The Character of Shear-wave Splitting in Marble in the Critical State of Rupture

This paper mainly observed and analyzed the character of shear-wave splitting in rock specimens while they were in the critical state of rupture. The rock specimens for study are made of Laizhou marble from Shandong, China. A series of records were obtained from two rock specimens when they were in the critical state of rupture. The result shows that, in the critical state just before rock rupture, there may be the phenomenon of rise and fall in the time delay of shear-wave splitting, even though the load was kept constant. That is to say, the time delay of shear-wave splitting may have a falling process before rock rupture.     

Thermoelastic model of minerals: application to Al2O3

 A thermoelastic model for calculating the high-pressure and high-temperature properties of isotropic solids is presented by extending the formalism by Thomsen and combining the resulting one with the Vinet model for static lattice and the Debye model for lattice vibration. Applying it to polycrystalline corundum, we have shown that the calculated values of entropy and heat capacity at constant pressure are in agreement with literature values to 2325 K at zero pressure and that the calculated values of thermal expansivity agree reasonably with experimental data to 1100 K at zero pressure. The model reproduces experimental data of sound velocities v _p and v _s of compressional and shear waves to 1825 K at zero pressure and those to 62 GPa at room temperature, and it reproduces also experimental shock-wave equation of state to 150 GPa. The velocity correlation (∂ln v _s /∂ln v _p ) _S was found to have weak pressure and temperature dependences and the results under lower mantle conditions are compared with those of magnesian and calcium silicate perovskites and magnesiowüstite, and the PREM values of the Earth's lower mantle. Received: 12 February 2000 / Accepted: 15 July 2000     

Application of Signal Processing Methods to Shear-Wave Splitting Study

This paper briefly discusses the new methods that the authors have put forward to distinguish splitting shear-waves.By combining these new methods with other methods,the authors have processed the recorded data of an earthquake.The study results are consistent with each other.     

Seismic anisotropy beneath Southern Tibet

ＳｅｉｓｍｉｃａｎｉｓｏｔｒｏｐｙｂｅｎｅａｔｈＳｏｕｔｈｅｒｎＴｉｂｅｔＱＩＮＧ－ＴＩＡＮＬＵＩ（吕庆田），ＫＡＩ－ＹＩＭＡ（马开义），ＭＥＩＪＩＡＮＧ＇（姜枚），Ａ．ＨｉｒｎａｎｄＡ．Ｎｅｒｃｅｓｓｉａｎ（ＩｎｓｔｉｔｕｔｅｏｆＭｉｎｅｒａｌＤｅ...     

柴达木盆地深部物理参数的反演

通过研究地球对表面载荷的响应来反演确定地球深部的物理参数.采用分为4层的地球模型,各层的介质被看作Maxwell粘弹性体.将柴达木盆地沉降发育过程中积累的沉积物作为随时间变化的载荷加于地表,通过拟合柴达木盆地沉降中心附近地区的沉降过程来研究该地区地壳的厚度及剪切模量、岩石层地幔的粘性及软流层的粘性等物理参数.计算结果表明,该地区地壳的剪切模量不会超过全球平均值的60％,岩石层地幔的粘性系数不大于1.5×10²³Pa·s.通过研究对该地区的深部物理参数得出了新的认识.     

地震区多层石结构抗震抗剪能力的模糊可靠性分析

本文通过考虑地震烈度的随机性和模糊性,以及石结构强度破坏等级界限的模糊性,研究多层石结构抗震抗剪能力的可靠性问题.将地震地面运动模拟为含有模糊烈度参数的平稳过滤有色噪声的随机过程,引入抗剪强度破坏指数,建立了石结构抗震抗剪能力的模糊安全准则,为研究多层石结构的抗震抗剪能力可靠性提供了一个合理的评定方法。     

锈蚀钢筋混凝土框架中节点抗剪强度研究

随着服役时间的增长，侵蚀环境下钢筋混凝土框架节点因钢筋发生不同程度的锈蚀而造成承载性能下降，严重影响建筑结构的安全使用。本文在已有钢筋混凝土框架节点抗剪强度理论模型的基础上，考虑钢筋锈蚀对框架节点受力性能的影响，建立锈蚀钢筋混凝土框架中节点受剪承载力计算公式。通过11组锈蚀钢筋混凝土节点试验数据，对建议理论模型进行验证。研究结果表明，锈蚀钢筋混凝土节点受剪承载力试验值与理论计算值之比的平均值为0.951，方差为0.075，二者吻合较好，本文建议的计算方法可用于锈蚀钢筋混凝土框架中节点承载力分析。     

Sigmoidal exsolution by internal shear stress in pyroxenes from chondritic meteorites

Pyroxenes of pigeonitic and augitic bulk compositions in H3–4 chondritic meteorites commonly exhibit sigmoidal precipitates, rather than the elsewhere common lamellar associations. Most often, submicrometric sigmoids with calcic clinopyroxene composition occur within clinoenstatite; more rarely, clinoenstatite sigmoids occur within calcic clinopyroxene. The sigmoids appear as 001 terminated lamellae, with terminations rotated in opposite directions towards the 100 orientation. Pre-exsolution pigeonite and augite formed at temperatures higher than 980 °C, whereas sigmoidal exsolution occurred between 990 and 830 °C. Local anomalous lattice parameters determined by electron diffraction suggest that lattice parameters are most strained where the exsolution texture is most poorly defined. Shear strain occurs during exsolution due to mismatching lattice parameters and variable angles. In response to shear stress, the lamellae relax and assume sigmoidal strained morphologies. Sigmoidal exsolution is strongly controlled by (100) orthoenstatite stacking faults that possibly trigger exsolution.     

Monitoring of fault healing after the 1999 Kocaeli, Turkey, earthquake

The North Anatolian fault zone that ruptured during the mainshock of theM 7.4 Kocaeli (Izmit) earthquake of 17 August 1999 has beenmonitored using S wave splitting, in order to test a hypothesisproposed by Tadokoro et al. (1999). This idea is based on the observationof the M 7.2 1995 Hyogo-ken Nanbu (Kobe) earthquake, Japan.After the Hyogo-ken Nanbu earthquake, a temporal change was detectedin the direction of faster shear wave polarization in 2–3 years after the mainshock (Tadokoro, 1999). Four seismic stations were installed within andnear the fault zone at Kizanlik where the fault offset was 1.5 m, about80 km to the east of the epicenter of the Kocaeli earthquake. Theobservation period was from August 30 to October 27, 1999. Preliminaryresult shows that the average directions of faster shear wave polarization attwo stations were roughly parallel to the fault strike. We expect that thedirection of faster shear wave polarization will change to the same directionas the regional tectonic stress reflecting fault healing process. We havealready carried out a repeated aftershock observation at the same site in2000 for monitoring the fault healing process.