西藏当雄6．6级地震应急行动及灾害特征

2008年10月6日西藏当雄县发生了6．6级地震。震后,各级政府和地震部门迅速启动了地震应急预案,周密安排和部署地震应急处置与救灾行动。简要介绍了当雄6．6级地震的应急行动和灾害特征,提出了减轻地震灾害、提高地震应急能力应注意的几个问题。     

单台地震观测报告震相数据的验证方法探讨

简要介绍了利用电子走时表和网上地震目录对单台地震观测报告的震相数据进行初步检查的方法及其软件实现,认为,利用该方法可找出观测报告中分析错误和误差较大的震相,可作为一种对单台地震观测报告进行检查的有效方法。     

2008年3月21日新疆于田7.3级地震发震构造与震前地震活动特征研究

2008年3月21日新疆于田发生7.3级地震,打破了中国大陆6年多的7级地震平静,成为我国近期较为显著的一次地震事件.综合分析MS≥4.0余震分布、震区断裂性质以及等震线长轴方向等资料,认为郭扎错断裂是这次地震的发震构造;据Harvard震源机制解分析,这次地震是在近NS向力的作用下,郭扎错断裂发生略带走滑分量的拉张破裂所致.通过地震前震区附近地震活动特征分析发现,于田地震发生在1996年以来新疆南部及邻区7级地震有序分布的空段;震前震区附近有4级地震空区形成,空区持续91个月后发生了2006年9月12日皮山5.8级"信号震",其后1.5年发生于田7.3级地震.     

科里奥利力对断层作用的统计研究

首先给出了分解到已知断层面法向和切向上的断层错动科里奥利应力(简称为科里奥利法向应力和切向应力)表达式,然后从哈佛大学矩心矩张量目录中选取主余震资料进行分析,按断层分类研究了科里奥利法向应力和主震震级与其最大余震震级差及主震地震矩与余震地震矩总和之差的折合矩震级间的关系.研究结果显示:地震断层错动过程中虽然产生了使断层两盘相互拉离(或挤压)的科里奥利法向应力,它降低(或增加)了断层错动时断层面上的摩擦阻力,但是应力量值太小(科里奥利法向应力估计最大不到0.1MPa,即不到一个大气压),不足以对断层错动及主震能量释放产生影响,从而影响余震的最大震级和总体水平.     

Local amplification of deep mining induced vibrations Part 1: Experimental evidence for site effects in a coal basin

The work presented in this paper lies under the scope of a research program aiming to assess the impact of deep coal mining induced vibrations on the surface constructions. The concerned section of the program is dedicated to the study of geological site effects and their influence on the mining induced vibrations for which the experimental investigations have been carried out and developed in this paper (Part 1). The empirical methods based on H/V spectral ratios have been applied on data sets provided from mining induced vibrations recorded within private residences above the deep coalmine as well as complementary measurements of ambient noise. The results evidence an amplified zone in the southern part of the Gardanne basin where drilling data confirmed the presence of particularly fractured and soft stratigraphic units. This joint analysis of induced seismicity and ambient noise enabled to validate the method based on H/V ratios applied to the mining context.     

Seismic response of an urban bridge-support system in soft clay

The numerical simulation of an instrumented urban bridge support and its foundation system was conducted. The bridge works as a deck in a surface subway station and was built 12 yr ago in the so-called Lake Zone in Mexico City, where very soft clays, exhibiting low shear strength and high compressibility prevail. Since the beginning of its construction, pile loads, soil–raft contact pressures and the overall response of the foundation system have been monitored. Within this period, several earthquakes have occurred. Thus, an extensive database of accelerations, pore pressures and load histories have been recorded. In particular, this paper focuses on the bridge response observed during two moderated intensity events, the 2004, 6.3 M_w, Guerrero Coast and the 1999, 7.0 M_w, Tehuacan earthquakes. Finite element models were developed to reproduce the measured responses and to assess the soil–foundation-support performance for long-term conditions, including the effects of potential changes in the dynamic soil properties due to regional subsidence. The computed dynamic responses obtained with the simulation for the free field and structure compares fairly well with the recordings.     

Estimation of strong seismic ground motion for engineering use in Perth Western Australia

Probabilistic seismic hazard analysis (PSHA) was performed to determine two alternate magnitude-distance combinations for the 475 yr event, and the worst-case scenario event in Perth, Western Australia. Regional strong ground motion (SGM) time histories on rock sites are used to modify an eastern North America (ENA) seismic model to suit southwest Western Australian (SWWA) conditions. This model is then used to stochastically simulate a set of 475 yr design events and a set of worst-case scenario event for rock sites in the Perth metropolitan area (PMA). The simulated time histories are then used as input to typical soft soil sites in the PMA to estimate surface ground motions. The spectral accelerations of the ground motions on rock and soil sites are calculated and compared with the corresponding design spectra defined in current and previous Australian earthquake loading code. Discussions of the adequacy of the code spectra and the differences to ours, along with implications on structural response and damage are made.     

Influence of plasticity on the seismic soil–micropiles–structure interaction

This paper includes an analysis of the influence of soil plasticity on the seismic response of micropiles. Analysis is carried out using a global three-dimensional modeling in the time domain. The soil behavior is described using the non-associated Mohr–Coulomb criterion. Both the micropiles and the superstructure are modeled as three-dimensional beam elements. Proper boundary conditions are used to ensure waves transmission through the lateral boundaries of the soil mass. Analyses are first conducted for harmonic loadings and then for real earthquake records. They show that plasticity could have a significant influence on the seismic response of the soil–micropiles–structure systems. This influence depends on the amplitude of the seismic loading and the dominant frequencies of both the input motion and the soil–piles–structure system.     

Travel distance of failed slopes during 2004 Chuetsu earthquake and its evaluation in terms of energy

A number of slope failures during the 2004 Niigataken Chuetsu earthquake were investigated, revealing that the travel distance becomes longer as the slope gets gentler and the failed soil mass gets larger. An energy-based approach, proposed in previous research to evaluate the travel distance of failed slopes, is modified by adding the model test results and introducing a simple evaluation method. The energy approach is then applied to a number of slopes failed during the earthquake to back-calculate mobilized friction coefficients, revealing their strong dependency on initial slope inclinations. The friction coefficient was found to be smaller than the initial slope inclination for gentler slopes, indicating that the failed soil mass tends to accelerate. In contrast, that for steeper slopes was higher than initial slope inclination. The friction coefficient was found to decrease with increasing volume of failed slope, which is quite consistent with previous case studies including large non-seismic landslides.     

A new definition of strong motion duration and related parameters affecting the response of medium–long period structures

This study presents a new definition of the strong motion duration combining the alternative bracketed and significant duration definitions. Based on the time integral of the absolute ground velocity, a new index is defined, as cumulative absolute displacement (CAD), and used to estimate the strong motion duration. The proposed bracketed-significant duration t_bs is found to be well correlated with the strong motion part of the records, especially in the case of near-source events. The duration t_bs and the CAD index are used to assess the anticipated structural behavior of medium–long period structures.