碎冰条件下单点系泊船舶动态响应特性研究

为了研究不同单点系泊位置对极地系泊船舶在来冰角度改变时动态响应的影响,运用离散元方法(DEM),计算了船舶在60%密集度下,冰速为1.0 m/s、冰厚为1 m时不同角度的船冰阻力,结合系泊分析软件二次开发功能,计算分析系泊船舶在不同来冰角度和不同系泊位置下受上述冰情影响下的响应。通过对模拟结果与试验结果的对比,认为离散元方法(DEM)的数值模拟结果与试验结果吻合较好;单点系泊位置为距船头L/4时,系泊船舶能以最快速、最稳定的方式对来冰方向的变化做出响应。     

三亚湾海岸动力演变的数值模拟研究

近年来,海岸侵蚀呈现不断加剧的趋势,给沿海地区经济社会的发展造成了极大危害。关于三亚湾海岸侵蚀过程及其动力学研究多停留在定性或半定量阶段。从海岸动力地貌学角度出发,基于沉积物迁移理论,利用数值模拟方法,定量研究了三亚湾海岸在波浪和潮流作用下的动力演变过程。计算结果重现了海水波浪的传播形态及动态特征:涨潮时,波高极值相对较大,水位随之升高,波动现象明显,波动形态复杂;落潮时,波高极值相对减小,水位也随之降低,海面相对较平静,波形态在离岸区域较单一,仅在近岸区域相对多样化。同时,数值模拟结果也很好地显示了三亚湾岸线附近的沉积或侵蚀过程特征:三亚湾西段海洋动力条件较强,沉积或侵蚀现象明显,沉积/侵蚀能力由三亚湾西段逐渐向东段减小。此外,以海洋动力学机制为基础,定量模拟了三亚湾海岸侵蚀与演变物理过程,为该地区海岸开发利用、海岸环境保护提供科学依据。     

礁坪上波浪传播的数值模拟

本文基于具备间断捕捉能力的二阶全非线性Boussinesq数值模型,对规则波和随机波在礁坪地形上的传播变形进行了数值模拟。该模型采用高阶有限体积法和有限差分方法求解守恒格式的控制方程,将波浪破碎视为间断,同时采用静态重构技术处理了海岸动边界问题。重点针对礁坪上波浪传播过程中的波高空间分布和沿程衰减,礁坪上的平均水位变化,以及波浪能量频谱的移动和空间差异等典型水动力现象开展数值计算。将数值结果与实验结果对比,两者吻合情况良好,验证了模型具有良好的稳定性,具备模拟破碎波浪和海-岸动边界的能力,能较为准确地模拟波浪在礁坪地形上的传播过程中发生的各种水动力现象。     

南海北部海域油气资源调查技术及其应用研究——震源子波检测及模拟分析

在野外采集中考察气枪的稳定性以及室内进行确定性子波反褶积处理,都要求能够获得气枪阵列的实时远场子波。从震源子波检测方法出发,阐述了近场子波采集、幅值转换及记录流程,并列举出实测近场子波时需要考虑解决的问题;接着介绍了震源远场子波的获取方法和主要途径;震源近场子波及远场子波的实测方案,检测震源子波所需的仪器设备和采集技术方法。文中分析了气枪子波的气泡干扰问题,虚反射与后续气泡震荡间的关系以及吸收衰减对子波的影响,并根据实测远场子波,对齐氏和范氏两种气体模型进行了模拟效果对比,结果表明:采用范氏气体模型所模拟的子波与实际子波更为吻合,模拟出的气枪的子波波形、振幅大小、气泡周期上,与业界通用的Nucleus软件的模拟结果吻合较好,在后续的使用中将继续优化。     

日照豪迈码头港池布局对泥沙输移影响研究

港池的布局会改变其周边海域水动力条件及其泥沙冲淤状况,为了进一步了解其影响程度,本文以山东日照豪迈重工临港厂区运输码头的改造工程为研究对象,利用平面二维数值模型MIKE21/3 Integrated Models,建立了潮流和波浪耦合作用下的泥沙输移数值模型,对该工程附近海域进行了波浪、潮流和泥沙输移的数值模拟。同时采用实测数据对数值模型进行了验证,数值模拟结果与实测资料拟合较好,表明MIKE21能有效地模拟运输码头及其周围海域潮流的变化过程。以日照豪迈重工临港厂区运输码头为依托,基于数值模拟结果,分析不同改造方案下的水动力条件和泥沙冲淤状况。结果表明:港池布局对水动力条件影响甚微,对地形地貌冲淤影响较大;模拟结果确定港池南向开口为最佳改造方案,为工程的规划和设计提供科学依据。     

Estimation of mean and extreme waves in the East China Seas

Accurately estimating the mean and extreme wave statistics and better understanding their directional and seasonal variations are of great importance in the planning and designing of ocean and coastal engineering works. Due to the lack of long-term wave measurement data, the analysis of extreme waves is often based on the numerical wave hind-casting results. In this study, the wave climate in the East China Seas (including the Bohai Sea, the Yellow Sea and the East China Sea) for the past 35 years (1979–2013) is hind-casted using a third generation wave model – WAMC4 (Cycle 4 version of WAM model). Two sets of reanalysis wind data from NCEP (National Centers for Environmental Prediction, USA) and ECMWF (European Centre for Medium-range Weather Forecasts) are used to drive the wave model to generate the long-term wave climate. The hind-casted waves are then analysed to study the mean and extreme wave statistics in the study area. The results show that the mean wave heights decrease from south to north and from sea to land in general. The extreme wave heights with return periods of 50 and 100 years in the summer and autumn seasons are significantly higher than those in the other two seasons, mainly due to the effect of typhoon events. The mean wave heights in the winter season have the highest values, mainly due to the effect of winter monsoon winds. The comparison of extreme wave statistics from both wind fields with the field measurements at several nearshore wave observation stations shows that the extreme waves generated by the ECMWF winds are better than those generated by the NCEP winds. The comparison also shows the extreme waves in deep waters are better reproduced than those in shallow waters, which is partly attributed to the limitations of the wave model used. The results presented in this paper provide useful insight into the wave climate in the area of the East China Seas, as well as the effect of wind data resolution on the simulation of long-term waves.     

2D and 3D coexisting modes of thermal convection in fractured hydrothermal systems - Implications for transboundary flow in the Lower Yarmouk Gorge

Numerical investigations of 2D and 3D modes of large-scale convection in faulted aquifers are presented with the aim to infer possible transport mechanisms supporting the formation of thermal springs through fractured aquicludes. The transient finite elements models are based on idealized structural features that can characterize many hydrothermal systems. The sensitivity analysis of the fault permeability showed that faults cross-cutting the main regional flow direction allow groundwater to be driven laterally by convective forces within the fault planes. Therein thermal waters can either discharge along the fault traces or exit the fault through adjacent permeable aquifers. In the latter case, the resulting flow is helicoidally and transient. The location and the spacing between discharge areas can migrate with time, is not strictly constrained to the damage zones and reflects the wavelength of the multicellular regime in the fault zone.An illustrative example based on simplified structural data of the Lower Yarmouk Gorge (LYG) is presented. The numerical calculations indicate that crossing flow paths result from the coexistence of fault convection, developing for example along NE-SW oriented faults within the Gorge, and additional flow fields. The latter are induced either by topography NS gradients, e.g. perpendicular to the major axe of the Gorge, or by local thermal convection in permeable aquifers below the Eocene aquiclude. Sensitivity analysis of fault hydraulic conductivity (K) and the analytical solutions based on viscous-dependent Rayleigh theory show that K values between 2.3e⁻⁷ m/s and 9.3e^{– 7} m/s (i.e. 7 m/yr and 30 m/yr, respectively) favor coexisting transport processes. The uprising thermal plumes spread over several hundred meters forming clusters of springs, in agreement with observation, and which temperature fall within the measured ranges, i.e. 20 °C−60 °C. To some extent the models also reproduced the transient behavior of the spring temperature. Owing to the idealized nature of the presented models, the numerical results and the associated analytical solution can be applied to study the onset of thermal convection and resulting flow patterns of any fractured hydrothermal basin.     

辐射沙脊主要水道的演变特征及其水动力机制研究

近四十年来的水下地形资料对比显示：南黄海辐射沙洲区水道普遍存在逐渐向南偏移的趋势（西洋主槽冲深、南延,南翼烂沙洋水道、小庙洪水道向南逼进）。有关辐射沙洲整体南移的原因及机理虽有诸多猜想,但至今没有统一可靠的认识,这种趋势性过程的驱动力成为辐射沙洲区海岸冲淤动态研究及港口建设过程中亟待解决的问题。在恢复黄河北归以来苏北黄河三角洲海岸不同发育阶段的岸线位置和水下地形的基础之上,通过所建立的潮波数学模型,研究了在苏北黄河三角洲不同演变阶段南黄海潮波系统的特征及水动力变化。研究表明,随着岸线后退和水下三角洲的夷平,辐射沙洲地区潮差不断增大;水动力不断加强,而且加强的区域逐渐向南偏移,这种大范围区域性水动力主轴的向南偏移就有可能是导致辐射沙洲整体南移的主导因素之一。     

综合多信息进行地震约束储层随机建模——以准噶尔盆地庄1井区J1S2^2砂组为例

针对地震约束储层随机建模中地震反演波阻抗数据体与岩相概率关系差的问题,提出综合多信息、逐级约束、多级建模的思路方法。首先以地震反演数据体约束建立地球物理特征曲线随机参数场,再以每一个地球物理特征曲线参数场为约束建立相模型,最后以优选的相模型和地球物理特征曲线参数场为约束进行储层参数建模。该方法在井距较大的开发前期评价阶段具有较好的应用效果。     

Numerical Simulation of Large Diameter Cylindrical Structure Slamming

The water entry of large diameter cylindrical structure is studied by applying numerical simulation method. The processes of different diameter cyhndrical structures impacting water with various constant velocities are calculated numerically. Thereafter, analyzed are the distribution of slamming pressure on structure during slamming course and the influence of slamming velocity and cylindrical diameter on slamming process. Furthermore, presented herein is an equation being used to forecast the peak slamming force on a large diameter cylindrical structure.