资源环境系列制图研究的现实基础与发展

本文侧重于全国性资源环境及有关自然条件等专题制图工作的现实基础和成就,作简要总结和回顾。针对提高和重新认识制图效益和重点进行讨论,提出科学效益是基础,社会效益是目的,经济效益是根本,为资源环境的合理开发利用提供依据,并提出今后发展设想。     

Lithospheric flexure, uplift and expected horizontal strain rate in the Pannonian Carpathian region

The Apuseni Mountains are located between the Pannonian Basin and the Transylvanian Basin along a direction of SE convergence with the Carpathian belt. A flexural model based on the cylindrical bending of a semi-infinite, isostatically supported, thin elastic plate is here examined with the Apuseni playing the role of flexural bulge, and under the assumption that the plate is deforming under the action of a vertical shear force and a bending moment applied at the end of the plate, beneath the Carpathians. The model yields estimates of the plate thickness ranging between 13 and 14.5 km, depending on the assumed density contrast between crust/sediments and mantle providing buoyancy. The vertical shear force which is necessary to bend the plate is in the range between 60 and 300 × 10¹¹ N m^− 1, depending on the assumed density contrast. This force is shown to be modelled by a gravitational ‘slab pull’ force, using model parameters derived from seismic tomography. If the height of the flexural bulge, after correction for erosion, is allowed to increase, the model yields an estimate of the horizontal strain rate at the top of the bulge. For example, 5 mm/yr vertical change of the flexural bulge of a 14 km thick plate results in a horizontal deformation rate of approximately 7 nanostrain/yr at the top of the bulge, a value which is at the threshold of sensitivity of continuous GPS measurements. Different vertical rates will change the horizontal strain rate almost proportionally.     

Stress Measurement by Overcoring at Shallow Depths in a Rock Slope: the Scattering of Input Data and Results

This paper describes a field experiment of stress measurement using the overcoring method performed in a rock slope, called Rochers de Valabres (located in France’s Southern Alps Region), a field laboratory site prone to rockfalls. Six measurements were conducted at shallow depths from the surface, moving deeper along a sub-horizontal borehole. The experiment was conducted in heterogeneous and anisotropic gneiss, with the overcored rock elastic properties, as evaluated by biaxial and uniaxial tests, being widely scattered. Since stress calculations are sensitive to all input data uncertainties, strain inversion was, thus, performed using an experimental device and Monte Carlo simulations. The experimental device allows the assessment of rather broad confidence intervals for both stress magnitude and orientation. The results indicate that the stress state in the surface area is quite heterogeneous and may be correlated with topography. The measurements show a nonlinear stress distribution with distance to the free surface, along with high values of principal stresses, despite the vicinity of the surface. Although influenced by local topography, orientations of the principal computed stresses are characterized by a high turnover due to local heterogeneities. The results are roughly in accordance to a 2D finite element model of the site.     

应用地震学方法研究中国大陆活动地块应力应变场

在中国大陆活动地块假说及活动边界研究的基础上，将中国大陆按照地震活动特征进行分区. 利用大地震的震源机制资料和历史强震资料，结合小震综合节面解，研究了各地震区的应力应变状态，给出了各地震区的平均应力主轴方向和平均应变率. 应用地震应变能积累释放模型研究了各地震区的地震活动水平. 结果表明最大剪切应变率与地震活动水平存在线性关系. 将地震资料给出的中国大陆地壳应力应变场与GPS测量给出的结果进行了比较，初步说明了两种结果存在着统一性，从而显示出活动地块运动变形与强震活动的内在联系.     

反倾层状边坡弯曲折断的应力及挠度判据

以地质分析为基础 ,将反倾层状边坡的任意岩层概化为受复合作用力的板梁模型 ,通过简单的力学解析 ,开展了反倾层状岩石边坡弯曲折断判据的研究。依据岩层折断时和相临岩层的瞬时关系 ,将岩层下部视为瞬时临空状态 ,考虑岩层自重荷载和上部岩层附加荷载 (上部岩层重力荷载、层间摩擦力 )的共同作用 ,基于最大拉应力准则 ,提出了岩层弯曲折断的应力判据 ;依据应力判据 ,得到了岩层弯曲折断的挠度判据 ;利用应力判据及挠度判据 ,可实现反倾层状边坡弯曲折断的现场判定及其控制设计     

UDEC软件对矿山采空区崩塌过程进行应力分布的研究

为了研究矿山采空区坡体的应力(裂隙)分布情况,并对崩塌过程分析进行检验,本文采用离散元数值软件(UDEC)对纳雍县张家湾镇普洒煤矿采煤过程中覆岩裂隙发生、发展及其变化过程进行模拟。结果表明:随着煤层开采的推进,覆岩裂隙向上发展且密度逐渐增多;由于采空区范围过大时,部分被重新压实,裂隙发育至地表形成开切眼;最后在外力作用下整条裂缝垂直贯通,形成危岩体的发展规律,可为类似的矿山地质灾害防治提供基础依据。     

Prediction Model of Coal Reservoir Pressure and its Implication for the Law of Coal Reservoir Depressurization

The main methods of coalbed methane(CBM) development are drainage and depressurization, and a precise prediction of coal reservoir pressure is thus crucial for the evaluation of reservoir potentials and the formulation of reasonable development plans. This work established a new reservoir pressure prediction model based on the material balance equation(MBE) of coal reservoir, which considers the self-regulating effects of coal reservoirs and the dynamic change of equivalent drainage area(EDA). According to the proposed model, the reservoir pressure can be predicted based on reservoir condition data and the actual production data of a single well. Compared with traditional reservoir pressure prediction models which regard EDA as a fixed value, the proposed model can better predict the average pressure of reservoirs. Moreover, orthogonal experiments were designed to evaluate the sensitivity of reservoir parameters on the reservoir pressure prediction results of this proposed model. The results show that the saturation of irreducible water is the most sensitive parameter, followed by Langmuir volume and reservoir porosity, and Langmuir pressure is the least sensitive parameter. In addition, the pressure drop of reservoirs is negatively correlated with the saturation of irreducible water and the Langmuir volume, while it is positively correlated with porosity. This work analyzed the reservoir pressure drop characteristics of the CBM wells in the Shizhuangnan Block of the Qinshui Basin, and the results show that the CBM reservoir depressurization can be divided into three types, i.e., rapidly drop type, medium-term stability type, and slowly drop type. The drainage features of wells were reasonably interpreted based on the comprehensive analysis of the reservoir depressurization type; the latter was coupled to the corresponding permeability dynamic change characteristics, eventually proving the applicability of the proposed model.     

张北地震序列波谱分析

采用石家庄遥测台网数字化的地震记录,选取了1998年1月～1999年12月张北震区的146条地震,分别对P波、S波作了波谱分析,求取了拐角频率、地震矩、震源半径、应力降、平均位错和波谱能量。分析了拐角频率和应力降随时间的变化趋势,并讨论了震源参数相互之间的关系。结果表明,在1999年3月11日5．6级地震之前应力降和拐角频率均出现异常,同时发现,S波对环境的变化比P波敏感,P波较稳定,且各震源参数与震级有一定相关。     

海冰弯曲强度的研究

简要介绍了国内外海冰弯曲强度研究概况;给出了1990年冬作者在辽东湾西部的实验结果;并且讨论了海冰弯曲强度与应力率的关系。     

Elastic response of catamaran wetdeck to liquid impact

The impact of an elastic plate onto the compressible fluid without free surface deformation is considered. The ability of the liquid volume to be deformed is geometrically limited which leads to severe impact conditions. The present analysis is focused on the stresses in the plate and the hydrodynamic loads under the impact. The motivation for this research comes from ship hydrodynamics, where the hulls of a catamaran restrict the liquid outflow and the water impacts onto the wetdeck. The influence of the air on the impact process is investigated. The analysis did not reveal any great advantage of utilizing the air-cushion effect or ejection of air into the water near the impact region to prevent high stresses in the elastic plate. It was found that in the problem considered, the stress peaks far from the plate centre and the one-mode approximation does not provide correct information about the stress level.