影响反射波法桩基检测效果的几个问题

本文着重从反射波法小应变桩基检测过程中对最终测试结果影响较大的几个方面进行分析。介绍了在应力波反射波测桩过程中,影响检测效果的几种因素与改进措施。     

1998年1月10日张北-尚义6.2级地震前昌平地震台应变资料的异常变化分析

分析了昌平地震台体应变、线应变及差应变等观测资料在１９９８年１月１０日张北－尚义６．２级地震前的异常变化。结果表明：该次地震前昌平台的应变观测资料出现了明显的趋势异常;体应变的异常时间与震级有较发的相关性;差应变资料显示了短临异常;由线应变资料计算的主应变方向在地震前逐渐向震中偏转;Ｍ２波潮汐因子也出现了明显的异常变化。     

单轴压缩下大理岩的Q值与频率关系的研究

实验采用单轴压缩循环加载方式,在地震频段内测量了莱阳大理岩的品质因数Q值.在频率为0.1-10 Hz范围内,Q值随频率变化是非线性的,而且在5 Hz附近出现峰值.用正弦波和用三角波两种方式加载所获得的Q值与频率关系很相似,并且三角波加载所测得的Q值普遍高于用正弦波加载测得的Q值.疲劳试验结果表明,正弦波循环加载大大降低了岩石的强度,三角波则对岩石强度降低较少.     

地震的应变张量观测与应用前景

地震发生时的动态应变场,在研究地震触发、地震破裂、地面破坏、水文和岩浆变化等方面都具有重要应用意义.地震的应变张量观测和现有的惯性地震仪观测的物理量不同.前者可以直接记录到地震发生时震源辐射的应变(应力)波,而后者记录到的是位移、速度或加速度.地震频率的应变测量在地震学中的应用前景主要表现在:①测量震源机制解理论预言的辐射4象限分布;②测量库仑应力变化;③换算成动态应力以评估地震烈度;④测量地震波的能量密度;⑤测量地震断层形变加速和形变局部化过程.用惯性地震仪的记录虽然在理论上也可以解算出动态应变值,然而种种原因导致计算结果的误差很大,往往不可接受.应变张量地震仪若能与现有的惯性地震仪配套起来,形成大规模台阵,则有可能推动应变地震学的诞生,在地震观测和地震学科领域引起重大革新.     

TIN DEM线性内插不确定性的随机过程模型

基于随机过程模型导出了TIN DEM线性内插的随机过程模型,给出了不规则随机空间三角形的不确定性描述,讨论了TIN节点误差在线性内插中的传播问题。通过理论推导和实际算例,得到了TIN DEM线性内插点的点位方差和误差椭球半轴的解析表达式、线性内插精度最高点坐标的解析表达式,该结论与三角形的形状无关;对DEM线性外推导致精度急剧下降的必然性结论进行了理论证明;得到TIN线性内插的平均点位方差解析式,从理论上说明了本文结论的有效性。     

Analysis of Anomalous Characteristics of Regional Crustal Deformation before the September 16th, 2019 Zhangye MS5.0 Earthquake, Gansu, China

To study the crustal movement in the vicinity of the epicenter before the Zhangye M_S5.0 earthquake in 2019, the characteristics of crustal deformation before the earthquake are discussed through the GPS velocity field analysis based on the CMONOC data observed from GPS. The baseline time series between two continuous GPS stations and the strain time series of an area among several stations are analyzed in the epicenter area. The resulting time series of baseline azimuth around the epicenter reflects that the energy of the fault in the northern margin of Qilian Mountain is accumulated continuously before 2017. Besides, the movement trend of azimuth slows down after 2017, indicating the stress accumulation on both sides of the seismogenic fault zone has reached a certain degree. The first shear strain and EW-direction linear strain in the epicentral area of the Zhangye M_S5.0 earthquake remain steady after 2017, and the surface strain rate decreases gradually after 2016. It is illustrated that there is an obvious deformation loss at the epicentral region three years before the earthquake, indicating that a certain degree of strain energy is accumulated in this area before the earthquake.     

GPS应变率场计算方法研究进展

基于大地测量资料获取地壳运动与应变积累定量结果一直是国内外重视的地震中长期预测的技术途径。 针对地震变形过程的准确描述问题, 国内外学者基于GPS资料, 发展了多种应变率场解算方法。 本文首先简要介绍了GPS应变率计算的基本原理, 然后系统梳理了国内外多种计算方法的优势和不足, 结果表明: 应变率计算的数学方法只考虑几何关系, 其中整体方法主要适合数据密度和分布较好条件下获取区域地壳变形分布与趋势, 局部方法主要适用于数据较为稀疏情况下描述构造块体的变形特征; 应变率计算的物理方法既考虑几何关系又考虑物理关系, 其中, 位错方法根据主要适合于研究区域存在主控断层的情况(研究区域的变形主要由少数断层控制); 数值模拟方法(如有限元法)主要适用于区域地质、 地球物理的资料比较完备的情况。     

A Review of the Calculation Formula for the Four-component Borehole Strainmeter and Application to Earthquake Cases

Based on the principle formula for the four-component strainmeters, we can directly obtain the specific plane strain, shear strain and azimuthal angle of the principal strain, and the maximum and minimum principal strains calculated afterwards are the indirect result. The problems of practicality of the sensitivity coefficients A and B of plane strain and shear strain are then discussed. Based on this idea, we analyzed the observation data of several four-component borehole strainmeters near the epicenter of the Yiliang M_S5.7 earthquake in 2012 and the Ludian M_S6.5 earthquake in 2014 in the Zhaotong area, Yunnan Province. The results show that the analysis based on the perspective of plane strain and shear strain has an obviously better effect than that based on the component readings, and can directly peel off the respective abnormality of the plane strain and shear strain. In addition, the correlation coefficient curves between measured data of two plane strains show significant anomalies which often occur several days before and during the earthquake.     

2011年日本东北大地震（M_W=9.0）震间与震前变形场特征及其对强震预测的启示

强震震前(preseismic)动力学过程的研究对于地震预测具有十分重要的意义,但由于观测资料的限制,目前对强震前孕震区力学状态及其演化过程的认识还非常有限.2011年日本东北9.0特大地震(Tohoku-Oki)发生在GPS观测台站最为密集的地区,为研究特大地震震间(interseismic)与震前的变形状态提供了难得的机会.文中将利用日本东北大地震之前连续的GPS观测资料,分别计算震间与震前的速度场与变形场.通过对比分析发现,日本东北地区(Tohoku)震前的应变状态与震间的有很大的不同,震间的变形主要受到太平洋板块向日本海沟北西西向的俯冲挤压作用所控制,其主压应变以近东西向压缩为主,日本东北地区的运动方向与太平洋板块的运动方向大体一致.但是,临近地震前(震前)日本东北地区的运动方向发生了很大变化,震前30天的连续GPS观测结果显示,速度场的优势方向经常变换,间歇性地出现与太平洋板块运动方向相反的情况.这意味着震前孕震区的力学状态发生了很大的改变.这种变化可能与震前破裂成核或慢滑移及慢地震等过程有关,这些过程将加速或促进大地震的发生,从而为大地震的发生准备了力学条件.值得特别强调的是,这些现象都是可以通过直接观测能够发现的大地震之前的异常现象.由此可见,加密GPS站点进行连续观测,寻找震前变形异常区以及探索异常的物理机制对于地震预测预报有重要的科学意义.     

Examining fault architecture and strain distribution using geospatial and geomechanical modelling: An example from the Qaidam basin,NE Tibet

The investigation of complex geological setting is still dominated by traditional geo-data collection and analytical techniques, e.g., stratigraphic logging, dip data measurements, structural ground mapping, seismic interpretation, balance section restoration, forward modelling, etc. Despite the advantages of improving our understanding in structural geometry and fault architecture, the geospatial modelling, applying computer-aided three-dimensional geometric design, visualization and interpretation, has rarely been applied to such complex geological setting. This study used the Lenghu fold-and-thrust belt (in Qaidam basin, NE Tibetan Plateau) to demonstrate that the application of geospatial and geomechanical modelling could improve our understanding and provide an effective technique for investigating the fault architecture and strain distribution. The three-dimensional configuration of the Lenghu fold-and-thrust belt was initially derived from traditional analysis techniques, such as regional stratigraphic logging, cross section construction, meso-scale ground mapping and landsat image interpretation. The high-resolution field data and landsat image were integrated to construct the geospatial model, which was subsequently used to quantitatively investigate the fault throw changes along the Lenghu thrust fault zone and to understand its control on the lateral structural variation. The geospatial model was then restored in three dimensions to reveal the kinematic evolution of the Lenghu fold-and-thrust belt. Geomechanical modelling, using a Mass-Spring algorithm, provided an effective three-dimensional tool for structural strain analysis, which was used to predict the strain distribution throughout the overall structure, e.g., normal faults with throws ranging from meters to tens of meters in the hanging-wall. The strain distribution predicted by geomechanical modelling was then validated by the natural normal faults in the hanging-wall. The high accordance between the strain prediction and statistics of natural normal faults demonstrates good applicability of geospatial and geomechanical modelling in the complex geological setting of the Lenghu fold-and-thrust belt. The geospatial models and geomechanical models, therefore, can provide a robust technique for analyzing and interpreting multi-source data within a three-dimensional environment. We anticipate that the application of three-dimensional geospatial modelling and geomechanical modelling, integrating both multi-source geologic data and three-dimensional analytical techniques, can provide an effective workflow for investigating the fault architecture and strain distribution at different scales (e.g., ranging from regional-to meso-scale).