淮河大堤老应段土体蠕变特性研究及工程应用

本文依据工程需要, 采取淮河大堤老应段的原状和扰动土样, 在室内对堤体及堤基土的剪切蠕变和拉伸蠕变特性进行了试验研究。粘土的蠕变剪切强度远低于瞬时剪切强度, Ｃ值仅是Ｃ值的４０％左右;相同含水条件下粘土的长时抗拉强度大于瞬时抗拉强度, 长时拉伸应变量远大于瞬时拉伸应变量, 约为２倍。     

虾拉沱准直测量与断层活动

对虾拉准直观测资料进行了处理分析，探讨了准直测量的精度，测定的断层蠕变特性征及震 反向运动 ，分析了准直观测的效果，并提出改进措施。     

鲜水河断裂带跨断层形变测量及其地震学意义

通过对鲜水河断裂带多年跨断层形变测量资料的分析，揭示出鲜水河断裂带不同部位的形变特征，断裂带破裂区表现为较高速率的蠕滑运动，其运动速率又以极震区为中心向两侧衰减，“闭锁区”则具有运动停滞的特点，并有明显的分段性。断层形变的特殊形态还与地震有一定的关系，如每当形变出现“Ｖ”（或倒“Ｖ”）字型时，会有中小地震对应；断层扭动反向与变化也与地震有关     

粘弹性体力学模型的判别准则及在岩石试验中的应用

从粘弹性介质的蠕变柔量出发，推导出粘弹性体力学模型的判别准则。并通过单轴压缩条件下４种岩石的蠕变试验，讨论了判别准则实用化中的两个问题，解的存在条件问题，多解性及解的唯一性问题。     

广义地应力及其强度理论

根据岩体力学位移理论，将广义地应力理论与岩体介质蠕变柔量理论相结合，建立了广义地应力的强度理论，并讨论了它在岩体工程中的应用。     

Weathering damage evaluation of rock properties in the Bunhwangsa temple stone pagoda,Gyeongju, Republic of Korea

The stone pagoda of the Bunhwangsa temple in Republic of Korea was made of piling small brick-shaped stones. The majority of stone bricks are andesitic rocks with variable geneses. Rock properties of the pagoda roof suffer partial significant deterioration, such as multiple peel-offs, exfoliation, onion-peel-like decomposition, cracks forming round lines and falling-off stone pieces. The stylobates and tabernacles at the four corners are composed of granitic rocks, which are heavily contaminated by lichens and mosses. Some of these contamination marks show dark black or yellowish brown colors by inorganic secondary hydrates. The four tabernacles and northern face of the pagoda body have been exposed to relatively high humidity, which causes light gray efflorescence as stalactites between the northern and western sides of the body. The efflorescences are composed of calcite, gypsum and clay minerals. The stone lion statues at the southeast and northeast corners are made of alkali granite, while the others are lithic tuff. Total rock properties of the pagoda consist of 9,708 stone bricks. Among them, 11.0% are fractured, 6.7% are fallen off, and 7.0% show considerable surface efflorescence, which shows that the pagoda has been highly deteriorated by physical, chemical and biological weathering. The authors strongly suggest long-term monitoring and comprehensive conservation researches.     

Shear-enhanced compaction during non-linear viscous creep of porous calcite-quartz aggregates

In this paper, we extend the previous studies of semi-brittle flow of synthetic calcite-quartz aggregates to a range of temperatures and effective pressures where viscous creep occurs. Triaxial deformation experiments were performed on hot-pressed calcite-quartz aggregates containing 10, 20 and 30 wt% quartz at confining pressure of 300 MPa, pore pressures of 50-290 MPa, temperatures of 673-1073 K and strain rates of 3.0×10⁻⁵/s, 8.3×10⁻⁵/s and 3.0×10⁻⁴/s. Starting porosity varied from 5 to 9%. We made axial and volumetric strain measurements during the mechanical tests. Pore volume change was measured by monitoring the volume of pore fluid that flows out of or into the specimen at constant pore pressure. Yield stress increased with decreasing porosity and showed a dependence on effective pressure. Thus, the yield stress versus effective pressure can be described as a yield surface with negative slope that expands with decreasing porosity and increasing strain hardening, gradually approaching the envelope of strength at 10% strain, which has a positive slope. Creep of porous rock can be modeled to first order as an isolated equivalent void in an incompressible nonlinear viscous matrix. An incremental method is used to calculate the stress-strain curve of the porous material under a constant external strain rate. The numerical simulations reproduce general trends of the deformation behavior of the porous rock, such as the yield stress decreasing with increasing effective pressure and significant strain hardening at high effective pressure. The drop of yield stress with increasing porosity is modeled well, and so is the volumetric strain rate, which increases with increasing porosity.     

弹性波CT技术在码头加固效果检测中的应用

青岛港是我国北方一个很重要的港口码头,但由于年久失修,码头的使用出现安全隐患。经多种修补方案比较,最终采用垂直注浆加固方案。为了检测码头高压注浆加固处理效果,采用弹性波CT方法并结合岩芯波速测试及强度试验对其进行检测。本文简要叙述了弹性波CT法的原理与测试方法,探讨了该法在灌浆效果检测中的应用。试验证实,弹性波CT技术在探测水下高压注浆效果检测方面有其独特的效果。