Two-dimensional modeling of fine sediment transport with mixed sediment and consolidation: Application to the Gironde Estuary,France

In order to optimize ship navigation in the macrotidal Gironde Estuary, a recent project funded by the port of Bordeaux aims at better understand and forecast hydrodynamic and fine sediment transport within the estuary. In the framework of this project, a two-dimensional hydro-sedimentary model is built. The model includes hydrodynamic forcings, mixed-sediment transport, and consolidation processes. The harmonic analysis of the astronomical tides reveals a strong distortion of the tidal wave inducing the growth of overtide constituents and the non-significant effect of tide-surge interactions in annual-scale prediction. Depending on hydrological conditions, river discharge can considerably alter the model accuracy due to the migration of the turbidity maximum zone modifying the bottom roughness. Comparison with measurements shows the ability of the model to reproduce suspended-sediment concentrations in the central Estuary. Sensitivity of the model to sediment features has also been discussed in regard of suspended-sediment concentrations and fluid mud deposits. The model will be further coupled with ship squat predictions and a morphodynamic model.     

A new portable in situ flume for measuring critical shear stress on river beds

A new portable in situ flume(PISF)for measuring critical bed shear stress(CBSS)was developed in this study.The PISF consists of an open bottom sediment erosion chamber and an electrically-driven pump.Unlike most existing in situ flumes with similar designs,the new PISF does not rely on monitoring the flow conditions or particle density in the sediment erosion chamber;instead,it is a pre-calibrated flume.The calibration was performed by first determining CBSS of various selected sediment samples of known particle size and density(using the law of the wall),based on flow velocity-depth profiles measured in a 6 m straight open-channel flume using a Particle Image Velocimetry(PIV)system.These same particles of known CBSS were then used in the new in-situ flume under controlled lab conditions to obtain a series of calibration curves of CBSS vs.pump electrical power.A wide variety of particle types and sizes(simulated sediments)were used in this two-step calibration procedure to widen CBSS measurement range and simulate cohesive force effects.The size of the PISF is much smaller and more practical than other similar devices as lamellar flow conditions are not required and it can be applied to a wide range of sediment types including cohesive sediments.     

Hydrodynamics and sediment dynamics in the German Bight. A focus on observations and numerical modelling in the East Frisian Wadden Sea

This work deals with analysis of hydrographic observations and results of numerical simulations. The data base includes acoustic Doppler current profilers (ADCP) observations, continuous measurements on data stations and satellite data originating from the medium resolution imaging spectrometer (MERIS) onboard the European Space Agency (ESA) satellite ENVISAT with a spatial resolution of 300 m. Numerical simulations use nested models with horizontal resolutions ranging from 1 km in the German Bight to 200 m in the East Frisian Wadden Sea coupled with a suspended matter transport model. Modern satellite observations have now a comparable horizontal resolution with high-resolution numerical model of the entire area of the East Frisian Wadden Sea allowing to describe and validate new and so far unknown patterns of sediment distribution. The two data sets are consistent and reveal an oscillatory behaviour of sediment pools to the north of the back-barrier basins and clear propagation patterns of tidally driven suspended particulate matter outflow into the North Sea. The good agreement between observations and simulations is convincing evidence that the model simulates the basic dynamics and sediment transport processes, which motivates its further use in hindcasting, as well as in the initial steps towards forecasting circulation and sediment dynamics in the coastal zone.     

Rare earth elements in sediments of the Vigo Ria,NW Iberian Peninsula

The abundance and distribution of rare earth elements (REE) and their signatures in the Vigo Ria were studied from 50 samples of surface sediments and related to the geological formation in its watershed. The total amount of REE in the Ria is heterogeneous. It ranges from 220 mg kg⁻¹ in the southern middle Ria margin in the vicinity of the Galiñeiro geological shore complex, which contains REE-enriched minerals, to 2 mg kg⁻¹ near the Ria mouth due to dilution with high levels of carbonated biogenic particles (31% of Ca). Rare earth elements of the Ria sediments are considerably enriched in light-REE relative to heavy-REE (a LREE/HREE ratio of 9.7±1.6) and also show a slightly negative Eu-anomaly. Low European shale normalised REE patterns were distinguished in the innermost sediments of Vigo Ria, but were not correlated with Al. This suggests a minor contribution of REE from upstream freshwater inputs to the sediments in the middle Vigo Ria zone. Normalised REE ratios in the middle Ria imply that fine particles enriched in REE may be exported from the Ria to shelf mud patches and REE can be useful as sediment tracers of Ria input on the shelf.     

Wave-induced steady streaming,mass transport and net sediment transport in rough turbulent ocean bottom boundary layers

The interaction between two important mechanisms which causes streaming has been investigated by numerical simulations of the seabed boundary layer beneath both sinusoidal waves and Stokes second order waves, as well as horizontally uniform bottom boundary layers with asymmetric forcing. These two mechanisms are streaming caused by turbulence asymmetry in successive wave half-cycles (beneath asymmetric forcing), and streaming caused by the presence of a vertical wave velocity within the seabed boundary layer as earlier explained by Longuet-Higgins. The effect of wave asymmetry, wave length to water depth ratio, and bottom roughness have been investigated for realistic physical situations. The streaming induced sediment dynamics near the ocean bottom has been investigated; both the resulting suspended load and bedload are presented. Finally, the mass transport (wave-averaged Lagrangian velocity) has been studied for a range of wave conditions. The streaming velocities beneath sinusoidal waves (Longuet-Higgins streaming) is always in the direction of wave propagation, while the streaming velocities in horizontally uniform boundary layers with asymmetric forcing are always negative. Thus the effect of asymmetry in second order Stokes waves is either to reduce the streaming velocity in the direction of wave propagation, or, for long waves relative to the water depth, to induce a streaming velocity against the direction of wave propagation. It appears that the Longuet-Higgins streaming decreases as the wave length increases for a given water depth, and the effect of wave asymmetry can dominate, leading to a steady streaming against the wave propagation. Furthermore, the asymmetry of second order Stokes waves reduces the mass transport (wave-averaged Lagrangian velocity) as compared with sinusoidal waves. The boundary layer streaming leads to a wave-averaged transport of suspended sediments and bedload in the direction of wave propagation.     

ON THE NUMBER OF FRACTIONS TO COMPUTE TRANSPORT OF SEDIMENT MIXTURES

1 INTRODUCTIONMany hydro-momhological mathematical models neglect the innuence of river bed maerialheterogeneity and its time and space changes during transport and related erosion/dePosition processes. Inthese models a rePresentative diameter of the river bed grain-size distribution (for examPle d5o) isspecified as initial data in each comPutational point of the modeled domain. Different d5o can be assignedto each ghd point but temPoral changes in bed material gradation cannot be simula…     

Influence of cohesion on California bearing ratio of clay-gravel mixtures

An understanding of the behavior of cohesive sediment is required to solve various engineering problems such as scour around bridge elements, mitigation of soil erosion, pavement design, river bed degradation,stable channel design. Pavement foundation designers principally use the California bearing ratio(CBR)to describe the subgrade and subbase materials and their strength. Several laboratory experiments were done to study the variation in the CBR of cohesive mixtures comprised of clay-gravel m...     

Inhibitability of soil loss and sediment concentration during consecutive rainfalls from experimental plots treated by endemic microorganisms

Consecutive rainfalls, due to changes in antecedent moisture, alter soil erosion processes, necessitating the implementation of suitable soil loss control methods. Biological soil microorganism approaches have been applied to control soil loss. However, information on the involvement of microorganisms in the soil loss and rill erosion processes has yet to be supplied. In this study, the individual and combined inoculation of cyanobacteria and bacteria was investigated during five consecutive rai...     

Natural sediment at a dam and its inorganic materials as adsorbents of praseodymium(Pr(Ⅲ))

The sediment deposited behind a dam(DS) and its inorganic materials(IM-DS) were characterized and used for the removal of praseodymium(Pr) from aqueous solutions. Quartz, albite, and kaolinite were found in the sediment by X-ray diffraction. Kinetic data fit well to a pseudo second-order model, the equilibrium time for DS and IM-DS was 2 h and 3 min, respectively, and the adsorption capacity was higher for Pr/DS(q_e= 4.91 mg/g) than for Pr/IM-DS(q_e= 3.01 mg/g) in these condi...     

A new concept to forecast the process of suspended sediment accumulation in the bottom sediment of small reservoirs

The new concept presented for forecasting the rate of accumulation of suspended sediment in reservoir water in the bottom sediment allows reasonable estimates of the siltation process globally, regionally, or locally, to be obtained without the need for costly research. The method draws on three key parameters, i.e., the concentration of suspended sediments (SS), and its organic matter (OM_SS) content, as well as the storage capacity (V_R) (i.e., the water storage in the reservoir). All of these parameters easy to determine, with information on them, in fact, made widely available by most agencies managing reservoirs in different parts of the world. In practice, the proposed method can represent a missing link in the precise determination of a reservoirs rate of siltation (and hence, losses of storage capacity).