Application of the Single-Bubble Airgun Technique for OBS-Data Acquisition Across the Jan Mayen Ridge,North Atlantic

A 140 km long wide-angle seismic profile has been acquired by use of 6 Ocean Bottom Seismographs across the Jan Mayen Ridge, North Atlantic. The profile was acquired twice; once with a traditionally tuned standard source and secondly with a somewhat smaller source tuned on the first bubble pulse. Analysis of the frequency content of the data reveals that the single-bubble source within the 10-15 Hz frequency range generates a signal with a level about 5 db above that of the standard source. These differences can partly be related to differences in airgun depth. The higher output level for these frequencies enables the single-bubble source to resolve intra-crustal structures with a higher degree of certainty, when compared to the data acquired by use of the standard source array. The standard source seems to generate slightly more energy for frequencies around 6 Hz, probably due to the use of a large 1200 in/sup3 gun in this array. These low frequencies a re of importance for mapping of lower crustal and upper mantle structures, and it is recommended that this is taken into account when seismic sources for mapping of deep crustal and upper mantle structures are designed.     

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.     

Nature of the connection between the Northern and Southern Zechstein Basins across the Mid North Sea High

The seismic expression of a salt-filled channel which cuts across the Mid North Sea High in Quadrant 37 is described, with features interpreted as being produced by salt-edge dissolution forming both eastern and western margins of the channel. The apparent half-graben nature of the channel is shown to be only superficial, and due to complex faulting associated with, but not defining, its western margin. The shallower faulting here is a Mesozoic to early Tertiary growth fault related to local dissolution of Zechstein salt. The dissolution effect appears in turn to have been localized by the presence of a deeper fault that was already downthrown to the east in Zechstein times, when it seems to have limited the eastward progradation of Zechstein shelf carbonates and anhydrites, and had probably ceased to move significantly before the onset of the Late Cimmerian erosional phase. The origin of this arcuate fault is tentatively ascribed to subsidence around a granite batholith. Zechstein salt originally spread some distance to the east and west of the channel; it was dissolved from the edges inwards, mainly before the Late Cretaceous, giving rise to a thicker Mesozoic sequence on parts of the flanks of the channel than in the middle. Besides providing an interesting structural case history, the features described have implications regarding Zechstein sedimentation, reservoir potential, the tectonic history of the North Sea, and the nature of the Mid North Sea High itself.     

Stability of waterfront retaining wall subjected to pseudo-static earthquake forces

Waterfront retaining walls supporting dry backfill are subjected to hydrostatic pressure on upstream face and earth pressure on the downstream face. Under seismic conditions, if such a wall retains a submerged backfill, additional hydrodynamic pressures are generated. This paper pertains to a study in which the effect of earthquakes along with the hydrodynamic pressure including inertial forces on such a retaining wall is observed. The hydrodynamic pressure is calculated using Westergaard's approach, while the earth pressure is calculated using Mononobe-Okabe's pseudo-static analysis. It is observed that when the horizontal seismic acceleration coefficient is increased from 0 to 0.2, there is a 57% decrease in the factor of safety of the retaining wall in sliding mode. For investigating the effect of different parameters, a parametric study is also done. It is observed that if φ is increased from 30° to 35°, there is an increase in the factor of safety in the sliding mode by 20.4%. Similar observations were made for other parameters as well. Comparison of results obtained from the present approach with [Ebeling, R.M., Morrison Jr, E.E., 1992. The seismic design of waterfront retaining structures. US Army Technical Report ITL-92-11. Washington DC] reveal that the factor of safety for static condition (k_h=0), calculated by both the approaches, is 1.60 while for an earthquake with k_h=0.2, they differ by 22.5% due to the consideration of wall inertia in the present study.     

鲁南近浅海沉积物样品的因子分析及其地质意义

本文提出河流携带入海的沉积物或沿岸剥蚀物中矿物的分布及再组合是受多种因素控制的。为了确定控制鲁南两城河至白马河沉积物样品中矿物分布及再组合的主要因素,作者对该区109个沉积物样品的重矿物资料进行了Q型和R型因子分析。研究指出,在诸多的河流中,白马河和两城河是控制该区沉积物分布的最上要的河流;矿物的化学稳定性是决定该区矿物再组合的主要因素。     

山东莱州仓上泻湖Y86孔微量元素地球化学特征及沉积相判别

本文通过对山东莱州仓上泻湖Y86孔柱状样的系统取样，利用X荧光光谱分析了沉积柱状样品中的主要微量元素含量，结合已有的粒度分析、微体古生物及孢粉结果相分析对比，对泻湖沉积相进行地球化学判别，结果表明，Rb，Cr，Nb，Ni，Rb，Sr，Th，V，Zn，Zr等元素含量及Sr／Ba，Sr／Ca、Mn／Fe比值在不同的沉积相中均有明显的变异特征。因此可根据泻湖沉积物中的微量元素含量及Sr／Ba，Sr／Ca，Mn／Fe比值判别泻湖沉积环境及沉积相。     

Geodynamic Evolution of the Eastern Segment of the Azores-Gibraltar Zone: The Gorringe Bank and the Gulf of Cadiz Region

Detailed structural interpretation of the recently acquired deep seismic multichannel profiles along the Iberian Atlantic Margins (IAM Project) provides new results on the geodynamic evolution of the eastern part of the Azores-Gibraltar plate boundary. Thrusting and folding of the oceanic basement and of Mesozoic and Cenozoic sedimentary cover of the Gorringe Bank region are consistent with the N–S convergence of Iberia and Africa. Compressive structures in the Gorringe Bank region are spread over a wide area. Deformation under compression took place mainly in Tertiary times, as is evidenced by a basal unconformity and several discontinuities in Tertiary sediments, although some deformation has also been recorded in Quaternary sediments. The compressive structures in the Gulf of Cadiz are E–W oriented thrusts, folds and related diapiric structures. N–S oriented transpressive deformation is likely to occur in the western Portuguese platform. There is no continuity of structures from the oceanic to the continental domain, suggesting that deformation transfers from one side to the other through a transcurrent fault zone. The fault contact between the two domains is located in the ocean-continent transition zone.     

山东全新世滨海软土与工程地质灾害的研究

山东全新世滨海软土分布在海湾、泻湖、河口区，厚度１－１０ｍ。海湾、泻湖软土为淤泥、淤泥质土，陆源物质供应丰富的浅水区，软土颗粒偏粗，强度相对较高，触变性对建筑物危害性大，陆源物质供应少的深水区，软土颗粒偏细，低强度、高压缩性、沉降变形大和蠕变性是危及建筑物稳定的主要因素。海湾、泻湖软土位于地下水位下，具低透水性，掩埋后短期不易排水固结，软土下为强度较高的冲积物，对一般建筑物，利用强夯、粉喷搅拌桩、     

柴达木盆地新构造运动主要特征与成因机制

研究表明，在壳幔结构、地球物理背景、沉积物结构、多层关地幔和构造样式等方面，达木盆地与中国东部新生代裂谷类伸展盆地具有可比性，应该归属 展性盆 。盆地伸展和收缩作用相间进行，伸展起因于地幔底辟；而收缩受两人因素影响；（１）盆地伸展作用受相邻造山带反作用诱导的挤压应力；（２）板块碰撞传递的远程板内应力。在此基础邮新的构造期达木盆地演化的“双层模式”，即地幔上隆－地壳伸展；被动挤压＋板内应力－地壳收缩     

波浪底摩擦力对重砂富集的影响——以鲁南近岸区为例

根据浅水波浪的底摩擦效应，对鲁南灵山湾和臼－岚山镇近岸区进行了波浪的海底摩擦力计算。波浪的海底摩擦力等值图与已知滨海锆石砂矿资料对比表明，底摩擦力大于０．１８Ｎ／ｍ＾２的动力分选区有利于重矿物砂富集。据此，进一步预测了鲁南近岸带的砂矿富集区。