Mobile sediment in an urbanizing karst aquifer: implications for contaminant transport

 Here we investigate geochemical characteristics of sediment in different compartments of a karst aquifer and demonstrate that mobile sediments in a karst aquifer can exhibit a wide range of properties affecting their contaminant transport potential. Sediment samples were collected from surface streams, sinkholes, caves, wells, and springs of a karst aquifer (the Barton Springs portion of the Edwards (Balcones Fault Zone) Aquifer, Central Texas) and their mineralogy, grain-size distribution, organic carbon content, and specific surface area analyzed. Statistical analysis of the sediments separated the sampling sites into three distinct groups: (1) streambeds, sinkholes, and small springs; (2) wells; and (3) caves. Sediments from the primary discharge spring were a mix of these three groups. High organic carbon content and high specific surface area gives some sediments an increased potential to transport contaminants; the volume of these sediments is likely to increase with continued urbanization of the watershed. Received: 13 April 1998 · Accepted: 6 October 1998     

Heavy metals in sediments of the Tecate River, Mexico

Ten sites along the Tecate River, Mexico were sampled to evaluate the cadmium, lead, nickel and chromium concentrations in sediments. The result shows contamination for cadmium in most of the sites, where two sites were class 4 (polluted to strongly polluted) according to geoaccumulation index proposed by Muller. Two sites were found polluted for all the heavy metals analyzed (Cr, Cd, Pb and Ni), indicating the effect of anthropogenic activities. A correlation between Ni and Cd concentration had been found indicating a common source. These metals are usually used in electroplating industry. The results of this study can be used for decision makers to prioritize measures to control the pollution for these metals.     

南极普里兹湾表层沉积物微量元素分布特征及其物源指示意义

利用电感耦合等离子体质谱仪测定了中国南极科考21~27航次期间获取的普里兹湾表层沉积物中Cu、Pb、Zn、Cd、Cr、Co、Al、Fe、Mn的含量,分析了普里兹湾微量元素的分布特征,结合沉积物粒度分布、生物硅含量,并利用富集系数和主成分分析的方法,探讨了微量元素的物源指示意义。研究结果表明:普里兹湾沉积物中的微量元素含量与南大洋其他海域具有很好的可比性。Cu、Zn、Cr、Co、Fe、Mn含量在陆坡深海区明显高于冰架边缘区和陆架区;Al、Pb含量在冰架边缘区较高;而Cd含量在陆架区相对较高。人类活动对普里兹湾沉积物中的微量元素没有明显的影响,南极大陆岩石风化产物和海洋生物源性沉降是其主要来源。冰架边缘区及陆架破折处P2-9站位的微量元素主要为岩源性输入。陆架区、陆坡深海区的微量元素Cu、Zn、Cr、Co、Fe、Mn明显受到生源性物质输入的影响。而普里兹湾沉积物中Cd则主要来源于硅藻的吸收利用及硅质软泥的富集。     

The influence of grain-size analysis methods and sediment mixing on curve shapes and textural parameters: Implications for sediment trend analysis

To this day, deterministic physical models capable of explaining the evolution of grain-size distributions in the course of transport are still lacking. For this reason, various attributes of particle frequency distributions, in particular curve shapes and textural parameters, have for many decades been investigated for potential information about transport behaviour and size-sorting processes of sediments in numerous environments. Such approaches are essentially conceptual and hence rely heavily on the validity of the assumptions on which they are based. A factor which has to date been largely ignored in this context, is the fact that different methods of grain-size analysis (e. g. sieving, laser absorption and diffraction, settling velocity measurements), when applied to the same sample material, produce variable curve shapes, and hence incongruous textural data. This is illustrated by selected examples showing the differences between sieving and settling results, conversion of settling velocities into equivalent settling diameters (psi-phi-transformations), and the influences of particle shape, particle density, and water temperature. It is demonstrated that particle-size distributions are not only method-dependent but also dependent on the adopted post-processing procedure. As a result, only frequency curves generated by the same method and subsequently processed by identical computational procedures can be meaningfully compared. Furthermore, the computation of textural parameters from bi- or multimodal size distributions produces spurious results which are unrelated to the processes leading to the mixing of different size populations frequently observed in nature. In such cases, only the decomposition of such distributions into individual populations and the spatial comparison of such populations makes any sense. Because a physical explanation for the generation of size distributions is lacking, a particular curve shape of a grain-size population has no meaning on its own. Only a systematic comparison of progressively changing curve shapes (and associated textural parameters) of sediments collected on a closely spaced grid can yield data suitable for sediment trend analysis.     

Scale effects of eroded sediment transport in Wujiang River Basin,Guizhou Province,China

In recent years, research on spatial scale and scale transformation of eroded sediment transport has become a forefront field in current soil erosion research, but there are very few studies on the scale effect problem in Karst regions of China. Here we quantitatively extracted five main factors influencing soil erosion, namely rainfall erosivity, soil erodibility, vegetative cover and management, soil and water conservation, and slope length and steepness. Regression relations were built between these factors and also the sediment transport modulus and drainage area, so as to initially analyze and discuss scale effects on sediment transport in the Wujiang River Basin (WRB). The size and extent of soil erosion influencing factors in the WRB were gauged from: Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model (ASTER GDEM), precipitation data, land use, soil type and Normalized Difference Vegetation Index (NDVI) data from Global Inventory Modeling and Mapping Studies (GIMMS) or Advanced Very High Resolution Radiometer (AVHRR), and observed data from hydrometric stations. We find that scaling effects exist between the sediment transport modulus and the drainage area. Scaling effects are expressed after logarithmic transformation by a quadratic function regression relationship where the sediment transport modulus increases before decreasing, alongside changes in the drainage area. Among the five factors influencing soil erosion, slope length and steepness increases first and then decreases, alongside changes in the drainage area, and are the main factors determining the relationship between sediment transport modulus and drainage area. To eliminate the influence of scale effects on our results, we mapped the sediment yield modulus of the entire WRB, adopting a 1 000 km2 standard area with a smaller fitting error for all sub-basins, and using the common Kriging interpolation method.     

Physical criteria for distinguishing sandy tsunami and storm deposits using modern examples

Modern subaerial sand beds deposited by major tsunamis and hurricanes were compared at trench, transect, and sub-regional spatial scales to evaluate which attributes are most useful for distinguishing the two types of deposits. Physical criteria that may be diagnostic include: sediment composition, textures and grading, types and organization of stratification, thickness, geometry, and landscape conformity.

Published reports of Pacific Ocean tsunami impacts and our field observations suggest that sandy tsunami deposits are generally < 25 cm thick, extend hundreds of meters inland from the beach, and fill microtopography but generally conform to the antecedent landscape. They commonly are a single homogeneous bed that is normally graded overall, or that consists of only a few thin layers. Mud intraclasts and mud laminae within the deposit are strong evidence of tsunami deposition. Twig orientation or other indicators of return flow during bed aggradation are also diagnostic of tsunami deposits. Sandy storm deposits tend to be > 30 cm thick, generally extend < 300 m from the beach, and will not advance beyond the antecedent macrotopography they are able to fill. They typically are composed of numerous subhorizontal planar laminae organized into multiple laminasets that are normally or inversely graded, they do not contain internal mud laminae and rarely contain mud intraclasts. Application of these distinguishing characteristics depends on their preservation potential and any deposit modifications that accompany burial.

The distinctions between tsunami and storm deposits are related to differences in the hydrodynamics and sediment-sorting processes during transport. Tsunami deposition results from a few high-velocity, long-period waves that entrain sediment from the shoreface, beach, and landward erosion zone. Tsunamis can have flow depths greater than 10 m, transport sediment primarily in suspension, and distribute the load over a broad region where sediment falls out of suspension when flow decelerates. In contrast, storm inundation generally is gradual and prolonged, consisting of many waves that erode beaches and dunes with no significant overland return flow until after the main flooding. Storm flow depths are commonly < 3 m, sediment is transported primarily as bed load by traction, and the load is deposited within a zone relatively close to the beach.     

云南个旧—文山区地球化学异常

个旧—文山区可分为五个地球化学区,以此为基础分析各区成矿地质条件及水系沉积物元素含量特征,找出元素异常分布信息,进行科学有效评价。     

Accumulation and speciation of selenium in evaporation basins in California,USA

The accumulation of selenium in evaporation basins (or ponds) in the San Joaquin Valley, California is of a great concern due to its potential hazards to environments. In this study, the accumulation, speciation and concentrations of Se were examined in waters as well as sediments in a system of the evaporation ponds. A significant decrease in the total dissolved Se concentration in Cell 1 in which drainage water with higher Se concentration was pumped from Inlet Channels indicated that the immobilization of Se was active in the Cell 1 and resulted in the higher Se concentration in sediments compared to the terminal cell such as Cell 9. The percentage of reduced Se species such as selenite [Se(IV)] and org-Se of total Se in drainage waters was also found increased in Cell 1 compared to Inlet Channels. The total dissolved Se concentrations in water along flow paths from Cell 1 were relatively constant except for terminal cells such as Cells 9 and 10, which showed higher total dissolved Se concentrations due to evapoconcentration. The percentage of reduced Se forms of total Se was inversely proportional to the percentage of Se(VI) depending on the redox condition of evaporation ponds along the flow paths. Sequential extractions of Se species in sediments indicated that organic associated Se and elemental Se were prevalent forms in sediments in the ponds system. The higher concentrations of elemental Se and organic associated Se in sediments in Cell 1 indicated that the immobilization of Se was active in the sediments compared to Cell 9, while the percentage of both fractions of total Se in sediments in Cells 1 and 9 was relatively constant. The organic materials from algae might provide carbon sources for Se reduction and Se sink in sediments in its elemental and organic associated forms.     

湖泊底泥疏浚对沉积物再悬浮及营养盐负荷影响的模拟

选取太湖梅梁湾污染底泥为研究对象,利用沉积物再悬浮发生装置,通过室内模拟实验研究太湖夏季常规风情下底泥疏浚对沉积物再悬浮及上覆水营养盐动态变化的影响.结果表明,在模拟的风情扰动过程结束时(5 h),扰动过程未疏浚与疏浚处理水柱总悬浮颗粒物(TSS)含量变化差异显著,未疏浚对照水柱TSS含量是初始值的7.7倍,而疏浚水柱TSS在第2 h达到峰值,为初始值的3.8倍;未疏浚水柱TSS含量沉降过程最初1 h迅速降低了84.0%,而疏浚水柱TSS含量在沉降3 h后趋于平衡.伴随着沉积物的再悬浮过程,疏浚与未疏浚对照水柱中TP含量均在第5 h达到最大,分别增加负荷78.6和92.2 mg/m2.就短时效而言,底泥疏浚后沉积物的再悬浮过程显著受到抑制,并能够显著地减小沉积物再悬浮过程中溶解性磷酸盐的释放;但对水柱中总磷、总氮、铵氮、硝酸盐和亚硝酸盐含量变化影响较小.     

发达国家禁用(限用)含磷洗衣粉的措施

于１９９５年４月－１９９６年１月对杭州西湖沉积物的若干物理,化学性状作了研究,沉降试验表明,沉积物中粒径在０．０６７－０．００２９mm之间的颗粒占沉积物总量的８０．８％,０．００２９mm以下的占４．３％,基本属于粉砂级范围,沉积物受扰动后再悬浮会明显影响水体的透明度,沉积物处于中性（ＰＨ＝６．６０－７．４０）和低厌氧状态（ＥＨ＝－３ｍＶ至１６７ｍＶ）,界面溶解氧含量在１mg／Ｌ左右,沉积物处于中性（ＰＨ