三参数小波及其在地震资料分析中的应用

提出了一类含有三个可调参数的分析小波（称为三参数小波）,通过选择这三个参数,可使其最适合于所给定的问题．Morlet小波及改进的Morlet小波是其特例．通过对三参数小波中的参数加以约束,可以获得一类新的近似解析小波．论证了通过恰当的选择参数,三参数小波不仅适合于分析包含慢变频率和振幅分量的信号,而且也适合于包含快变分量的信号．以三参数小波为分析小波,提出了一种用于薄互层地震资料分析的方法．该方法能够刻画薄互层的沉积旋回,也能研究薄互层内部的局部结构,并采用模型资料验证了方法的有效性．     

青藏高原东北缘地壳三维速度结构

本文用1980—2000年M≥1.5的2 032个天然地震事件的38 052个〖AKP-〗、〖AKS-〗、Pm、Sm、Pn和Sn震相到时及人工地震测深给出的Moho面形态资料,利用地震层析技术反演了32°~40°N, 100°~108°E区域内地壳地震波速度结构.从层析成像图象中可以得到,本区的地壳可分成4个层位.第1层（埋深约在0~3 km）为沉积层, 速度梯度约为0.2 s-1;第2层（埋深约在3~17 km）为上地壳, 其顶部速度梯度约为0.1 s-1, 下部速度横向变化较大且存在低速块体;第3层（埋深约在17~36 km）为中地壳, 速度梯度约为0.03 s-1;第4层（埋深约在36 km—Moho）为下地壳, 是一个契形层,总的趋势是西厚东薄,青藏高原较厚逐渐向鄂尔多斯地块和扬子准地台方向变薄,各处的地震波速度梯度不尽相同.     

郯庐断裂带安徽段现代地震活动及应力场特征

分析了郯庐断裂带安徽段地震活动特征,利用近震直达波最大振幅比方法反演了99次中-小地震震源机制,并作了统计和聚类分析。现代地震活动整体上继承了历史地震分布格局,未显示增强趋势;断裂带及邻区应力场P轴和T轴优势方位大致呈近东西向和近南北向分布,现今承受的作用力以近水平或斜向为主,但也存在部分其它方向的应力场和近垂直方向的作用力。震源断层的破裂类型,带内以逆冲(或正断),或近逆冲(或正断)型为主。带附近较明显地呈现出走滑型或近走滑型破裂的优势;北、南亚段应力场有明显差异,即北压南张,其分界大约在北纬32°附近,北西西走向的桥头集—东关断裂是两者间的构造变换带。     

渤海南部碎屑石英表面微结构特征等沉积环境

运用扫描电镜研究渤海南部碎屑石英颗粒表面微结构,并根据各种形痕的组合特征,判断沉积物所处的沉积环境,定性分析控制沉积环境的主要因素。     

Seismic stratigraphy and subsidence analysis of the southern Brazilian margin (Campos,Santos and Pelotas basins)

The Campos, Santos and Pelotas basins have been investigated in terms of 2D seismo-stratigraphy and subsidence. The processes controlling accommodation space (e.g. eustacy, subsidence, sediment input) and the evolution of the three basins are discussed. Depositional seismic sequences in the syn-rift Barremian to the drift Holocene basin fill have been identified. In addition, the subsidence/uplift history has been numerically modeled including (i) sediment flux, (ii) sedimentary basin framework, (iii) relation to plate-tectonic reconfigurations, and (iv) mechanism of crustal extension. Although the initial rift development of the three basins is very similar, basin architecture, sedimentary infill and distribution differ considerably during the syn-rift sag to the drift basin stages. After widespread late Aptian–early Albian salt and carbonate deposition, shelf retrogradation dominated in the Campos Basin, whereas shelf progradation occurred in the Santos Basin. In the Tertiary, these basin fill styles were reversed: since the Paleogene, shelf progradation in the Campos Basin contrasts with overall retrogradation in the Santos Basin. In contrast, long-term Cretaceous–Paleogene shelf retrogradation and intense Neogene progradation characterize the Pelotas Basin. Its specific basin fill and architecture mainly resulted from the absence of salt deposition and deformation. These temporally and spatially varying successions were controlled by specific long-term subsidence/uplift trends. Onshore and offshore tectonism in the Campos and Santos basins affected the sediment flux history, distribution of the main depocenters and occurrence of hydrocarbon stratigraphic–structural traps. This is highlighted by the exhumation and erosion of the Serra do Mar, Serra da Mantiqueira and Ponta Grossa Arch in the hinterland, as well as salt tectonics in the offshore domain. The Pelotas Basin was less affected by changes in structural regimes until the Eocene, when the Andean orogeny caused uplift of the source areas. Flexural loading largely controlled its development and potential hydrocarbon traps are mainly stratigraphic.     

Tectonically-driven mud volcanism since the late Pliocene on the Calabrian accretionary prism,central Mediterranean Sea

Mud volcanoes recently discovered on the offshore Calabrian Arc are investigated at two sites 60 km apart, in water depths of 1650--2300 m, using swath bathymetry, 2D&3D multichannel seismic and cores. The seabed and subsurface data provide information on their formation and functioning in relation to tectonic activity during the rapid Plio-Quaternary advance of the accretionary prism. Fore-arc extension and thrust-belt compression are seen to have involved two main phases of activity, separated by a regional unconformity recording a mid-Pliocene (3.5–3.0 Ma) tectonic reorganization. The two sites of mud volcanism lie in contrasting tectonic settings (inner fore-arc basin vs central fold-and-thrust belt) and record differing forms of seabed extrusive activity (twin mud cones and a caldera vs a broad mud pie). At both sites, subsurface data show that mud volcanism took place throughout the second tectonic phase, since the late Pliocene; differing forms of mud extrusion were accompanied by subsidence to form depressions beneath and within extrusive edifices up to 1.5 km thick. The basal subsidence depressions point to sources within the succession of thrusts underlying the inner to central Arc, consistent with microfossils within cored mud breccias from both sites that are derived from strata as old as Late Cretaceous.     

1992年美国加州兰德斯地震——地壳结构不均匀性对地震发生的影响

为了理解地震的发生和地壳结构不均匀性的关系,利用南加州地震台网的固定台和临时台所记录的2863个兰德斯余震和区域地震,共计107401个P波和19624个S波高质量的到时数据,采用地震层析成像方法得到了兰德斯地震区P波和S波的精细的三维速度结构和泊松比分布．结果显示,地震的发生和分布与地壳结构的横向不均匀性有密切的关系．总体上看,兰德斯地震区余震成丛分布,并被低速块体截断,其中4级以上地震大多分布于P波高、低速异常过渡区域或偏向高速块体一侧,这可能是因为高速区多属地壳脆性介质,易于造成应力集中,导致地震;反之,低速度区则可能代表破碎程度较高、富含流体或温度较高区域,因而更倾向于产生无震变形．基于兰德斯地震区强震震源位置、地震区P波、S波速度异常与泊松比分布推断,兰德斯地震区可能有流体存在．地壳流体易使地壳岩石弱化,从而引发大地震．     

有限元方法在地震孕育过程与前兆机理研究中的应用进展

有限元方法的基本思想是将连续的求解区域离散为一组有限个、 且按一定方式相互联结在一起的单元的组合体。 有限元方法是目前应用最为广泛的数值模拟方法, 由于能够将复杂介质的力学本构关系及边界条件问题转化成为常规问题的计算程序, 所以越来越多的地震学者将其应用于地震成因与前兆机理研究中。 该文着重介绍了有限元数值分析方法及其模拟在地震孕育过程与前兆机理研究中的应用进展, 并提出开展小尺度规模如岩石中矿物颗粒之间的力学行为的有限元模拟研究等几点建议。     

模拟地震波传播的三维逐元并行谱元法

高效地震波场正演模拟对于复杂模型中地震波传播与成像研究至关重要.本文在谱元法原理框架内,对已有逐元谱元法改进,提出一种新的逐元并行谱元法求解三维地震波运动方程,并得到地震波场.逐元并行谱元法的核心思想在于在单元上进行质量矩阵与解向量的乘积运算,并将此运算平均分配至每一个CPU计算核心,此处理有利提升谱元法的并行计算效率...     

Assessment of seismic hazard for the Sannio-Matese area of Southern Italy — A summary

The working group on Test Regions for Evaluation of Methods for Seismic Hazard Assessment in Europe (TERESA), consisted of 15 members from 10 different European countries. Methods and experience gathered in these countries have been compared and discussed for two test areas in Europe: the Sannio-Matese region, Southern Italy, with high seismic activity, and the border region between Belgium, The Netherlands, and Federal Republic of Germany, with low activity.This paper summarizes the results for one of the test areas, Sannio-Matese. Most of the participants used statistical procedures to assess earthquake hazard, receiving results in terms of probability of occurrence for intensity as the ground-motion parameter. It was found that careful preparation of input data and parameters is the major influencing factor, therefore most of the efforts of the working group was devoted to this task.The scatter of the obtained results of the group is considerable, mainly because of the uncertainties in the data and the subjectiveness involved in the procedures. For better control of both factors, more objective methods have to be developed.