Control of syntectonic erosion and sedimentation on kinematic evolution of a multidecollement fold and thrust zone: Analogue modeling of folding in the southern subandean of Bolivia

Several analogue modeling studies have been conducted during the past fifteen years with the aim to discuss the effects of sedimentation and erosion on Foreland Fold and Thrust Belt, among which a few have analyzed these processes at kilometric scale (Malavieille et al., 1993; Nalpas et al., 1999; Barrier et al., 2002; Pichot and Nalpas, 2009). The influence of syn-deformation sedimentation and erosion on the structural evolution of FFTB has been clearly demonstrated. Here, we propose to go further in this approach by the study of a more complex system with a double decollement level. The natural study case is the Bolivian sub-Andean thrust and fold belt, which present all the required criteria, such as the double decollement level. A set of analogue models performed under a CT-scan have been used to test the influence of several parameters on a fold and thrust belt system, among which: (i) the spatial variation of the sediment input, (ii) the spatial variation of the erosion rate, (iii) the relative distribution of sedimentation between foreland and hinterland. These experiments led to the following observations:

• 1. The upper decollement level acts as a decoupling level in case of increased sedimentation rate: it results in the verticalization of the shallower part (above the upper decollement level), while the deeper parts are not impacted.
• 2. Similarly, the increase of the erosion rate involves the uplift of the deeper part (below the upper decollement level), whereas the shallower parts are not impacted.
• 3. A high sedimentation rate in the foreland involves a fault and fold vergence reversal, followed by a back-thrusting of the shallower part.
• 4. A high sedimentation rate in the hinterland favours thrust development toward the foreland in the shallower parts.

     

Study of high temperature targets identification and temperature retrieval experimental model in SWIR remote sensing based Landsat8

For surface features in short-wave infrared (SWIR, 1.3–3.0 μm) in remote sensing imagery, pixel values depict the total energy including reflection and emission. For surface features at normal temperature in SWIR band, emission energy can be ignored. While for surface features at high temperature in SWIR band, emission energy is equal to or even higher than the reflection energy. So remote sensing imagery of SWIR band can be used to separate emission and reflection energy as well as to realize temperature retrieval of high temperature targets. In this study, the seventh band (SWIR band) of Landsat8 OLI remote sensing imagery is used to perform the theoretical model research for temperature retrieval of high temperature targets. In the meantime, it is also used with the corresponding observation experiment of synchronization satellite to check the theoretical model. The result shows that the radiant flux density for mixed pixels with high temperature targets is higher than adjacent pixels without high temperature targets. Thus, the high temperature pixels can be identified in SWIR band. The retrieval results of temperature and fractional area for high temperature targets are consistent with reality. In the study, the result illustrates that it is effective to identify high temperature targets in remote sensing imagery of SWIR band and the model is appropriate for temperature retrieval use.     

太原市地表热环境时空格局分析

针对鲜有资源型城市的地表热环境研究这一情况,该文基于Landsat8遥感数据,反演了太原市在2013—2015年间共3期的地表温度。提出一个考虑空间格局结构的城市热岛效应指数,在3期数据中,太原市区整体热岛效应指数分别为9.1%、9.8%和8.9%;同时,根据城市功能和路网结构将太原市区划分为6个分区,从分区级层面量化分析了地表热环境的时空分异特征规律,结果表明,太原市区地表温度整体呈现空间分散化特征,不同分区也呈现出不同的时空格局演变过程;最后,选取40个地表温度实测样本点验证反演精度,最大误差绝对值为1.1℃,最小误差绝对值为0.2℃,均方根误差为0.7℃。     

Landsat 8热红外数据定标参数的变化及其对地表温度反演的影响

Landsat系列卫星上的TIRS热红外传感器数据已被大量应用,针对TIRS数据的地表温度反演也相继开发出一些算法,并有一些研究对TIRS数据的定标及其地表温度反演算法的精度进行了对比。本文主要就TIRS热红外传感器定标参数的变化,结合这些定标参数变化的时间点对有关地表温度反演算法的适用性和有效性进行分析,特别是对劈窗算法是否适合当前的TIRS数据进行了讨论,以使用户能够对Landsat 8 TIRS热红外数据的正确使用有进一步的认识。总的看来,由于视域外杂散光的影响,TIRS数据的定标精度仍达不到设计目标,TIRS第11波段的不确定性仍成倍大于TIRS 10波段。因此,在Landsat团队未彻底解决这一问题之前,同时用TIRS第10、第11这两个差距较大的波段构成的劈窗算法来反演地表温度,其精度存在较大的不确定性,US6-S团队仍在致力于改进第11波段的精度,改进后的波段可以用劈窗策法。目前应以TIRS第10单波段的方式来反演地表温度为宜。     

Quantification of LST and CO2 levels using Landsat-8 thermal bands on urban environment

Land surface temperature (LST) is an important aspect in global to regional change studies, for control of climate change and balancing of high temperature. Urbanization is one of the influencing factors increasing land surface and atmospheric temperature, by the emission of greenhouse gases (e.g. CO₂, NO and methane). In the present study, LST was derived from Landsat-8 of multitemporal data sets to analyse the spatial structure of the urban thermal environment in relation to the urban surface characteristics and land use–land cover (LULC). LST is influenced by the greenhouse gases i.e. CO₂ plays an important role in increasing the earth’s surface temperature. In order to provide the evidence of influence of CO₂ on LST, the relationship between LST, air temperature and CO₂ was analysed. Landsat-8 satellite has two thermal bands, 10 and 11. These bands were used to accurately to calculate the temperature over the study area. Results showed that the strength of correlation between ground monitoring data and satellite data was high. Based on correlation values of each month April (R² = 0.994), May (R² = 0.297) and June (R² = 0.934), observed results show that band 10 was significantly correlating with air temperature. Relationship between LST and CO₂ levels were obtained from linear regression analysis. band 11 was correlating significantly with CO₂ values in each of the months April (R² = 0.217), May (R² = 0.914) and June, (R² = 0.934), because band 11 is closer to the 15-micron band of CO₂. From the results, it was observed that band 10 can be used for calculating air temperature and band 11 can be used for estimation of greenhouse gases.     

皖南晚中生代花岗闪长岩地球化学:成岩成矿制约

皖南地区是铜、钼、金多金属成矿区,成矿与晚中生代花岗闪长岩类关系密切。近十年来,皖南花岗闪长岩的成因仍然存在分歧。本次报道了皖南花岗闪长岩全岩主、微量元素和锆石原位元素数据。皖南花岗闪长岩(Si O2=64.3%~70.8%)为高钾钙碱性、过铝质岩石,具有相似的埃达克岩特征:高Si O2、Sr/Y(17.1)和(La/Yb)N(14.9)比值,低Yb(1.72×10-6)和Y(18.4×10-6)含量。它们也具有较低Al2O3和Cr(3.40×10-6~10.0×10-6)含量、低Mg#(0.34~0.42)和Nb/Ta(9.6~13.3)值,高K2O和Ba(404×10-6)含量,高K2O/Na2O(0.89~1.55)、Th/La(0.27~0.51)和Th/U(2.79~7.49)比值。锆石原位地球化学特征显示其岩浆源区为低温(锆石Ti-in-zircon温度均值674℃)和高氧逸度(lgfO2集中在-21.4~-9.18,均值-16.4;锆石Ce4+/Ce3+平均值276)的陆壳。这些特征说明皖南花岗闪长岩可能起源于较年轻的加厚下地壳的部分熔融,并经历了斜长石、钾长石和铁镁矿物等结晶分异作用。它们可能形成于与古太平洋板块俯冲密切相关的大陆活动边缘弧至弧后拉张构造转换背景。本区大规模Cu、Mo、Au成矿作用与岩浆的高氧逸度密切相关,而锆石Ce4+/Ce3+可作为矿床勘探一个有效的指标。     

天山南麓库车晚新生代褶皱-冲断带

库车褶皱冲断带位于天山南麓,由近东西走向的多条构造带组成。三叠系暗色泥岩、侏罗系煤层、古近系库姆格列木组膏盐层和新近系吉迪克组膏盐层构成库车褶皱冲断带的区域性主滑脱面。褶皱冲断带底面由北向南逐渐抬高。褶皱冲断带主体发育盖层滑脱-冲断构造(薄皮构造),基底卷入型冲断构造(厚皮构造)见于北缘的根带。新生界膏盐层之上构造变形以滑脱褶皱为特色,之下以冲断构造为特色。库车褶皱冲断带是印度-亚洲碰撞远程效应下,(南)天山晚新生代造山过程的产物。褶皱冲断带构造变形的动力来源主要是造山楔向塔里木盆地推进所形成的挤压构造应力。褶皱冲断带构造变形的起始时间为约23Ma,构造变形具有阶段式加速的特点,已经识别出约23Ma、约10Ma、5~2Ma和1~0Ma共4个变形加速期。褶皱冲断带的演化过程为前展式,褶皱冲断带前锋向南推进的同时,后缘持续变形。     

湘南荷花坪锡多金属矿床成矿年代研究

荷花坪锡多金属矿床是本世纪初在南岭中段湘南地区新发现的一个大型矿床,区内的锡多金属矿化产在王仙岭岩体东南内、外接触带,已发现有Ⅰ、Ⅱ、Ⅲ和Ⅳ号4个主要锡多金属矿体。其中,Ⅰ、Ⅱ和Ⅳ号矿体由早期矽卡岩型和晚期蚀变碎裂岩型矿石组成,Ⅲ号矿体则由独立产出的蚀变碎裂岩型矿石组成,且包含有部分碎裂花岗斑岩。以往研究已对Ⅳ号矿体中的矽卡岩型矿石和Ⅲ号矿体中含矿斑岩脉分别采用辉钼矿Re-Os法和锆石SHRIMP U-Pb法进行了测年,获得的年龄分别为224.0±1.9Ma和142±2Ma。本文补充了晚期蚀变碎裂岩型矿石的~(40)Ar/~(39)Ar测年,结果显示,Ⅱ号矿体中蚀变碎裂岩型矿石白云母样品和石英样品的坪年龄分别为151.88±1.58Ma和155.39±7.04Ma;Ⅳ号矿体中蚀变碎裂岩型矿石石英样品的坪年龄为156.94±1.64Ma。结合前人研究资料综合分析,认为荷花坪矿区存在印支晚期(224Ma)、燕山早期(151~156Ma)和燕山晚期(142Ma)三期成矿作用,分别与区内印支期中粗粒含电气石黑云母花岗岩、燕山早期中粗粒黑云母花岗岩和燕山晚期花岗斑岩脉有关,不同期成岩、成矿作用的构造环境均为岩石圈的拉张伸展。湘南地区印支期(205~224Ma)基性岩浆活动及荷花坪矿床印支期成岩、成矿过程中均有幔源物质的参与,它们共同指示南岭地区中生代构造体制的转换或岩石圈伸展减薄可能始于印支主期(230~244Ma)之后的224Ma左右,即晚三叠世。     

南大洋太平洋扇区中尺度涡旋的统计特性及其变化

中尺度涡旋在南大洋海洋动力学中具有重要地位,其对气候变化的响应表现也引起了海洋学家与气候学家的广泛关注。本文利用涡动动能与涡旋自动探测技术两种方法对南大洋太平洋扇区的涡旋特性及其变化进行了分析。与前人结果相一致的是,高值的涡动动能主要集中在南极极锋海区,并且自西向东逐渐减弱。在过去的20年里,涡动动能在太平洋扇区的显著增强也集中在中西部海域,这里也是南极绕极流斜压性较强的海域。涡旋统计特性揭示了涡动动能的空间分布及其年际变化主要归因于涡旋振幅与旋转速度,而并非涡旋个数或者涡旋半径。这些结果进一步确认了对应于南半球环状模正位相的绕极西风异常改变了南大洋的涡旋特性,从而表现出涡旋活跃性增强。     

基于面向对象影像分析方法的我国西沙珊瑚礁地貌单元信息提取

珊瑚礁地貌单元的空间分布对于理解珊瑚礁生态系统的地质构造过程具有重要作用。然而,基于像素的影像分析方法往往获取不到较高精度的分类结果。本文基于面向对象的影像分析方法,利用Landsat 8卫星影像数据对我国西沙地区的珊瑚环礁进行了地貌单元的遥感信息提取。借鉴于美国千年珊瑚礁测绘项目的工作成果,本文首先针对研究区特点定义了十类珊瑚礁地貌单元类型。然后,基于对象的多层次关系特点,并综合利用对象的光谱、形状、上下文关系等特征,建立合适的分类规则集,获取了研究区较大尺度的珊瑚环礁地貌分区图,其分类精度普遍高于80%。虽然研究结果表明基于面向对象的影像分析方法可以有效的进行珊瑚礁遥感信息提取,但其规则集的可移植性仍需要今后的工作加以改善。