Test and numerical research on wall deflections induced by pre-excavation dewatering

Numerous studies have been devoted to the performance of excavations and adjacent facilities. In contrast, few studies have focused on retaining wall deflections induced by pre-excavation dewatering. However, considerable inward cantilever deflections were observed for a diaphragm wall in a pre-excavation dewatering test based on a long and narrow metro excavation, and the maximum deflection reached 10 mm (37.6% of the allowable wall deflection for the project). Based on the test results, a three-dimensional soil–fluid coupled finite element model was established and used to study the mechanism of the dewatering-induced diaphragm wall deflections. Numerical results indicated that the diaphragm wall deflection results from three factors: (1) the seepage force around the dewatering well and the soil–wall interaction caused the inward horizontal displacement of the soil inside the excavation; (2) the reduced total earth pressure on the excavated side of the diaphragm wall above approximately 1/2 of the maximum dewatering depth disequilibrated the original earth pressure on both sides of the diaphragm wall; and (3) the different negative friction on the excavated and retained sides of the diaphragm wall led to the rotation of the diaphragm wall into the excavation.     

典型黄土坡面土壤侵蚀特征及径流流速空间变化试验研究

为了明确土壤性质对坡面侵蚀方式作用机制的影响,本研究采用室内模拟降雨试验,选取黄土高原典型暴雨强度,在不同坡度条件下,对两种黄土的坡面侵蚀方式、形态特征、产流产沙过程及其相应径流流速的变化规律进行了研究。结果表明,绥德土径流量明显高于安塞土,10º、15º和20º时前者的平均径流量分别比后者高出51.1%、55.5%和63.0%,且前者更易形成细沟,使得其平均含沙量和平均产沙率分别是后者的1.14~3.59倍和2.50~8.48倍。在片蚀阶段,与绥德土相比,安塞土的含沙量较高,后者的平均含沙量是前者的1.24~1.73倍,但两种土壤的含沙量和产沙规律相同,均表现为先快速增加到最大值,然后逐渐降低到相对稳定状态,该现象证明片蚀的初期阶段主要受控于径流输沙能力,后期受径流的剥蚀能力控制。在细沟侵蚀阶段,绥德土细沟发育以沟头溯源侵蚀为主,崩塌作用频繁,该侵蚀形式不仅控制着细沟形态的总体特征,也导致含沙量和产沙率均急剧增加,该阶段平均含沙量是相应片蚀阶段的3.25~4.34倍。细沟沟口下方坡面存在明显的泥沙沉积带,表明细沟集中水流的搬运能力远高于坡面漫流,细沟侵蚀主要受径流输沙能力控制。两种土壤的径流流速均表现为坡面下部高于坡面上部,径流稳定后高于径流稳定前,总体来看,绥德土和安塞土上坡和径流稳定后的平均流速分别是下坡和径流稳定前的1.4倍、1.25倍和1.75倍、1.29倍,此外细沟侵蚀或侵蚀强度与微地貌形态之间的互馈作用对径流流速也有较大影响。     

Generalized Hough transform for the stress inversion of calcite twin data

Since the mechanical twinning along calcite e-planes has a critical resolved shear stress, not only principal stress axes but also differential stress can be determined from the orientations of twin lamellae. Based on the five-dimensional stress space that fulfills the principle of coordinate invariance, it is shown in this article that the inversion of twin and untwin data is comparable with fitting a spherical cap to data points on a unit sphere in the space. The principal stress orientations and stress ratio are indicated by the center of the cap, whereas differential stress is denoted by the size of the cap. Based on this geometrical interpretation, the generalized Hough transform was applied to the inversion of the data in this study. The new method is demonstrated to be robust to sampling bias, variability in the critical resolved shear stress. The determination of differential stress was difficult when the differential stress to be detected was ∼10 times larger than the critical resolved shear stress. Stresses were separated by the method from heterogeneous data successfully as long as the spherical caps corresponding to the stresses to be detected had no or a small intersection.     

THE HYDROLOGICAL CHARACTERISTICS AND WATER BUDGET OF QINGHAI LAKE DRAINAGE BASIN

The rapid shrinkage of the surface area reflects the long-term deficit water budget of Qinghai Lake. Study of the yearly hydrology and meteorology in the lake catchment basin and the hydrologic factors as well as water budget led to the conclusion that evaporation exceeding the water input resulted in the drop of lake level, thai the obvious decrease of runoff to the lake and precipitation on the catchment accelerated the falling of lake level before 1987. and that increase of about 6.7% in rainfall on the whole basin will balance the lake's water budget.     

资源环境系列制图研究的现实基础与发展

本文侧重于全国性资源环境及有关自然条件等专题制图工作的现实基础和成就,作简要总结和回顾。针对提高和重新认识制图效益和重点进行讨论,提出科学效益是基础,社会效益是目的,经济效益是根本,为资源环境的合理开发利用提供依据,并提出今后发展设想。     

Lithospheric flexure, uplift and expected horizontal strain rate in the Pannonian Carpathian region

The Apuseni Mountains are located between the Pannonian Basin and the Transylvanian Basin along a direction of SE convergence with the Carpathian belt. A flexural model based on the cylindrical bending of a semi-infinite, isostatically supported, thin elastic plate is here examined with the Apuseni playing the role of flexural bulge, and under the assumption that the plate is deforming under the action of a vertical shear force and a bending moment applied at the end of the plate, beneath the Carpathians. The model yields estimates of the plate thickness ranging between 13 and 14.5 km, depending on the assumed density contrast between crust/sediments and mantle providing buoyancy. The vertical shear force which is necessary to bend the plate is in the range between 60 and 300 × 10¹¹ N m^− 1, depending on the assumed density contrast. This force is shown to be modelled by a gravitational ‘slab pull’ force, using model parameters derived from seismic tomography. If the height of the flexural bulge, after correction for erosion, is allowed to increase, the model yields an estimate of the horizontal strain rate at the top of the bulge. For example, 5 mm/yr vertical change of the flexural bulge of a 14 km thick plate results in a horizontal deformation rate of approximately 7 nanostrain/yr at the top of the bulge, a value which is at the threshold of sensitivity of continuous GPS measurements. Different vertical rates will change the horizontal strain rate almost proportionally.     

Stress Measurement by Overcoring at Shallow Depths in a Rock Slope: the Scattering of Input Data and Results

This paper describes a field experiment of stress measurement using the overcoring method performed in a rock slope, called Rochers de Valabres (located in France’s Southern Alps Region), a field laboratory site prone to rockfalls. Six measurements were conducted at shallow depths from the surface, moving deeper along a sub-horizontal borehole. The experiment was conducted in heterogeneous and anisotropic gneiss, with the overcored rock elastic properties, as evaluated by biaxial and uniaxial tests, being widely scattered. Since stress calculations are sensitive to all input data uncertainties, strain inversion was, thus, performed using an experimental device and Monte Carlo simulations. The experimental device allows the assessment of rather broad confidence intervals for both stress magnitude and orientation. The results indicate that the stress state in the surface area is quite heterogeneous and may be correlated with topography. The measurements show a nonlinear stress distribution with distance to the free surface, along with high values of principal stresses, despite the vicinity of the surface. Although influenced by local topography, orientations of the principal computed stresses are characterized by a high turnover due to local heterogeneities. The results are roughly in accordance to a 2D finite element model of the site.     

应用地震学方法研究中国大陆活动地块应力应变场

在中国大陆活动地块假说及活动边界研究的基础上，将中国大陆按照地震活动特征进行分区. 利用大地震的震源机制资料和历史强震资料，结合小震综合节面解，研究了各地震区的应力应变状态，给出了各地震区的平均应力主轴方向和平均应变率. 应用地震应变能积累释放模型研究了各地震区的地震活动水平. 结果表明最大剪切应变率与地震活动水平存在线性关系. 将地震资料给出的中国大陆地壳应力应变场与GPS测量给出的结果进行了比较，初步说明了两种结果存在着统一性，从而显示出活动地块运动变形与强震活动的内在联系.     

反倾层状边坡弯曲折断的应力及挠度判据

以地质分析为基础 ,将反倾层状边坡的任意岩层概化为受复合作用力的板梁模型 ,通过简单的力学解析 ,开展了反倾层状岩石边坡弯曲折断判据的研究。依据岩层折断时和相临岩层的瞬时关系 ,将岩层下部视为瞬时临空状态 ,考虑岩层自重荷载和上部岩层附加荷载 (上部岩层重力荷载、层间摩擦力 )的共同作用 ,基于最大拉应力准则 ,提出了岩层弯曲折断的应力判据 ;依据应力判据 ,得到了岩层弯曲折断的挠度判据 ;利用应力判据及挠度判据 ,可实现反倾层状边坡弯曲折断的现场判定及其控制设计     

UDEC软件对矿山采空区崩塌过程进行应力分布的研究

为了研究矿山采空区坡体的应力(裂隙)分布情况,并对崩塌过程分析进行检验,本文采用离散元数值软件(UDEC)对纳雍县张家湾镇普洒煤矿采煤过程中覆岩裂隙发生、发展及其变化过程进行模拟。结果表明:随着煤层开采的推进,覆岩裂隙向上发展且密度逐渐增多;由于采空区范围过大时,部分被重新压实,裂隙发育至地表形成开切眼;最后在外力作用下整条裂缝垂直贯通,形成危岩体的发展规律,可为类似的矿山地质灾害防治提供基础依据。