营养盐水平对四种海洋浮游硅藻胞外多糖产量的影响

4种海洋浮游硅藻(牟勒氏角毛藻、海链藻、三角褐指藻和新月菱形藻)培养在改进的f／2培养基中，研究了不同氮、磷和硅营养水平对它们胞外多糖产量的影响．结果表明，硅藻胞外多糖的生产和释放具有种间特异性，角毛藻和海链藻胞外多糖的生产和释放主要在静止期，而三角褐指藻和新月菱形藻在指数生长期前期和静止期都能生产和分泌较高的胞外多糖；培养液中低浓度磷减少了4种硅藻在静止期胞外多糖的产量，但增加了角毛藻在生长期前期胞外多糖的产量；氮浓度的降低增加了三角褐指藻在指数生长前期胞外多糖的产量，但减少了其他3种藻类胞外多糖的产量；硅浓度的降低对4种硅藻胞外多糖的产量影响不大，在一定程度上还促进了静止期胞外多糖的生产．本研究表明，营养盐水平对硅藻胞外多糖生产的影响因种类和细胞所处生长期不同而存在着很大的差异．     

滇西地区地壳上地幔电性结构与地壳构造活动的关系

本文根据滇西地区18个大地电磁测深点资料的数据处理和分析结果,对测区深部导电率在纵、横向上的变化特征进行了研究。结果表明:滇西地区深部电性为多层结构,大致可分四至五个电性结构层;深部电性结构横向变化大,明显受区域构造控制;该区上部地壳内普遍存在低阻层;上地幔高导层明显存在两个隆起区,一个以剑川—鹤庆为中心呈北北西向展布的隆起区,另一个以腾冲—潞西为轴呈南北向展布的隆起区。 本文还讨论了地壳上地幔电性结构与大地构造的关系,滇西北裂陷区盆地的形成,以及该区地震活动与深部构造的关系     

Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.     

Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.     

基于最小二乘配置的三维空间坐标转换

在求解未知转换参数时,鉴于公共点坐标本身的误差,提出利用最小二乘配置法进行空间坐标转换,即将公共点本身坐标作为随机参数,把转换参数作为非随机参数进行处理,最后通过实验对比分析表明,该方法明显优于一般坐标转换方法。     

渤海GNSS-R机载测风试验及其反演结果

对渤海GNSS-R机载试验进行了海面风场反演.结果表明,风速精度优于1 m/s,风向精度优于20°.     

某基坑工程土钉支护工作性状试验研究

通过对广州天河荟雅苑基坑工程土钉支护进行试验和研究,分析了土钉支护体系的工作性状,并为同类工程的设计提供了一定的依据。     

Hybrid seismic modeling based on discrete-wave number and finite-difference methods

Any calculation of seismic wave propagation comprising the seismic source, the travel path, and the receiver site in a single finite-difference (FD) model requires a considerable amount of computer time and memory. Moreover, the methods currently available for including point sources in the 2D FD calculations are far-field approximations only. Therefore we have developed a new hybrid method for treating the seismic wave fields at localized 2D near-surface structures embedded in a 1D background medium, and excited by a point source. The source radiation and propagation in the background model is solved by the discrete-wave number (DW) method, while the propagation in the local 2D structure is calculated by the FD method. The coupling between the two sets of calculations is performed on a rectangular excitation box surrounding the local structure. We show the usefulness of the method in ground-motion studies where both near-field source effects and local site effects are important. Technical problems connected with the inconsistency between the 3D source radiation and the 2D FD calculation are minor for the relatively distant in-plane point explosive sources, but are more serious for the in-plane dislocation sources.     

中强地震前后能量分布的自仿射特性

根据简化的地震波传播理论,“漫化”地震能量在空间的分配,减弱能量空间分布概率的极端情形及消除统计域为“空”的情形,由此构造类似于二维ｆＢｍ的地震能量空间分布概率曲面。与起伏不平的地形相似,由于基在水平方向及垂直方向的变化不是等比例的,因而这一分形曲面可能是统计自仿射的。