较大,东段与盐层的塑性变形无关,西段则受其影响.     

9: Processes of tectonism, magmatism and mineralization: Lessons from Europe

Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden.     

Influence of tectonic structures on the Hope Slide, British Columbia, Canada

The Hope Slide, which occurred on January 9, 1965, involved an estimated 47-Mm³ of meta-volcanics and intrusive rocks. Previous workers reported the presence of tectonic structures (faults and shear zones) along the failure surface at the Hope Slide. These tectonic features were investigated in detail to assess their effects on rock-mass quality and the related implications for slope stability. This paper integrates basic field and laboratory concepts from structural and engineering geology. Subdividing the failure area into structural domains allowed distinct discontinuity sets to be associated with specific tectonic structures. The Geological Strength Index (GSI) was used to estimate the rock-mass damage related to the tectonic structures. Low GSI values were seen to outline tectonic damage zones. Point-load tests were used to characterise the compressive strength of rocks adjacent to the tectonic structures. Strength anisotropy, tentatively attributed to damage caused by a large shear zone, was observed in greenstone samples. Seepage zones along the failure surface were observed preferentially along shallow discontinuities that dipped downslope and in rock masses of good quality (GSI > 40). An alternative morphology of the slope failure is proposed by distinguishing between the extent of the surficial damage due to the rock-slope failure and the zone of failed material (depletion zone). For the first time, a kinematic mechanism for the Hope Slide is proposed, based on a preliminary 3-dimensional block model. A pre-1965 DEM was produced from estimates of material lost and gained as reported by previous workers. The pre-1965 DEM revealed that the tectonic structures recognised during fieldwork bounded the material that failed in the 1965 event.     

库车坳陷克拉苏构造带协同变形机制及盆山耦合关系

克拉苏构造带构造非常复杂,经过30余年的油气勘探开发,构造规律不清楚、构造圈闭不落实的问题仍然非常突出。本文通过大量三维地震资料的构造解释、建模及实钻资料验证,发现克拉苏构造带在剖面上呈分段分层变形、平面上呈雁列式展布特征。提出克拉苏构造带两种协同变形机制,较好地解释了在膏盐层调节作用下盐上、盐层、盐下3个构造层的差异变形现象。结合遥感影像及重力异常影像分析了盆山耦合关系,提出了南天山造山带的差异隆升推覆作用,南部温宿、新和、牙哈古隆起的阻挡作用和古近系膏盐层的调节作用是变形的3个主要影响因素,并据此较好地解释了克拉苏构造带构造圈闭平面展布格局。     

阿姆河右岸东南部吉萨尔山前中下侏罗统构造格架及成因分析

以现有地质及地震资料为基础,对阿姆河右岸区块东南部靠近吉萨尔山前地区的中下侏罗统主要构造特征进行探讨,一方面有利于促进该区中下侏罗统油气勘探,同时也有利于深化对造山带向盆地过渡的山前地区构造变形规律的认识。研究表明：该区中下侏罗统整体表现为由三列近似呈雁行状排列的NE向背斜带组成的褶皱-冲断构造。从控制背斜构造发育的断裂活动特征看,东部山前断层表现为由南东向北西方向逆冲,活动强度大,向西逆断层运动的强度逐渐减弱,且由南向北西部断层的逆冲运动方向发生反向变化,在研究区的北部发育典型的构造三角带。西部背斜带可视为断裂运动方式由南向北变化导致的调节构造。沿构造带走向,三列背斜构造高点由南向北逐渐升高。通过对中下侏罗统构造变形与上覆地层构造特征的比较,结合该区侏罗系沉积特征,认为中下侏罗统构造变形是与上覆地层构造变形共同形成于新近纪喜山期统一的区域构造运动背景下。其主要构造变形机制是晚古近-新近纪以来,在印度板块、阿拉伯板块和欧亚板块碰撞远程效应影响下,受吉萨尔山脉的隆升挤压和研究区北部NW向的大型断裂如布哈拉断裂、曼格什拉克断裂的右旋压扭共同作用而成。     

Preservation of Palaeoproterozoic early Svecofennian structures in the Orijärvi area, SW Finland—Evidence for polyphase strain partitioning

The predominantly migmatitic Palaeoproterozoic Uusimaa belt preserves early lower-grade Svecofennian structures in the Orijärvi area in SW Finland. This study aims at explaining the deformational history responsible for its preservation and also at defining the age of the early Svecofennian deformation. Detailed structural analysis reveals that the preservation was enabled by polyphase strain partitioning, which initiated during the early Svecofennian D₂ deformation, 1875 Ma ago, as revealed by ion microprobe U–Pb data on zircons from granodioritic and intermediate syn-D₂ intrusive dykes. The D₂ structures were low-strain upright folds at high crustal levels and sub-horizontal high-strain folds at deeper crustal levels. The sub-horizontal D₂ structures were refolded into upright folds during the subsequent late Svecofennian D₃ deformation, whereas the upright D₂ structures behaved as almost rigid blocks that caused strain partitioning into high-strain zones along the block margins. This accounts for the low cumulative strain in specific parts of the Orijärvi area. Further strain partitioning during D₄ caused reverse dip-slip movements along regional-scale shear zones. Crustal depth controlled the metamorphic grade during D₂, when local migmatisation took place at deep crustal levels. Later metamorphic overprint during D₃ deformation is evident from post-D₂ growth of sillimanite and a second generation of andalusite.Similarities in the structural patterns between the Orijärvi area and the Tampere-Vammala area (100 km to the north) suggest that irrespective of the age of the later overprint, subsequent deformation was localised along the margins of the early formed upright domains, while the low-grade rocks within the domains were preserved.     

基于土体中结构面的岩土工程问题探讨

.