用远震接收函数研究滇西地区的深部结构

滇西地区地处欧亚板块碰撞或俯冲的边界地带，曾受到多期构造运动的影响，其地质环境和构造背景十分复杂，是我国地震活动比较活跃的地区之一. 本文选用国家、地方和流动数字台网的16个台站的远震记录. 其中PASSCAL甚宽频带流动地震台站4个，提取有效接收函数近2 000条. 两条测线的直线距离分别为650 km和450 km， 横切了滇西地区的一些主要构造单元. 研究表明，怒江断裂可能是一条具有俯冲性质的缝合线. 川滇菱形块体东西两侧的分界线¾红河断裂和小江断裂可能是直立的缝合线或碰撞带. 攀西构造带仍具有大陆裂谷的特征，即地表凹陷、上地幔隆起. 滇西地区的构造格局具有一定的规律性，造山带与缝合线相间分布. 滇西地区由北向南地壳厚度渐次减薄，S波速度整体偏低.      

华北地区700年来地壳应力场演化与地震的关系研究

目前地震断层相互作用问题已引起地震学家的广泛关注。许多研究表明一条断层的破裂可以影响附近其他断层趋于破裂的进程，两条断层间的确切作用取决于它们的相对位置、破裂机制、错动量和介质力学性质。本研究给出了华北地区700年来由于长期构造加载及地震断层错动导致的累积库仑破裂应力变化(ACCFS)的演化过程。长期构造加载场由GPS观测得到的地壳平均应变率场给出。关于历史地震断层破裂参数的估算，根据的是华北地区有现代仪器记录的大震资料归算地震烈度与断层破裂长度、震级和地震矩的统计关系；根据地质调查得到的地震断层走向、倾角以及本地区的构造应力场方向估计滑动角。考虑粘弹性成层介质地壳模型，计算长期构造加载和地震形变(同震及震后介质粘弹性驰豫变形)造成的累积应力场变化。将累积应力场变化投影到后续地震断层面和滑动方向上得到△CCFS，并研究其对后续地震发生的触发作用。对1303年以来华北地区发生的49个M≥6．5地震研究结果表明：ACCFS对48个后续地震中的38个有触发作用，触发率达到79．2％。应用当今累积应力场变化于华北地区1303年-2003年发生的M≥5地震，我们发现触发率达到75．5％，于1976年以来发生的M≥5地震触发率达82．1％。未被触发的地震中有些是发生在断层破裂区附近的余震，很可能是由于历史地震破裂参量估计的误差落入影区中，若排除这些影响，触发率会更高。研究表明ACCFS与发生的后续地震有很好的相关性。当前ACCFS显著上升的地区包括渤海及其邻域地区、西秦岭北缘断裂带、张家口-渤海地震带西端和太原盆地，其地震危险性应引起重视。     

岩质高边坡岩体变形参数及松弛带厚度研究

预测岩质高边坡开挖后岩体变形模量的变化及松弛带厚度，是分析岩质高边坡在开挖后变形（位移）和作好防护设计的重要资料，运用波动力学关于平均应力与体积模量、岩体纵波速度与弹性模量、变形模量间的关系，通过部分实测资料及边坡应力场有限元分析的资料，分别建立了纵波速度与岩体变形模、岩体应力间的关系，研究了开挖边坡岩体变形模量的变化，预测了岩体松弛带的厚度。     

A new method of testing pile using dynamic P-S-curve made by amplitude of wave train

A new method of detecting the vertical bearing capacity for single-pile with high strain is discussed in this paper. A heavy hammer or a small type of rocket is used to strike the pile top and the detectors are used to record vibration graphs. An expression of higher degree of strain (deformation force) is introduced. It is testified theoretically that the displacement, velocity and acceleration cannot be obtained by simple integral acceleration and differential velocity when long displacement and high strain exist, namely when the pile phase generates a whole slip relative to the soil body. That is to say that there are non-linear relations between them. It is educed accordingly that the force P and displacement S are calculated from the amplitude of wave train and (dynamic) P-S curve is drew so as to determine the yield points. Further, a method of determining the vertical bearing capacity for single-pile is discussed. A static load test is utilized to check the result of dynamic test and determine the correlative constants of dynamic-static P(Q)-S curve. Foundation item: Key projects of the tenth Five-year Plan of Yunnan Province (documented Yunnan district [2002]54-02-02) and Geophysical Society of Yunnan Province.     

Geometric form of Haiyuan fault zone in the crustal interior and dynamics implications

The deep seismic reflection data on profile HY2 are reprocessed by the method of simultaneous inversion of velocity distribution and interface position. By the travel-time inversion with the data of the diving wave Pg and fault plane reflection wave, we determine the geometric form and velocity of Haiyuan fault zone interior and surrounding rock down to 10 km depth. The measured data show that the amplitudes have strong attenuation in the range of stake number 37–39 km, suggesting the fault zone has considerable width in the crustal interior. The results of this paper indicate that to the north of the fault zone the crystalline basement interface upheaves gradually from southwest to northeast and becomes shallow gradually towards northeast, and that to the south of the fault zone, within the basin between Xihua and Nanhua mountains, the folded basement becomes shallow gradually towards southwest. The obliquity of the fault zone is about 70° above the 3 km depth, about 60° in the range of the 3–10 km depths. From the results of this paper and other various citations, we believe that Haiyuan fault zone is in steep state from the Earth’s surface to the depth of 10 km. Foundation item: Joint Seismological Science Foundation of China (201001) and State Key Basic Research Development and Programming Project (95-13-02-02). Contribution No. RCEG200308, Exploration Geophysical Center, China Earthquake Administration.     

Field vibration mitigation by honeycomb WIB for pile foundations of a high-speed train viaduct

Environmental vibrations from recent high-speed trains are becoming a special concern in the civil and environmental engineering field since they can give detrimental effects to residents, sensitive equipments and high-tech production facilities in the vicinity of train tacks. Herein, aiming at the vibration mitigation for a specific high-tech industrial area, the low-frequency vibrations from a train viaduct are targeted over an anticipated range. A theoretically designed innovative countermeasure, called honeycomb wave impeding barrier (WIB) for a wave impeding barrier, is introduced and its effects are investigated by computer simulation. The present WIB is based on the wave dispersion phenomenon that can modulate the incoming wavelengths into the shorter wavelengths, creating an apparent wave cut-off characteristic in the wave field across WIB installation area. The shorter wavelengths are further impeded due to the impedance ratio of the WIB walls and in-fill materials and absorbed by the in-fills more. The three-dimensional FEM simulation demonstrates a dramatic reduction effect that is difficult to achieve by conventional measures.     

Determination of S-wave velocity structure using microtremors and spac method applied in Thessaloniki (Greece)

Array measurements of microtremors at 16 sites in the city of Thessaloniki were performed to estimate the V_s velocity of soil formations for site effect analysis. The spatial autocorrelation method was used to determine phase velocity dispersion curves in the frequency range from 0.8–1.5 to 6–7 Hz. A Rayleigh wave inversion technique (stochastic method) was subsequently applied to determine the Vs profiles at all the examined sites. The determination of V_s profiles reached a depth of 320 m. Comparisons with V_s values from cross-hole tests at the same sites proved the reliability of the SPAC method. The accuracy of the V_s profiles, the ability to reach large penetration depths in densely populated urban areas and its low cost compared to conventional geophysical prospecting, make Mictrotremor Exploration Method very attractive and useful for microzonation and site effects studies. An example of its application for the site characterization in Thessaloniki is presented herein.     

In-plane and anti-plane strong shaking of soil systems and structures

The concept of in-plane and anti-plane shaking is introduced with a rigid block on a plane surface with Coulomb friction. Using a hypoplastic constitutive relation to model the mechanical behaviour of the soil, numerical solutions for a rigid block on a thin dry or saturated soil layer are obtained. The coupled nature of dynamic problems involving granular materials is shown, i.e. the motion of the block changes the soil state—skeleton stresses and density—which in turn affects the block motion. Motions of the block as well as soil response can be more realistically calculated by the new model. The same constitutive equation is applied to the numerical simulation of the propagation of plane waves in homogeneous and layered level soil deposits induced by a wave coming from below. Experiments with a novel laminar shake box as well as real seismic records from well-documented sites during strong earthquakes are used to verify the adequacy of the hypoplasticity-based numerical model for the prediction of soil response during strong earthquakes. The response of a homogeneous earth dam subjected to in-plane and anti-plane shaking is investigated numerically. In-plane and anti-plane shaking is shown to cause nearly the same spreading of a sand dam under drained conditions, whereas under undrained conditions anti-plane shaking causes stronger spreading of the dam. The dynamic behaviour of a breakwater founded on rockfill and soft clay during the 1995 Kobe earthquake is back-calculated to show the good performance of the proposed numerical model also with a structure. Section 9 deals with buildings on mattresses of densified cohesionless soils or fine-grained soils with granular columns, slopes with ‘hidden’ dams and structures on piles traversing clayey slopes to show the suitability of hypoplasticity-based models for the earthquake-resistant design and safety assessment of geotechnical systems.     

Evaluation of soil liquefaction in the Chi-Chi, Taiwan earthquake using CPT

During the 1999 Chi-Chi, Taiwan earthquake, many sand boiling phenomena were observed in central Taiwan, which caused severe ground settlement and structure damages. According to the installed accelerograms, the peak ground surface horizontal accelerations in the liquefaction-affected areas range from 774.42 to 121.3 gal. The writers carried out an extensive investigation of soil liquefaction in this earthquake. In this paper, we present results of the CPT exploration and post-earthquake liquefaction analysis. Two hundred and seventy five (275) cone penetration test data were collected from the liquefaction-affected areas, and 46 liquefaction case histories and 88 non-liquefaction case histories were derived that can be used to evaluate the accuracy of existing liquefaction evaluation models. In addition, the strength of the liquefied soils after earthquake and the implication of its liquefaction potential in the future event are discussed.     

Are open fractures necessarily aligned with maximum horizontal stress?

Fluid flow in fractured rock is an increasingly central issue in recovering water and hydrocarbon supplies and geothermal energy, in predicting flow of pollutants underground, in engineering structures, and in understanding large-scale crustal behaviour. Conventional wisdom assumes that fluids prefer to flow along fractures oriented parallel or nearly parallel to modern-day maximum horizontal compressive stress, or S_Hmax. The reasoning is that these fractures have the lowest normal stresses across them and therefore provide the least resistance to flow. For example, this view governs how geophysicists design and interpret seismic experiments to probe fracture fluid pathways in the deep subsurface. Contrary to these widely held views, here we use core, stress measurement, and fluid flow data to show that S_Hmax does not necessarily coincide with the direction of open natural fractures in the subsurface (>3 km depth). Consequently, in situ stress direction cannot be considered to predict or control the direction of maximum permeability in rock. Where effective stress is compressive and fractures are expected to be closed, chemical alteration dictates location of open conduits, either preserving or destroying fracture flow pathways no matter their orientation.