1995年7月25日那坡4.3级地震概述

1995年7月25日广西那坡发生了4．3级地震,通过对那坡地区的地震地质、地震前兆、地震序列等资料分析,认为此次地震发生在北东向德隆一下华断裂带上,地震等烈度线长轴为北东向,宏观震中在那坡县规弄山中,震源机制解结果表明节面Ⅰ是本次地震的主破裂面,走向北东,与德隆一下华断裂一致。由于震中附近观测台站较少,震前没有发现前兆异常,测震学资料在很大程度上又受到北部湾6．1、6．2级地震序列的影响,无法分辩异常,据震后调查震前有少量宏观异常现象出现。     

深圳抽水蓄能电站水压致裂法三维地应力测量和分析

由于水压致裂法地应力测量的突出优点已在国内外得到广泛应用,但以往只能测量钻孔横截面上的二维应力状态。近期兴起的水压致裂法三维地应力测量,已在多个工程中得到应用。深圳抽水蓄能电站采用了3个不同方向钻孔测量法和单钻孔测量法进行了三维地应力测量,得到了很好的测量成果。其中单钻孔三维地应力测量,在近水平向和铅垂向两个钻孔中应用。三维地应力测量成果不仅得到了相应钻孔横截面上和原生裂隙面上二维应力实测值的检验,而且得到了同一位置两种不同三维地应力测量方法的相互印证,和同一个钻孔（铅垂向）中套芯应力解除法三维地应力实测值的印证。两种水压致裂法三维地应力测量成果（单钻孔测量法包含了非铅垂向和铅垂向钻孔的两种测量法）非常一致,能够代表该测量区的地应力状态。     

Seismically induced landslide displacements: a predictive model

Newmark's model for predicting earthquake-induced landslide displacements provides a simple way to predict the coseismic displacements affecting a sliding mass subject to earthquake loading. In this model, seismic slope stability is measured in terms of critical acceleration, which depends on the mechanical soil properties, pore-pressure distribution, and slope geometry. The triggering seismic forces are investigated in terms of energy radiation from the source, propagation, and site effects, based on 190 accelerometric recordings from 17 Italian earthquakes with magnitudes between 4.5 and 6.8. The method is based on the calibration of relations having the general form of an attenuation law that relates the energy of the seismic forces to the dynamic shear resistances of the sliding mass to propagate the expected landslide displacements as an inverse function of the distance from the fault rupture; the amount of displacement computed through these relations provides a criterion to predict the occurrence of slope failures. Finally, maps showing, in a deterministic and a probabilistic way, the potential of seismically induced landslide displacements are displayed as a tool to provide seismic landslide scenarios and earthquake-induced landslide hazard maps, respectively.     

Characterization of seismic hazard and structural response by energy flux

Seismic safety of structures depends on the structure's ability to absorb the seismic energy that is transmitted from ground to structure. One parameter that can be used to characterize seismic energy is the energy flux. Energy flux is defined as the amount of energy transmitted per unit time through a cross-section of a medium, and is equal to kinetic energy multiplied by the propagation velocity of seismic waves. The peak or the integral of energy flux can be used to characterize ground motions. By definition, energy flux automatically accounts for site amplification. Energy flux in a structure can be studied by formulating the problem as a wave propagation problem. For buildings founded on layered soil media and subjected to vertically incident plane shear waves, energy flux equations are derived by modeling the building as an extension of the layered soil medium, and considering each story as another layer. The propagation of energy flux in the layers is described in terms of the upgoing and downgoing energy flux in each layer, and the energy reflection and transmission coefficients at each interface. The formulation results in a pair of simple finite-difference equations for each layer, which can be solved recursively starting from the bedrock. The upgoing and downgoing energy flux in the layers allows calculation of the energy demand and energy dissipation in each layer. The methodology is applicable to linear, as well as nonlinear structures.     

State-of-the-art of geotechnical earthquake engineering practice

Major developments in geotechnical earthquake engineering practice over the last 15 years are reviewed. The objectives of the review are to present a coherent view of the current state of practice at the highest level and to examine trends, which may shape practice in the future. Developments are described in the following areas: specification of design ground motions, dynamic response analysis, evaluation of liquefaction potential, evaluation of residual strength of liquefied soil, post-liquefaction displacement analysis, and seismic risk analysis.     

Seismic stability analysis of reinforced slopes

In this paper, the seismic stability of slopes reinforced with geosynthetics is analysed within the framework of the pseudo-static approach. Calculations are conducted by applying the kinematic theorem of limit analysis. Different failure modes are considered, and for each analytical expressions are derived that enable one to readily calculate the reinforcement force required to prevent failure and the yield acceleration of slopes subjected to earthquake loading. Several results are presented in order to illustrate the influence of seismic forces on slope stability. Moreover, a suitable procedure based on the assessment of earthquake-induced permanent displacement is proposed for the design of reinforced slopes in seismically active areas.     

A Preliminary Interpretation of Near-field Observation Data of the Zhangbei Earthquake

In this paper, a preliminary data processing was made for tbe aftershock records or theZhangbei M6.2 earthquake on Jan. 10, 1998. The hypocenters of 205 earthquakes with M_L≥0.5 were located. The result shows that most aftershockS were concentrated in a more than10 km long and 5～8 km wide NE-trending beIt. The source mechanism solutions of largeraftersbocks were also calculated, from which it can be inferred that the faulted zone of themain shock is an NE-trending fault. Furthermore, the spectral analysis of P waves was made.The corner frequency is about 10 Hz.     

浅析中国地区体波走时层析成像研究进展

将中国地区划分为东西两部分详细地讨论了中国地区体波走时层析成像研究现状。总结了中国地区三维速度结构的一些特征：地震波速度存在明显的横向不均匀性,甚至在1100km左右深入还保留了这一特点,浅部层面地震波速度图像与地表已知的地质特征有较好的相关性,速度图像与地震活动性有一定的对应关系,岩石层厚度及地壳厚度的起伏状况等;最后分析了目前中国地区体波走时层析成像研究工作的特点并提出了一种可能的发展趋势。