4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.     

Nature of the connection between the Northern and Southern Zechstein Basins across the Mid North Sea High

The seismic expression of a salt-filled channel which cuts across the Mid North Sea High in Quadrant 37 is described, with features interpreted as being produced by salt-edge dissolution forming both eastern and western margins of the channel. The apparent half-graben nature of the channel is shown to be only superficial, and due to complex faulting associated with, but not defining, its western margin. The shallower faulting here is a Mesozoic to early Tertiary growth fault related to local dissolution of Zechstein salt. The dissolution effect appears in turn to have been localized by the presence of a deeper fault that was already downthrown to the east in Zechstein times, when it seems to have limited the eastward progradation of Zechstein shelf carbonates and anhydrites, and had probably ceased to move significantly before the onset of the Late Cimmerian erosional phase. The origin of this arcuate fault is tentatively ascribed to subsidence around a granite batholith. Zechstein salt originally spread some distance to the east and west of the channel; it was dissolved from the edges inwards, mainly before the Late Cretaceous, giving rise to a thicker Mesozoic sequence on parts of the flanks of the channel than in the middle. Besides providing an interesting structural case history, the features described have implications regarding Zechstein sedimentation, reservoir potential, the tectonic history of the North Sea, and the nature of the Mid North Sea High itself.     

Stability of waterfront retaining wall subjected to pseudo-static earthquake forces

Waterfront retaining walls supporting dry backfill are subjected to hydrostatic pressure on upstream face and earth pressure on the downstream face. Under seismic conditions, if such a wall retains a submerged backfill, additional hydrodynamic pressures are generated. This paper pertains to a study in which the effect of earthquakes along with the hydrodynamic pressure including inertial forces on such a retaining wall is observed. The hydrodynamic pressure is calculated using Westergaard's approach, while the earth pressure is calculated using Mononobe-Okabe's pseudo-static analysis. It is observed that when the horizontal seismic acceleration coefficient is increased from 0 to 0.2, there is a 57% decrease in the factor of safety of the retaining wall in sliding mode. For investigating the effect of different parameters, a parametric study is also done. It is observed that if φ is increased from 30° to 35°, there is an increase in the factor of safety in the sliding mode by 20.4%. Similar observations were made for other parameters as well. Comparison of results obtained from the present approach with [Ebeling, R.M., Morrison Jr, E.E., 1992. The seismic design of waterfront retaining structures. US Army Technical Report ITL-92-11. Washington DC] reveal that the factor of safety for static condition (k_h=0), calculated by both the approaches, is 1.60 while for an earthquake with k_h=0.2, they differ by 22.5% due to the consideration of wall inertia in the present study.     

断阶型潜山带地质模型的建立及储层预测--以CG20潜山为例

以 CG2 0潜山为例 ,从建立地质模型入手 ,包括地层模型、构造模型、储集模型、储盖组合模型、速度模型等 ,认识到各套地层分布和储层物性的差异均与地震响应密切相关 ,因此可以利用地震波的信息 ,预测潜山储层的发育及分布情况。在对 CG2 0潜山进行精细全三维构造解释的基础上 ,探讨性地应用了测井约束反演、吸收系数、相干分析及三维模式识别等技术 ,对潜山储层进行了预测 ,从而提高了潜山勘探的效益 ,并为类似断阶型潜山带的勘探提供了成功的经验 ,具有一定的指导意义。     

Geodynamic Evolution of the Eastern Segment of the Azores-Gibraltar Zone: The Gorringe Bank and the Gulf of Cadiz Region

Detailed structural interpretation of the recently acquired deep seismic multichannel profiles along the Iberian Atlantic Margins (IAM Project) provides new results on the geodynamic evolution of the eastern part of the Azores-Gibraltar plate boundary. Thrusting and folding of the oceanic basement and of Mesozoic and Cenozoic sedimentary cover of the Gorringe Bank region are consistent with the N–S convergence of Iberia and Africa. Compressive structures in the Gorringe Bank region are spread over a wide area. Deformation under compression took place mainly in Tertiary times, as is evidenced by a basal unconformity and several discontinuities in Tertiary sediments, although some deformation has also been recorded in Quaternary sediments. The compressive structures in the Gulf of Cadiz are E–W oriented thrusts, folds and related diapiric structures. N–S oriented transpressive deformation is likely to occur in the western Portuguese platform. There is no continuity of structures from the oceanic to the continental domain, suggesting that deformation transfers from one side to the other through a transcurrent fault zone. The fault contact between the two domains is located in the ocean-continent transition zone.     

Facies recognition of some Tertiary coals applied to prediction of oil source rock occurrence

Coals are oil source rocks in many of the Tertiary basins of Southeast Asia. The precursors of these hydrogen rich and oxygen poor coals are coastal plain peats which have mainly developed in an everwet and tropical climate. In these environments water flow and reworking can concentrate liptinitic kerogen in preference to vitrinitic kerogen. The distribution, petrography and chemistry of the coaly Miocene source rocks present in the Kutai Basin are described. The recognition of environmental controls on the accumulation of potentially oil-prone coals and coaly shales in deltaic environments is an aid to predictive source bed recognition in petroleum exploration. Comments on the environment of deposition of coaly sediments in the basins of the Norwegian Sea are discussed with reference to their possible oil and/or gas sourcing potential. The Triassic - Jurassic coals of the Haltenbanken area may become more oil-prone towards the delta margins, and facies mapping could aid oil exploration in this area.     

海洋天然气水合物的地震识别方法研究

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。     

滇西地区地壳上地幔电性结构与地壳构造活动的关系

本文根据滇西地区18个大地电磁测深点资料的数据处理和分析结果,对测区深部导电率在纵、横向上的变化特征进行了研究。结果表明:滇西地区深部电性为多层结构,大致可分四至五个电性结构层;深部电性结构横向变化大,明显受区域构造控制;该区上部地壳内普遍存在低阻层;上地幔高导层明显存在两个隆起区,一个以剑川—鹤庆为中心呈北北西向展布的隆起区,另一个以腾冲—潞西为轴呈南北向展布的隆起区。 本文还讨论了地壳上地幔电性结构与大地构造的关系,滇西北裂陷区盆地的形成,以及该区地震活动与深部构造的关系     

基于RS与GIS技术的变更图斑自动识别方法研究

基于RS与GIS技术的土地利用变更图斑自动识别方法,即"以遥感正射影像图为基础,以地理信息和地物反射光谱为判别依据"的变更信息识别方法,能够尽量避免传统利用遥感影像分类技术进行地物变更识别存在的不足。本文通过对距离算法的改良,有效利用遥感数据的实时性和丰富性,在地理信息系统的支持下,提高了对地物变更地块的识别精度。     

Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.