Structural elements of the Makran region, Oman sea and their potential relevance to tsunamigenisis

The character of convergence along the Arabian–Iranian plate boundary changes radically eastward from the Zagros ranges to the Makran region. This appears to be due to collision of continental crust in the west, in contrast to subduction of oceanic crust in the east. The Makran subduction zone with a length of about 900 km display progressively older and highly deformed sedimentary units northward from the coast, together with an increase in elevation of the ranges. North of the Makran ranges are large subsiding basins, flanked to the north by active volcanoes. Based on 2D seismic reflection data obtained in this study, the main structural provinces and elements in the Gulf of Oman include: (i) the structural elements on the northeastern part of the Arabian Plate and, (ii) the Offshore Makran Accretionary Complex. Based on detailed analysis of these data on the northeastern part of the Arabian Plate five structural provinces and elements—the Musendam High, the Musendam Peneplain, the Musendam Slope, the Dibba Zone, and the Abyssal Plain have been identified. Further, the Offshore Makran Accretionary Complex shown is to consist Accretionary Prism and the For-Arc Basin, while the Accretionary Prism has been subdivided into the Accretionary Wedge and the Accreted/Colored Mélange. Lastly, it is important to note that the Makran subduction zone lacks the trench. The identification of these structural elements should help in better understanding the seismicity of the Makran region in general and the subduction zone in particular. The 1945 magnitude 8.1 tsunamigenic earthquake of the Makran and some other historical events are illustrative of the coastal region’s vulnerability to future tsunami in the area, and such data should be of value to the developing Indian Ocean Tsunami Warning System.     

黑龙江省金厂金矿床J0矿体流体地球化学研究

黑龙江省东宁县金厂金矿床是最新发现的特大型金矿床,目前探获黄金资源量86吨,它位于中亚造山带东端的吉黑成矿带,是与中生代中酸性岩浆活动有关的复杂成矿系统,矿化类型可能包括了斑岩型、爆破角砾岩型、浅成低温热液型.研究表明,高丽沟J0号矿体为爆破角砾岩型,热液成矿过程经历了早、中、晚3个阶段,分别形成以石英-黄铁矿、多金属硫化物-石英和碳酸盐为代表的矿物组合,中阶段矿物含自然金最多,次为早阶段矿物.初始成矿流体系统为高温、高盐度、高氧逸度、富CO2的岩浆热液;经减压沸腾,CO2等挥发分大量逸出,流体温度、盐度和氧逸度下降,导致大量金属硫化物及自然金快速沉淀;大气降水混入导致晚阶段流体低温、低盐度、贫CO2,对成矿贡献甚微.总体而言,成矿流体盐度高(11.70%～37.81%NaCl.eq),成矿作用发生在中-高温(238.3～425.7℃)的浅成环境(深633m～2736m).岩浆-流体成矿系统富CO2应发育于大陆碰撞造山带的伸展构造背景,而非大洋板块俯冲诱发的岩浆弧背景.     

Application of the Single-Bubble Airgun Technique for OBS-Data Acquisition Across the Jan Mayen Ridge,North Atlantic

A 140 km long wide-angle seismic profile has been acquired by use of 6 Ocean Bottom Seismographs across the Jan Mayen Ridge, North Atlantic. The profile was acquired twice; once with a traditionally tuned standard source and secondly with a somewhat smaller source tuned on the first bubble pulse. Analysis of the frequency content of the data reveals that the single-bubble source within the 10-15 Hz frequency range generates a signal with a level about 5 db above that of the standard source. These differences can partly be related to differences in airgun depth. The higher output level for these frequencies enables the single-bubble source to resolve intra-crustal structures with a higher degree of certainty, when compared to the data acquired by use of the standard source array. The standard source seems to generate slightly more energy for frequencies around 6 Hz, probably due to the use of a large 1200 in/sup3 gun in this array. These low frequencies a re of importance for mapping of lower crustal and upper mantle structures, and it is recommended that this is taken into account when seismic sources for mapping of deep crustal and upper mantle structures are designed.     

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.     

Nature of the connection between the Northern and Southern Zechstein Basins across the Mid North Sea High

The seismic expression of a salt-filled channel which cuts across the Mid North Sea High in Quadrant 37 is described, with features interpreted as being produced by salt-edge dissolution forming both eastern and western margins of the channel. The apparent half-graben nature of the channel is shown to be only superficial, and due to complex faulting associated with, but not defining, its western margin. The shallower faulting here is a Mesozoic to early Tertiary growth fault related to local dissolution of Zechstein salt. The dissolution effect appears in turn to have been localized by the presence of a deeper fault that was already downthrown to the east in Zechstein times, when it seems to have limited the eastward progradation of Zechstein shelf carbonates and anhydrites, and had probably ceased to move significantly before the onset of the Late Cimmerian erosional phase. The origin of this arcuate fault is tentatively ascribed to subsidence around a granite batholith. Zechstein salt originally spread some distance to the east and west of the channel; it was dissolved from the edges inwards, mainly before the Late Cretaceous, giving rise to a thicker Mesozoic sequence on parts of the flanks of the channel than in the middle. Besides providing an interesting structural case history, the features described have implications regarding Zechstein sedimentation, reservoir potential, the tectonic history of the North Sea, and the nature of the Mid North Sea High itself.     

Stability of waterfront retaining wall subjected to pseudo-static earthquake forces

Waterfront retaining walls supporting dry backfill are subjected to hydrostatic pressure on upstream face and earth pressure on the downstream face. Under seismic conditions, if such a wall retains a submerged backfill, additional hydrodynamic pressures are generated. This paper pertains to a study in which the effect of earthquakes along with the hydrodynamic pressure including inertial forces on such a retaining wall is observed. The hydrodynamic pressure is calculated using Westergaard's approach, while the earth pressure is calculated using Mononobe-Okabe's pseudo-static analysis. It is observed that when the horizontal seismic acceleration coefficient is increased from 0 to 0.2, there is a 57% decrease in the factor of safety of the retaining wall in sliding mode. For investigating the effect of different parameters, a parametric study is also done. It is observed that if φ is increased from 30° to 35°, there is an increase in the factor of safety in the sliding mode by 20.4%. Similar observations were made for other parameters as well. Comparison of results obtained from the present approach with [Ebeling, R.M., Morrison Jr, E.E., 1992. The seismic design of waterfront retaining structures. US Army Technical Report ITL-92-11. Washington DC] reveal that the factor of safety for static condition (k_h=0), calculated by both the approaches, is 1.60 while for an earthquake with k_h=0.2, they differ by 22.5% due to the consideration of wall inertia in the present study.     

Geodynamic Evolution of the Eastern Segment of the Azores-Gibraltar Zone: The Gorringe Bank and the Gulf of Cadiz Region

Detailed structural interpretation of the recently acquired deep seismic multichannel profiles along the Iberian Atlantic Margins (IAM Project) provides new results on the geodynamic evolution of the eastern part of the Azores-Gibraltar plate boundary. Thrusting and folding of the oceanic basement and of Mesozoic and Cenozoic sedimentary cover of the Gorringe Bank region are consistent with the N–S convergence of Iberia and Africa. Compressive structures in the Gorringe Bank region are spread over a wide area. Deformation under compression took place mainly in Tertiary times, as is evidenced by a basal unconformity and several discontinuities in Tertiary sediments, although some deformation has also been recorded in Quaternary sediments. The compressive structures in the Gulf of Cadiz are E–W oriented thrusts, folds and related diapiric structures. N–S oriented transpressive deformation is likely to occur in the western Portuguese platform. There is no continuity of structures from the oceanic to the continental domain, suggesting that deformation transfers from one side to the other through a transcurrent fault zone. The fault contact between the two domains is located in the ocean-continent transition zone.     

滇西地区地壳上地幔电性结构与地壳构造活动的关系

本文根据滇西地区18个大地电磁测深点资料的数据处理和分析结果,对测区深部导电率在纵、横向上的变化特征进行了研究。结果表明:滇西地区深部电性为多层结构,大致可分四至五个电性结构层;深部电性结构横向变化大,明显受区域构造控制;该区上部地壳内普遍存在低阻层;上地幔高导层明显存在两个隆起区,一个以剑川—鹤庆为中心呈北北西向展布的隆起区,另一个以腾冲—潞西为轴呈南北向展布的隆起区。 本文还讨论了地壳上地幔电性结构与大地构造的关系,滇西北裂陷区盆地的形成,以及该区地震活动与深部构造的关系     

Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.     

GPS observations of the ionospheric F2-layer behavior during the 20th November 2003 geomagnetic storm over South Korea

The ionospheric F2-layer peak density (NmF2) and its height (hmF2) are of great influence on the shape of the ionospheric electron density profile Ne (h) and may be indicative of other physical processes within the ionosphere, especially those due to geomagnetic storms. Such parameters are often estimated using models such as the semiempirical international reference ionosphere (IRI) models or are measured using moderately priced to expensive instrumentation, such as ionosondes or incoherent scatter radars. Global positioning system (GPS) observations have become a powerful tool for mapping high-resolution ionospheric structures, which can be used to study the ionospheric response to geomagnetic storms. In this paper, we describe how 3-D ionospheric electron density profiles were produced from data of the dense permanent Korean GPS network using the tomography reconstruction technique. These profiles are verified by independent ionosonde data. The responses of GPS-derived parameters at the ionospheric F2-layer to the 20th November 2003 geomagnetic storm over South Korea are investigated. A fairly large increase in the electron density at the F2-layer peak (the NmF2) (positive storm) has been observed during this storm, which is accompanied by a significant uplift in the height of the F2 layer peak (the hmF2). This is confirmed by independent ionosonde observations. We suggest that the F2-layer peak height uplift and NmF2 increase are mainly associated with a strong eastward electric field, and are not associated with the increase of the O/N₂ ratio obtained from the GUVI instruments aboard the TIMED satellite. It is also inferred that the increase in NmF2 is not caused by the changes in neutral composition, but is related to other nonchemical effects, such as dynamical changes of vertical ion motions induced by winds and E × B drifts, tides and waves in the mesosphere/lower thermosphere region, which can be dynamically coupled upward to generate ionospheric perturbations and oscillations.