Investigation into the effect of fault properties on wave transmission

The estimation of wave transmission across the fractured rock masses is of great importance for rock engineers to assess the stability of rock slopes in open pit mines. Presence of fault, as a major discontinuity, in the jointed rock mass can significantly impact on the peak particle velocity and transmission of blast waves, particularly where a fault contains a thick infilling with weak mechanical properties. This paper aims to study the effect of fault properties on transmission of blasting waves using the distinct element method. First, a validation study was carried out on the wave transmission across a single joint and different rock mediums through undertaking a comparative study against analytical models. Then, the transmission of blast wave across a fault with thick infilling in the Golgohar iron mine, Iran, was numerically studied, and the results were compared with the field measurements. The blast wave was numerically simulated using a hybrid finite element and finite difference code which then the outcome was used as the input for the distinct element method analysis. The measured uplift of hanging wall, as a result of wave transmission across the fault, in the numerical model agrees well with the recorded field measurement. Finally, the validated numerical model was used to study the effect of fault properties on wave transmission. It was found that the fault inclination angle is the most effective parameter on the peak particle velocity and uplift. Copyright © 2017 John Wiley & Sons, Ltd.     

Liquefaction potential evaluations by energy-based method and stress-based method for various ground motions

An energy-based liquefaction potential evaluation method (EBM) previously developed was applied to a uniform sand model shaken by seismic motions recorded at different sites during different magnitude earthquakes. It was also applied to actual liquefaction case histories in Urayasu city during the 2011 M9.0 Tohoku earthquake and in Tanno-cho during the 2003 M8.0 Tokachi-oki earthquake. In all these evaluations, the results were compared with those by the currently used stress-based method (SBM) under exactly the same seismic and geotechnical conditions. It was found that EBM yields similar results with SBM for several ground motions of recent earthquakes but has easier applicability without considering associated parameters. In Urayasu city, the two methods yielded nearly consistent results by using an appropriate coefficient in SBM for the M9.0 earthquake, though both overestimated the actual liquefaction performance, probably because effects of plasticity and aging on in situ liquefaction strength were not taken into account. In Tanno-cho, EBM could evaluate actual liquefaction performance due to a small-acceleration motion during a far-field large magnitude earthquake while SBM could not.     

厚碳酸盐岩覆盖区RVSP三维地震勘探应用效果分析

该文以中国南方一厚碳酸盐岩覆盖区的RVSP三维地震勘探实例,对RVSP三维地震勘探观测系统和数据采集参数的确定、地面等效处理和波场分离等关键处理技术及地质效果进行了阐述和分析,说明了RVSP在克服表浅层复杂地质条件及环境条件对资料的影响及提高地震资料的分辨率有其特定的优势,同时也提出了RVSP三维地震在采集和处理过程中的难点。     

Modeling nonlinear wave–wave interactions with the elliptic mild slope equation

An approach is developed to simulate wave–wave interactions using nonlinear elliptic mild-slope equation in domains where wave reflection, refraction, diffraction and breaking effects must also be considered. This involves the construction of an efficient solution procedure including effective boundary treatment, modification of the nonlinear equation to resolve convergence issues, and validation of the overall approach. For solving the second-order boundary-value problem, the Alternating Direction Implicit (ADI) scheme is employed, and the use of approximate boundary conditions is supplemented, for improved accuracy, with internal wave generation method and dissipative sponge layers. The performance of the nonlinear model is investigated for a range of practical wave conditions involving reflection, diffraction and shoaling in the presence of nonlinear wave–wave interactions. In addition, the transformation of a wave spectrum due to nonlinear shoaling and breaking, and nonlinear resonance inside a rectangular harbor are simulated. Numerical calculations are compared with the results from other relevant nonlinear models and experimental data available in literature. Results show that the approach developed here performs reasonably well, and has thus improved the applicability of this class of wave transformation models.     

Efficient DEM‐based overland flow routing using integrated recursive algorithms

Two primary concerns in performing watershed overland flow routing are the numerical instability and computational efficiency. The stability of executing an explicit scheme has to be maintained by observing the Courant–Friedrich–Lewy criterion, which is adopted to confirm that the numerical marching speed is larger than the wave celerity. Moreover, there is another criterion of time step devised in previous studies to avoid back‐and‐forth refluxing between adjacent grids. The situation of refluxing usually occurs on flat regions. In light of this, the selection of a small time increment to honor both restrictions simultaneously is believed to decrease the computational efficiency in performing overland flow routing. This study aims at creating a robust algorithm to relax both restrictions. The proposed algorithm was first implemented on a one‐dimensional overland plane to evaluate the accuracy of the numerical result by comparing it with an analytical solution. Then, the algorithm was further applied to a watershed for 2D runoff simulations. The results show that the proposed integrated algorithm can provide an accurate runoff simulation and achieve satisfactory performance in terms of computational speed.     

Application of the numerical manifold method for stress wave propagation across rock masses

In this paper, the numerical manifold method (NMM) is extended to study wave propagation across rock masses. First, improvements to the system equations, contact treatment, and boundary conditions of the NMM are performed, where new system equations are derived based on the Newmark assumption of the space–time relationship, the edge‐to‐edge contact treatment is further developed for the NMM to handle stress wave propagation across discontinuities, and the viscous non‐reflection boundary condition is derived based on the energy minimisation principle. After the modification, numerical comparisons between the original and improved NMM are presented. The results show that the original system equations result in artificial numerical damping, which can be overcome by the Newmark system equations. Meanwhile, the original contact scheme suffers some calculation problems when modelling stress wave propagation across a discontinuity, which can be solved by the proposed edge‐to‐edge contact scheme. Subsequently, the influence of the mesh size and time step on the improved NMM for stress wave propagation is studied. Finally, 2D wave propagation is modelled, and the model's results are in good agreement with the analytical solution. Copyright © 2013 John Wiley & Sons, Ltd.     

The behavior of magneto-acoustic-gravity waves near the cusp resonance in a lossless,compressible, isothermal,stratified, electrically conducting and uniformly magnetized atmosphere. II: The valve effect

Abstract

In the present paper the behavior of (internal) magneto-acoustic-gravity waves near the cusp resonance in a lossless, compressible, isothermal, stratified, electrically conducting atmosphere that is permeated by a uniform, nearly horizontal magnetic field is re-addressed (Kamp, 1989). The previously analyzed linear conversion of long acoustic-gravity waves into short magneto-acoustic waves that carry off the energy from the resonance region along the magnetic field, is re-analyzed with boundary layer techniques that are based on the smallness of the vertical component of the magnetic field. More specifically the existence of the so-called valve effect for the generated magneto-acoustic mode near the critical level is explicitly demonstrated and shown to be governed by two rivalling effects.     

基于LLS的雷电流波头时间分布特征

利用湖北省2007—2013年雷电定位系统(Lightning Location System,LLS)监测的雷电流相关参数资料,采用数理统计方法,对雷电流波头时间的年、季、月、日变化以及累积概率和概率密度分布进行了统计分析。结果表明,正闪电平均波头时间为4.8μs,负闪和总闪电为3.6μs;一年中,正闪电7月波头时间最短,月变化特征大致呈"V"形;负闪和总闪电5—7月波头时间比其他月份短,月变化特征大致呈"U"形。正闪电波头时间季节、日变化明显,负闪和总闪电季节、日变化不明显。波头时间小于等于10μs时,正闪、负闪和总闪电的波头时间累积概率分别为95.5%、99.7%和99.6%,总闪电95%的波头时间大于1.5μs,50%的大于3.1μs,5%的大于6.0μs。波头时间在2~3μs时,正闪、负闪和总闪电的概率密度最大。气温较低月份,波头时间相对较长,反之,波头时间相对较短,其原因可能与雷电流幅值大小有关,具体原因有待进一步研究。     

强厄尔尼诺事件下2016年1月中国南方超级寒潮的动力学机制:瞬变波对大气长波异常的调制

本文采用Plumb三维波活动通量和局地Eliassen-Palm通量诊断方法,利用欧洲中期天气预报中心的逐日再分析资料ERA-Interim,分析了超强厄尔尼诺背景下2016年1月下旬中国南方超级寒潮的动力学机制：瞬变波对大气长波异常的调制。前期2015年12月的北大西洋海表热通量正异常,有助于后期大西洋阻塞形势的维持。大气长波能量沿大圆路径从大西洋阻高经乌拉尔地区向东亚中低纬度传播并在此辐合,导致了乌拉尔阻高和华北横槽的经向结构,更多强冷空气聚集在异常偏南的纬向槽线附近。寒潮爆发前夕,2支瞬变波列活跃在亚欧大陆。北支瞬变波列调制了北方的大气长波,使横槽转竖;南支瞬变波列协同调控了南方的大气长波,使南支印缅槽减弱;两者共同作用,促使冷平流大举南下,直达华南沿海,南方寒潮发生。