云南昭通铅锌矿pH-logfo_2和pH-loga相图对铅锌共生分异的制约

云南昭通大型铅锌矿是滇东北矿集区乃至川滇黔铅锌成矿域铅锌矿床的典型代表。矿床具有明显的矿物组合分带性的特点,区别于典型的MVT型铅锌矿床。根据矿物组合特征构建、计算、绘制了该矿床的p H-logfo2、p Hloga相图,剖析了铅锌矿共生分异的形成机理。研究表明p H、氧逸度、组分浓度的协同作用造成了铅、锌的共生分异,对矿物组合分带起控制作用,且温度下降、氧逸度升高和p H升高有利于金属硫化物的沉淀,成功解释了昭通铅锌矿床独具特色的矿物分带地质特征。     

基于低精度DEM的InSAR相位解缠方法

针对干涉图条纹密集,残差点较多,相位解缠困难甚至出现错误的情况,提出了借助低精度DEM降低条纹率,提高相位解缠精度的办法。采用Envisat ASAR数据验证了提出方法的有效性。     

浙江地区2015年冬季首场降雪的气象特征及双偏振雷达回波特征分析

基于3 h间隔的浙江快速更新同化模式资料、常规探空资料和临安双偏振雷达资料反演产品对浙江地区2015年12月5日的首场降雪过程的特征进行了分析,得到了较高的云顶高度、较低的云顶温度、较低的零度层高度、较低的低层平均温度、稳定的底层冷平流以及特殊的地形是浙西北地区在较高的地表温度情况下易形成降雪的原因;同时对临安双偏振雷达产品资料进行了分析,首次提出浙江地区此类降雪的双偏振雷达产品特征,并得到了判别阈值.希望借助两方面的研究来减少此类降雪天气的漏报率和可预报性.     

P2000型测氡仪在气氡连续观测中记录的潮汐现象

利用宁波地震台ZK03井的原气氡观测系统,将P2000型测氡仪应用于气氡连续观测试验,记录到较明显的潮汐现象且其波动幅度较大。功率谱估计结果显示,观测数据存在显著的固体潮效应。同时,与同井观测的动水位、同台观测的VS垂直摆NS向记录的潮汐波形进行对比,发现曲线变化趋势基本一致,每天都有两峰两谷,但存在约2h的时间差。P2000型测氡仪具有自动扣除本底污染的功能,其记录到的波形能更真实地反应地下流体中气氡浓度的动态变化过程,可应用于地震流体气氡的连续观测。     

Phase equilibria modelling and LASS monazite petrochronology: P–T–t constraints on the evolution of the Priest River core complex,northern Idaho

Phase equilibria modelling, laser‐ablation split‐stream (LASS)‐ICP‐MS petrochronology and garnet trace‐element geochemistry are integrated to constrain the P–T–t history of the footwall of the Priest River metamorphic core complex, northern Idaho. Metapelitic, migmatitic gneisses of the Hauser Lake Gneiss contain the peak assemblage garnet + sillimanite + biotite ± muscovite + plagioclase + K‐feldspar ± rutile ± ilmenite + quartz. Interpreted P–T paths predict maximum pressures and peak metamorphic temperatures of ~9.6–10.3 kbar and ~785–790 °C. Monazite and xenotime ²⁰⁸Pb/²³²Th dates from porphyroblast inclusions indicate that metamorphism occurred at c. 74–54 Ma. Dates from HREE‐depleted monazite formed during prograde growth constrain peak metamorphism at c. 64 Ma near the centre of the complex, while dates from HREE‐enriched monazite constrain the timing of garnet breakdown during near‐isothermal decompression at c. 60–57 Ma. Near‐isothermal decompression to ~5.0–4.4 kbar was followed by cooling and further decompression. The youngest, HREE‐enriched monazite records leucosome crystallization at mid‐crustal levels c. 54–44 Ma. The northernmost sample records regional metamorphism during the emplacement of the Selkirk igneous complex (c. 94–81 Ma), Cretaceous–Tertiary metamorphism and limited Eocene exhumation. Similarities between the Priest River complex and other complexes of the northern North American Cordillera suggest shared regional metamorphic and exhumation histories; however, in contrast to complexes to the north, the Priest River contains less partial melt and no evidence for diapiric exhumation. Improved constraints on metamorphism, deformation, anatexis and exhumation provide greater insight into the initiation and evolution of metamorphic core complexes in the northern Cordillera, and in similar tectonic settings elsewhere.     

On some problems of seismic crustal phase

ＯｎｓｏｍｅｐｒｏｂｌｅｍｓｏｆｓｅｉｓｍｉｃｃｒｕｓｔａｌｐｈａｓｅＨｕａｎ－ＣｈｅｎｇＧＥ（葛焕称）（ＳｅｉｓｍｏｌｏｇｉｃａｌＢｕｒｅａｕｏｆＪｉａｎｇｓｕＰｒｏｖｉｎｃｅ,Ｎａｎｊｉｎｇ２１００１４,Ｃｈｉｎａ）Ａｂｓｔｒａｃｔ：Ｉｎｔｈｉｓ...     

SAR影像与光学影像的高斯伽玛型边缘强度特征匹配法

提出了一种基于影像边缘强度图描述的SAR影像与光学影像匹配方法。首先对影像进行粗纠正,消除影像之间的尺度和旋转变化;其次,改进相位一致性特征检测方法,提取对影像相干斑噪声稳健的特征点;然后基于高斯伽玛型双边窗口比值算子计算影像边缘强度图,在此基础上构造不变特征描述符;最后联合几何约束条件,实现SAR影像与光学影像匹配。试验结果证明,与现有方法相比,本文方法能够大幅提高SAR影像与光学影像匹配结果中的正确匹配特征数量以及影像配准精度。     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.     

低速十字路口交通流模型相图

研究由两个单车道构成低速十字路口交通流模型.模型中两车道上的车辆更新遵循无交通灯管制下的并行规则.依据构建相图的原则并采用局部占有概率方法,建立相图,给出相图中的各部分区域的流量表达式.两车道均采用周期边界条件和确定性FI模型进行数值模拟,模拟结果与理论分析精确一致.模型中两条车道的行车规则更接近实际道路交通,该结果为交通管理提供一定的指导作用.