Hybrid testing with model updating on steel panel damper substructures using a multi-axial testing system

This paper describes a series of hybrid tests performed on a steel panel damper (SPD) specimen by using a multi-axial testing system. The building under investigation adopted a three-dimensional six-story moment resisting frame with four SPDs installed at each story as the main seismic resisting system. The structural model was subjected to bi-directional ground excitations of three hazard levels. The finite element analysis program “Platform of Inelastic Structural Analysis for 3D Systems” (PISA3D) was used as the analysis kernel for hybrid tests. Relevant programming extensions in PISA3D were created to support geographically distributed hybrid testing in a general-purpose manner. An external displacement control (EDC) method was developed such that the actual boundary deformation of the specimen fixtures could be continuously measured and immediately compensated during tests. An online model updating (OMU) technique was developed and employed such that the material properties of the specimen could be identified directly from the specimen response during the test. The identified material properties were then immediately used to update those of the other relevant numerical elements to enhance the overall simulation fidelity. Superior flexibility of the underlying software architecture was well demonstrated in this series of hybrid tests since no hardcoding was used to support all the complex test settings. Test results confirmed the effectiveness of the proposed EDC method, as well as the capacity of the proposed OMU technique to satisfactorily and efficiently capture the hysteretic properties of the specimen.     

设计变截面交叉柔性力学的模型在装配式钢构建筑梁柱预应力中的分析

为了提高装配式钢构建筑梁柱的抗震性能,设计一种变截面交叉柔性力学模型进行截面抗震性的预应力评估。方法中采用极限承载力约束进行抗震性分析,引入抗弯刚度软化系数进行误差修正,求出钢构建筑梁柱的荷载作用力矩,通过应力评估和结构解耦性设计,实现钢构建筑梁柱的抗震性评估。构建以钢材强度、延性指标和钢框架地震易损特征为约束参量的抗震性能分析函数,建立装配式钢构建筑梁柱开裂初始预应力预测方法,实现装配式钢构建筑梁柱预应力的准确评估。试验结果表明,所提模型能够对装配式钢构建筑梁柱的应力应变关系、屈服强度以及极限承载力进行准确计算,提高配式钢构建筑梁柱的抗震性能。     

海上钢结构防腐蚀措施的研究

针对海上钢结构严重腐蚀环境,分析了影响其腐蚀的主要因素,比较分析了钢结构常用的几种腐蚀防护方法。由于电弧喷涂复合涂层具有20 a以上的长效防腐寿命和涂层结合强度高、免维护等特点,因而成为海上钢结构防腐蚀的优选技术方案。还列举了国内外钢结构热喷涂防腐措施的应用实例及相关标准,对加强海上钢结构长效防腐的立法和推广应用提出了看法。     

温度变化对深基坑钢管支撑温度效应影响分析

在基坑围护工程中,大量使用内支撑结构体系,在支撑体系中采用最多的是钢管支撑,因为其属于金属材料,温度变化对支撑结构的影响不容忽视。基于弹性热力学基本原理推导出空心圆筒热应力公式,同时考虑了围护墙的侧向水平位移,定量分析变温对基坑钢管支撑轴力影响,实测轴力值及数值解验证了计算公式的正确性。结果表明:解析解大于数值解,且解析解大于实测值,偏于保守,但差值不大可作为设计安全储备,便于工程师在今后设计过程中作为参考实例。     

型钢混凝土剪力墙轴压比计算及其限值研究

型钢混凝土剪力墙构件具有良好的抗震性能,已在高层和超高层建筑中得以广泛应用。然而我国规范中,对这种结构的轴压比计算方法及限值问题没有给出针对性的条文,在工程实践中,设计人员只能套用普通混凝土剪力墙的相关规定,限制了这种新型结构的推广。本文通过ANSYS程序分析了若干在轴向压力作用下的型钢混凝土剪力墙构件,得到了墙底截面处型钢与混凝土的应力分布情况,从而推导出型钢混凝土剪力墙构件的轴压比计算公式;另外,通过构件低周反复加载试验与计算机数值仿真技术相结合的方法,分析了型钢混凝土剪力墙构件的轴压比限值问题,并提出了设计建议。     

ICP-AES同时测定不锈钢中的Cr,Ni,Ti

研究了ICP -AES同时测定耐酸不锈钢合金中Cr,Ni,Ti的条件 ,并对样品的溶解方法 ,共存元素间的光谱干扰及其消除等进行了研究。建立的分析方法简便快速 ,有较好的精密度和准确度     

钢筋混凝土框架顶部钢结构加层的抗震性能分析

采用钢结构加层后,结构的整体质量、刚度、周期、阻尼比等都发生较大的变化。仅对加层部分结构进行计算分析是不安全的,应进行结构的整体分析。本文采用有限元软件ANSYS,对某4层钢筋混凝土框架结构办公楼顶部加2层纯钢框架的抗震性能进行分析,并在此基础上讨论了不同加层层数的整体框架模型、不同阻尼比ζ和有侧移及无侧移框架形式对结构整体抗震性能的影响分析。计算表明,由于加层后结构周期加长,整体框架的底层层剪力变化较小。     

关于钢结构抗震存在的问题及建议

本文探讨了目前钢结构抗震设计中存在的两个主要问题:其一是钢结构的地震作用,由于多高层钢结构房屋被列入“建筑抗震设计规范”(GB50011-2001)中时没有考虑钢结构延性好和弹性阶段阻尼比较小的特点,使得钢结构地震作用偏大,用钢量偏高;其二是钢结构承载力抗震调整系数对梁和焊缝的规定与焊缝强度高于母材强度的实际情况不符,造成设计困难。本文对现行抗震规范、“建筑工程抗震性态设计通则”和美国UBC规范的地震作用进行了分析比较,提出按照耗能能力将钢结构体系分为四类,在此基础上引入结构体系调整系数,对每类结构的地震作用取值给出建议。针对梁柱刚性连接,从抗震设计原则出发,对7、8和9度区分别建议了适合采用的连接形式,并给出了小震和大震下的设计验算公式。     

Monte-Carlo Simulation of Surface Crack Growth Rate for Offshore Structural Steel E36 Z35

—The Monte-Carlo method is used to simulate the surface fatigue crack growth rate foroffshore structural steel E36-Z35,and to determine the distributions and relevance of the parameters in theParis equation.By this method,the time and cost of fatigue crack propagation testing can be reduced.Theapplication of the method is demonstrated by use of four sets of fatigue crack propagation data foroffshore structural steel E36-Z35.A comparison of the test data with the theoretical prediction for surfacecrack growth rate shows the application of the simulation method to the fatigue crack propagation tests issuccessful.     

卵砾石层的钢管桩施工工艺研究

卵砾石地层属钻探复杂地层，也是基础工程施工的主要地层。目前，国内外卵砾石地层的钻进方法存在局限性大、效率低、成本高、工艺复杂、易出现孔内事故等缺点。钢管桩的应用日趋广泛。卵砾石层中有效的施工工艺亟待解决。在理论研究与实践的基础上，提出高效的钢管静压冲击钻进工艺，并在实践中取得了良好的效果