油气系统动力学模拟方法评价

介绍了油气系统研究中最新发展起来的油气系统动力学方法;在与常规油气盆地模拟方法进行比较研究的基础上,对系统动力学模拟方法进行了评价,指出系统动力学模拟可较好地解决目前油气盆地模拟中存在的许多关键问题,是研究油气系统的有效途径。     

海洋生态系统动力学研究的相关网上资源

分４部分介绍互联网上与海洋生态系统动力学研究有关的信息资源、主要网址及其主要内容：（１）海洋生态系统模拟研究;（２）海洋科学研究组织和国际研究计划;（３）网上新闻讨论组;（４）海洋生态杂志。     

Application of an optical nitrate profiler to high- and low-turbidity coastal shelf waters

Here, we report the results of high-resolution nitrate measurements using an optical nitrate profiler(in situ ultraviolet spectrophotometer, ISUS) along transect across a high-turbidity shelf(East China Sea) and a lowturbidity shelf(Chukchi Sea). The ISUS-measured nitrate concentrations closely reproduced the results measured by conventional bottle methods in low-turbidity waters. However, for high-turbidity waters of the East China Sea(salinity<30), a correction factor of 1.19 was required t...     

基于监测数据的深水水下井口循环弯矩计算方法

水下井口的疲劳完整性是海洋油气田长期安全开采的前提。工业界往往采用贴应变片直接测量水下井口应变来计算弯矩和疲劳损伤,但水下井口应变片粘贴困难且不能长时间连续工作。采用对水下井口监测方法,基于隔水管—防喷器组—水下井口的运动和力学特性,考虑防喷器组惯性力矩建立系统耦合动力学方程,最终形成基于监测数据的水下井口循环弯矩计算方法。以南海某深水水下井口为例,建立隔水管—防喷器组—水下井口系统有限元模型并进行动态分析,提取隔水管底部张力、转角、防喷器组加速度及转角等参数,代入所建立的系统耦合动力学模型,得到水下井口弯矩与有限元计算结果吻合良好。研究表明只需通过在线监测获得所需的输入数据,无需监测水下井口应变即可获取水下井口循环弯矩。建立的系统耦合动力学模型可为水下井口疲劳完整性评估提供理论依据。     

福建闽江水口水库凤眼莲空间分布特征及其动态

为研究闽江水口水库凤眼莲空间分布特征及动态变化,根据2001-2009年水口库区无云覆盖的24幅卫星遥感影像,构建研究区域凤眼莲干流-支流分布的空间结构,并通过建立端元的混合象元线性分解模型,对福建省水口水库不同时间、不同区域的凤眼莲分布特征进行系统分析,结果表明,随着时间的推移,凤眼莲的暴发区逐渐向下游迁移,同时,支流对研究区域凤眼莲的面积有重要影响,特别是河流较长、周边有人口居住的支流是凤眼莲源头治理的重点;各种人为或自然原因造成的水体富营养化、河流流速变缓等是凤眼莲泛滥的重要原因.建议针对研究区域上游及其周边进行养殖污染、工业污染整治,强化对污染源的监督管理,推进生态环境建设与保护,建设生态功能保护区等.本研究可为了解水口水库的凤眼莲时空分布规律,进而制定相应的预防与控制管理措施提供必不可少的数据基础和理论依据.     

Rapid magnetic susceptibility measurement as a tracer to assess the erosion–deposition process using tillage homogenization and simple proportional models: A case study in northern of Morocco

Soil erosion is a significant threat in the Rif region in northern Morocco. Hence, accurate cartography of the phenomenon, magnitude, and extent of erosion in the area needs a simple, rapid, and economical method such as magnetic susceptibility (MS). The current study aims to: (i) determine the factors influencing the variation of soil MS, (ii) exploit MS to estimate soil loss using two approaches in different homogenous units characterized by the same climatic conditions with different edaphic characteristics (land use, slope, and lithology), and (iii) highlight the potential for using MS as a cheap and rapid tracer of a long term erosion and deposition processes. Mass-specific magnetic susceptibility at low (χ_lf) and high (χ_hf) frequencies were measured for 182 soil samples collected in the study area. A tillage homogenization (T-H) model and a simple proportional model (SPM) were applied on an undisturbed soil profile to predict the eroded soil depths for given cores. The results confirm that χ_lf is influenced by land use, slope, and soil type. Pedogenesis is the main factor affecting soil MS enhancement, indicated by homogenous magnetic mineralogy with a dominance of super-paramagnetic (SP) and stable single domain (SSD) magnetic grains. The study results show that higher soil losses have occurred in almost all the soil samples when applying the T-H model compared to application of the SPM. The SPM underestimates erosion due to its ignorance of the MS of the plow layers after erosion. The current study implies the high efficacy of magnetic susceptibility as the quick, easily measurable, simple, and cost-effective approach that can be used as an alternative technique for evaluating soil redistribution.     

Inhibitability of soil loss and sediment concentration during consecutive rainfalls from experimental plots treated by endemic microorganisms

Consecutive rainfalls, due to changes in antecedent moisture, alter soil erosion processes, necessitating the implementation of suitable soil loss control methods. Biological soil microorganism approaches have been applied to control soil loss. However, information on the involvement of microorganisms in the soil loss and rill erosion processes has yet to be supplied. In this study, the individual and combined inoculation of cyanobacteria and bacteria was investigated during five consecutive rai...     

Base flow separation for soil erosion simulation in a granitic forested headwater catchment using a process-based model,GeoWEPP

Distributed erosion models, which simulate the physical processes of water flow and soil erosion, are effective for predicting soil erosion in forested catchments. Although subsurface flow through multiple pathways is dominant for runoff generation in forested headwater catchments, the process-based erosion model, Geo-spatial interface for Water Erosion Prediction Project(Geo WEPP), does not have an adequate subsurface component for the simulation of hillslope water flow. In the current study, t...     

Vibration of vertical rectangular plate in contact with water on one side

In this paper, the vibratory characteristics of a rectangular plate in contact with water on one side are studied. The elastic plate is considered to be a part of a vertical rectangular rigid wall in contact with water, the edges of which are elastically restrained and parallel to those of the rigid wall. The location and size of the plate on the rigid wall may vary arbitrarily. The water with a free surface is in a rectangular domain infinite in the length direction. The effects of free surface waves, compressibility of the water and the hydrostatic water pressure are neglected in the analysis. An analytical‐Ritz method is developed to analyse the interaction of the plate–water system. First of all, by using the method of separation of variables and the method of Fourier series expansion, the exact expression of the motion of water is derived in the form of integral equations including the dynamic deformation of the plate. Then the Rayleigh–Ritz approach is used to derive the eigenfrequency equation of the system via the variational principle of energy. By selecting beam vibrating functions as the admissible functions of the plate, the added virtual mass incremental (AVMI) matrices for plate vibration are obtained. The convergency studies are carried out. The effects of some parameters such as the depth and width of water, the support stiffnesses, location and aspect ratio of the plate and the plate–water size and density ratios on the eigenfrequencies of the plate–water system are investigated. Several numerical examples are given. The validity of AVMI factor approach is also confirmed by comparing the AVMI factor solutions with the analytical‐Ritz solutions. The results show that the approach presented here can also be used as excellent approximate solutions for rectangular plates in contact with water of infinite width and/or infinite depth. Copyright © 2000 John Wiley & Sons, Ltd.