Seasonal variation of airborne fungi of the Tiantishan Grottoes and Western Xia Museum,Wuwei, China

In this study, a systematic survey of cultural airborne fungi was carried out in the occurrence environments of wall paintings that are preserved in the Tiantishan Grottoes and the Western Xia Museum, China. A bio-aerosol sampler was used for sampling in four seasons in 2016. Culture-dependent and -independent methods were taken to acquire airborne fungal concentration and purified strains; by the extraction of genomic DNA, amplification of fungal ITS rRNA gene region, sequencing, and phylogenetic analysis, thereafter the fungal community composition and distribution characteristics of different study sites were clarified. We disclosure the main environmental factors which may be responsible for dynamic changes of airborne fungi at the sampling sites. The concentration of cultural airborne fungi was in a range from 13 to 1,576 CFU/m³, no significant difference between the two sites at the Tiantishan Grottoes, with obvious characteristics of seasonal variation, in winter and spring were higher than in summer and autumn. Also, there was a significant difference in fungal concentration between the inside and outside of the Western Xia Museum, the outside of the museum was far more than the inside of the museum in the four seasons, particularly in the winter. Eight fungal genera were detected, including Cladosporium, Penicillium, Alternaria, and Filobasidium as the dominant groups. The airborne fungal community structures of the Tiantishan Grottoes show a distinct characteristic of seasonal variation and spatial distribution. Relative humidity, temperature and seasonal rainfall influence airborne fungal distribution. Some of the isolated strains have the potential to cause biodeterioration of ancient wall paintings. This study provides supporting information for the pre-warning conservation of cultural relics that are preserved at local sites and inside museums.     

密肋复合墙体的地震损伤极限概率分析

密肋复合墙体是密肋壁板结构体系的主要承载构件,本文根据32块密肋复合墙体在单调及低周往复循环荷载作用下的试验结果,结合我国现行规范的目标性能,提出了针对密肋复合墙体的三个损伤性能水平及相应的量化参数,研究了这种新型墙体的损伤模型及各性能水平的允许极限破坏指标的概率特性。结果表明,采用四种地震损伤模型计算的墙体屈服、极限、破坏状态的损伤指数,在给定的显著性水平下分别服从正态分布、对数正态分布或极值Ⅰ型分布,并得到了分布的统计参数,可为该类墙体基于损伤性能的可靠度分析提供依据和参考。     

高层钢板剪力墙结构底部加强层抗震性能分析

采用非线性有限元软件Msc．Marc对高层钢管混凝土组合框架-钢板剪力墙结构底部四层两跨未加劲薄钢板墙模型进行了推覆分析与滞回分析。计算结果表明,组合钢板剪力墙结构具有良好的延性及稳定的滞回性能,结构进入弹塑性阶段后钢板墙的拉力带方向与CAN／CSA S16—01（2001）推荐公式吻合良好。根据分析结果,比较了不同分析类型及不同钢板墙厚度的影响。研究发现,考虑钢材强化及包辛格效应后,结构滞回分析的极限承载力将小于推覆分析的极限承载力;随着钢板墙厚度的增大,结构的弹塑性屈曲模态由局部屈曲向整体屈曲过渡;在罕遇地震作用下,钢板墙结构的底层边缘约束柱将产生较大的轴拉力,甚至被拉断而导致结构整体破坏。     

Effect of abutment modeling on the seismic response of bridge structures

Abutment behavior significantly influences the seismic response of certain bridge structures. Specifically in the case of short bridges with relatively stiff superstructures typical of highway overpasses, embankment mobilization and inelastic behavior of the soil material under high shear deformation levels dominate the response of the bridge and its column bents. This paper investigates the sensitivity of bridge seismic response with respect to three different abutment modeling approaches. The abutment modeling approaches are based on three increasing levels of complexity that attempt to capture the critical components and modes of abutment response without the need to generate continuum models of the embankment, approach, and abutment foundations. Six existing reinforced concrete bridge structures, typical of Ordinary Bridges in California, are selected for the analysis. Nonlinear models of the bridges are developed in OpenSees. Three abutment model types of increasing complexity are developed for each bridge, denoted as roller, simplified, and spring abutments. The roller model contains only single-point constraints. The spring model contains discrete representations of backfill, bearing pad, shear key, and back wall behavior. The simplified model is a compromise between the efficient roller model and the comprehensive spring model. Modal, pushover, and nonlinear dynamic time history analyses are conducted for the six bridges using the three abutment models for each bridge. Comparisons of the analysis results show major differences in mode shapes and periods, ultimate base shear strength, as well as peak displacements of the column top obtained due to dynamic excitation. The adequacy of the three abutment models used in the study to realistically represent all major resistance mechanisms and components of the abutments, including an accurate estimation of their mass, stiffness, and nonlinear hysteretic behavior, is evaluated. Recommendations for abutment modeling are made.     

对河南省栾川县大练沟泥石流治理的经验总结

随着国民经济迅速发展,对矿产资源的需求日益增多,20世纪七、八十年代的开采只追求产量和经济效益,而忽视了对环境的保护,开采的矿渣乱排乱放现象非常严重,严重破坏了环境,象这样的矿山在全国各地有很多,随着时间的发展,松散堆积的矿渣在洪水的作用下顺着沟道倾泻而下,形成泥石流,对下游的人民生命财产造成严重的破坏和威胁,矿山泥石流逐步发展,进入发展期和活跃期,必将造成更大的危害。因此对这样的泥石流沟进行研究和治理是很有必要的。在对河南省栾川县大练沟泥石流的治理过程中,得出以下几点体会,现总结归纳出来,希望对类似泥石流沟的治理提供借鉴。     

沪蓉高速柴家湾隧道围岩稳定性分析及支护效果研究

隧道围岩的应力分布及变形特征对保证其长期稳定性具有关键的作用。本文以柴家湾隧道为例进行实态建模,通过采用有限元软件ANSYS对其施工全过程进行了三维弹塑性数值模拟计算。研究结果表明,隧道拱顶和拱脚处应力集中现象明显,局部可能出现拉应力;变形主要集中在拱顶、拱腰部位,衬砌单元所受内力在规定强度范围以内,支护措施合理有效。     

天柱县主山冲-磨山金矿田北东段剪切带浅析

本文通过对天柱县主山冲-磨山金矿田北东段剪切带构造进行野外剖面观测及镜下变形构造研究,初步认为所见构造岩类主要为碎裂岩系列的初碎裂岩、碎裂岩、超碎裂岩,仅个别地段(主山冲剖面南部、油麻坳剖面中部)见有糜棱岩系列的糜棱岩化岩石或初糜棱岩,得出结论:该剪切带构造主要为脆性剪切带,个别地段可称为脆韧性剪切带,而尚未见到韧性剪...     

陕西凤县八卦庙金矿床成矿地质特征及外围找矿前景分析

阐述了八卦庙金矿床经历了长期、复杂的非线性成矿过程，着重分析了：含矿建造为与同生伸展断裂伴生的海底喷流热水沉积岩、热水浊积碎屑岩；脆-韧性剪切构造控制着主成矿过程；后期幔源岩浆气液叠加富集使其成为超大型金矿床。指出矿床成因为热水同生沉积细碎屑岩-剪切蚀变岩-幔源岩浆气液叠加富集型。八卦庙金矿床外围仍有巨大的找矿前景。     

四川冕宁金林金矿地质特征及找矿前景

金林金矿位于冕西韧性剪切带的东带。矿体赋存在燕山期变质流纹斑岩、霏细岩中。矿体受北东向断层破碎带控制，含金石英脉充填在由主断裂派生的北东、北西、近东西向三组裂隙中。该矿床属岩浆期后中一低温热液充填一交代石英脉型金矿床。矿区及其外围成矿地质条件良好，通过进一步工作可望找到较大的金矿床。     

非饱和土的有效应力与抗剪强度

从孔隙土的存在状态出发，探讨了吸力的两种不同作用效果与非饱和形态的关系，从理论上论证了Bishop公式的正确性澄清了多年来一个基本概念上的误解。用新的观点阐述了非饱和土中抗剪强度分布不均匀及浸水湿陷的原因；同时还对Fredlund和卢肇钧提出的抗剪强度理论及参数的测试方法进行了分析，提出了各种抗剪强度理论在理论上都是相同的，其区别仅在于确定由吸力产生的那部分有效应力时采用的参数和测试 方法不同。为今后非饱和土的抗剪强度研究从理论转向实用提供了理论基础。