Calculating Pollution Indices by Heavy Metals in Ecological Geochemistry Assessment and a Case Study in Parks of Beijing

Pollution index is a powerful tool for ecological geochemistry assessment. The commonly used pollution indices by heavy metals in soils and sediments were classified as two types of single index and integrated index in an algorithm point of view. Four single indices of contamination factor (or concentration factor), ecological risk factor, enrichment factor, and index of geo-accumulation were illustrated, and the reference values for calculating single indices were distinguished into background levels and threshold pollution values. Eight integrated indices were divided into two groups. One group is suitable for the normal distribution single indices including the sum, average, weighted average,vector modulus, and Nemerow pollution indices, and the other for log-normal distribution including the product, root of product, and weighted power product pollution indices. Using background levels as reference values, five contamination classes were divided, and the terminologies are suggested for the single and integrated indices to unify the assessment results. Software of EGAPI was developed in a single document interface to calculate the four single and eight integrated indices by heavy metals to assess the quality of soil and sediment ecological geochemistry. Pollution indices by heavy metals of Cu,Pb, and Zn in soils in parks of Beijing were calculated using EGAPI software, and these five contamination classes and terminologies suggested in this study were evaluated and used. Results ofintegrated indices of Cu, Pb, and Zn in soils indicated that the soil qualities are unpolluted as a whole and varied from low polluted to unpolluted status from the center to the outskirts of Beijing City.     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

Impact of the tsunami and earthquake of 26th December 2004 on the vital coastal ecosystems of the Andaman and Nicobar Islands assessed using RESOURCESAT AWiFS data

Tsunami waves struck the Indian coast on 26th December 2004 affecting the Andaman and Nicobar group of islands. A quick assessment of the status of the vital coastal ecosystems has been made using pre- and post-tsunami Advance Wide Field Sensor (AWiFS) data of Indian satellite RESOURCESAT with an accuracy of 87–90% and the Kappa ranging from 0.8696 to 0.9053. Among the coastal ecosystems the coral reefs have suffered the maximum with the Nicobar reefs (69% eroded and 29% degraded) bearing the brunt more than the Andaman reefs (54% eroded and 22% degraded). Significant improvement to the condition of the reef damaged due to backwash has been noted. About 41% of the Sentinel reef area has undergone significant improvement. The continuance of the erosion of the southwestern Andaman reefs is due to the impact of recurring earthquakes. The impact on mangroves of both the groups of islands has been due to uprooting as well as inundation of seawater and resulting stagnation. Changes are expected in community structure of mangroves as a result of tsunami.     

Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.     

基于高分辨率遥感数据的城市居住单元交通环境质量评价——以厦门市为例

居住单元是与人们生活密切相关的社区范围,其交通环境的优劣是衡量居住单元环境好坏的重要标准之一。高分辨遥感影像 的高空间分辨率特点为我们提供了研究居住单元交通环境的可能性。本文从区域交通环境、路网可达性出发,对城市居住单元交通 环境质量的遥感评价方法进行了研究,根据高分辨率遥感影像的特点构建了居住单元交通环境的多级指标评价体系,并对厦门市的 50个居住单元进行了评价分析。实验表明,利用高分辨率影像进行城市交通环境质量评价是一种成本较低,简便可行的方法。     

区域地质灾害危害程度等级划分探讨

区域性地质灾害危害程度等级尚无比较科学的划分方法。通过福建省区域地质灾害危害程度等级划分的探讨,采用单位面积地质灾害造成的人员死亡数、财产损失值作为“地质灾害模数”,对区域地质灾害危害程度等级进行划分,判别不同区域地质灾害严重程度,为区域地质灾害防治决策提供科学依据。     

山区房后边坡安全评价的探讨——以安溪县为例

由于地质灾害的突发性和引发因素的复杂性,在及时和有效地掌握潜在隐患部位上还亟待进一步探索与细化,力求防灾抗灾工作有的放矢,以确保人民群众的生命财产损失降到最低限度。本文就基于山区的基本特征和房后边坡潜在地质安全隐患基本信息调查,简要分析房后边坡孕灾致灾环境,并针对它们的影响程度,采取层次分析（AHP）等方法来确定安全评价因子权重和安全系数,对构造安全评价结构作进一步研究。     

北武夷地区逆冲推覆构造的特征及其控矿作用

北武夷地区成矿地质条件优越,矿产资源分布广泛,而广泛发育的推覆构造深刻影响着矿床的成生与保存。区域性推覆构造是成矿前、成矿期还是成矿后的构造,其精细结构特征如何,是否具有控岩控矿作用,如果是破矿作用,是否造成矿体重复增大或者隐伏、缺失等问题,严重影响着地质找矿的效果。建议开展面积性、追索性的路线地质调查,查明逆冲推覆构造的区域分布、不同单元的产状、构造样式,分别采用40Ar-39Ar和Re-Os定年技术测定推覆构造和矿体的形成时代,结合定量化分析及精细构造解析,研究构造与矿床的成生联系,预测隐伏矿体可能的位置,进而为北武夷地区寻找隐伏矿床和扩大矿床远景提供参考。     

中国海相探矿权区块定量评价方法

在研究了我国海相油气探矿权区块基本油气地质条件、勘探程度、技术经济条件等要素和特点的基础上,给出了48个评价参数和归一化取值参照表,建立了探矿权区块评价工作流程、评分参数及计算公式。提出对我国海相勘探层探矿权区块评价应该注意:与国外海相碳酸盐岩评价的差别;与国内陆相碎屑岩评价的差别;成藏组合的划分;评价内容的有效性、不确定性和评价参数的可信度;成败经验的总结和勘探程度的研究。     

靖远矿区采煤沉陷区复垦综合评价方法研究

以靖远矿区为例,从土地复垦和恢复生态学的角度出发,建立了靖远矿区采煤沉陷区复垦综合评价系统,选择土壤条件（土层厚度、土壤质地、有机质含量、土壤水分）、地形改造条件（地面坡度、地表破坏程度、改造难易程度）、气候及水文条件（年降雨量、灌溉条件）作为分类及评价因子对复垦潜力进行评价。将采煤沉陷地分为四种潜力区,对每种潜力类型区的复垦开发利用方向进行了优化设计,从理论上和实践上对靖远矿区采煤沉陷地的复垦能力以及复垦过程中用地结构的优化作了探讨,以期对当地沉陷地的复垦提供一定的科学依据。