Influence of diversion angle on water and sediment flow into diversion channel

Accumulation of the sediment in the stream of the diversion channels adversely affects its operational systems. Diversion channels are often constructed perpendicular to the main river. In this study, the water flow and sediment transport in the diversion channel with different angles were investigated in an attempt to maximize water discharge and minimize sediment discharge. A physical model with movable bed was used to simulate water and sediment flow with five diversion angles (θ) between (30°–90°). Moreover, three bed width ratios (B_r) (the relation between diversion to main channel bed width) between 30% and 50% and five total discharges between (7.25 L/s to 12.25 L/s) were considered for each case of (θ). The results showed, up to 10%, increasing in proportion discharge ratios for 30 and 45 diversion angles compared with 90° diversion angle. The results also showed that the lowest diversion sediment concentration was provided by the (θ) of 30°. Across all scenarios, the average proportion concentration reduction was 64%, compared with 90° diversion angle. Closer observation of the diversion system mechanism confirmed that decreased (θ) result in decreased sediment concentrations in the diversion channels. In conclusion, the diversion channel water and sediment discharge could be effectively managed by changing the (θ) to 30° or 45° instead of 90°.     

Discussion of: Ortega-Flores et al. (2018) Provenance analysis of Oligocene sandstone from the Cerro Pelón area,southern Gulf of Mexico.https://doi.org/10.1080/00206814.2018.1476922

ABSTRACT

We discuss the 2018 publication that reports petrographic, heavy mineral data, mineral chemistry, and zircon geochronology for Oligocene sandstones in the Cerro Pelón area in southern Mexico Sureste basin. As the title of their paper says, the goal of their study is to establish the source (s) of the voluminous Cenozoic section in this region, reaching several kilometres in thickness and important as a petroleum system. These authors conclude that Oligocene sandstones of La Laja Formation were mostly sourced from eclogite- to greenschist-facies metasedimentary, metaigneous, and ultramafic rocks of the Guatemala suture complex. Minor contributions from the Chiapas Massif Complex, exposed directly to the south ~60 km of the Cerro Pelón area, were also suggested by the authors. They thus conclude that the Palaeogene stratigraphic record in southeastern Mexico was mostly controlled by the development of the Caribbean–North America plate boundary rather than by orogenic processes at the Pacific margin of North America. Presently, we do not agree with the conclusions of Ortega Flores and colleagues who studied the Cerro Pelón section, thus some discussion is required. Serpentinite bearing Nanchital Conglomerate is well exposed in the Cerro Pelón area, and high- to low-grade metamorphic rocks experienced an uplift in the vicinity of the Cerro Pelón area at the time of deposition of the La Laja Formation. We believe the data are better explained by multiple local sources in southern and eastern Oaxaca as well as sources to the south and southwest, which include the Cenozoic coastal batholith, the Grenvillean/Guichicovi basement complexes, the Chiapas Massif, the Mazatlán schist and other units in the Cuicateco Belt, as well as the Mesozoic cover of these areas (Todos Santos Formation, Cretaceous carbonate rocks, and Paleogene strata such as the Soyaló and Bosque Formations).     

Differences in trace metal concentrations among fluvial morphologic units and implications for sampling

 This study examines the segregation of trace metals within and between fluvial morphologic units in sand-sized and finer bed sediments in a cobble bed stream. The types of fluvial morphologic units sampled are low gradient riffles, high gradient riffles, glides, eddy drop zones, lateral scour pools, attached bars, and detached bars. Three to nine samples were collected from ten of each type of morphologic unit. All 12 metals show significantly different concentrations between some morphologic units in sediments smaller than 2 mm. Eddy drop zones and attached bars consistently have the highest metal concentrations, while low gradient riffles, high gradient riffles, and glides typically have the lowest concentrations. Metals showing the greatest between-unit variability are Al, Cr, Fe, Cu, and Ti, followed by Co, Mn, and Pb, while Mg, Mn, V, and Zn display relatively few differences between units. Lateral and longitudinal variations of metals within units are not significant, and there was no consistent, predictable variation in metal concentrations with distance downstream. Results indicate that metal studies in other gravel- and cobble-bed streams should include a reconnaissance survey to determine variations between morphologic units, stratify sampling by morphologic unit, and analyze spatial autocorrelation to determine sample spacing. Received: October 1997 · Accepted: 23 March 1998     

珠江三角洲近期水沙分配的变化及其影响与对策

近20多年，珠江三角洲西江与北江的水沙分配发生了重大变化，相当于增多了一条北江的水量和沙量向东输送，导致珠江三角洲腹心地区洪峰水位异常壅高，河道由淤转冲，口门水域面积缩小，滩涂面积扩展，伶仃洋尤其是西岸的淤积加速，对港口和航道有较大影响。     

Crustal contamination and fluid/rock interaction in the carbonatites of Fuerteventura (Canary Islands, Spain): a C, O, H isotope study

Fuerteventura—the second largest of the Canary Islands consists of Mesozoic sediments, submarine volcanic rocks, dike swarms and plutons of the Basal Complex, and younger subaerial basaltic and trachytic series. Carbonatites are found in two Basal Complex exposures: the Betancuria Massif in the central part of the island and the Esquinzo area in the north. values of the carbonatites increase progressively from south to north of the island. This phenomenon is attributed to different degrees of assimilation of sedimentary carbonate. Homogeneous, typically magmatic values for carbonatites which have preserved primary igneous textures and minerals suggest a well-mixed reservoir where changes in values result from the storage of carbonate magmas at different structural levels. The magma storage allowed assimilation of sediment to varying degrees before final emplacement of carbonatites. Shifts in towards more positive and negative values from presumed primary compositions are observed in the carbonatites. On the basis of the oxygen isotope compositions of calcite, mica and K-feldspar, and the hydrogen isotope compositions of micas, the changes in the values of the carbonatites can be related to fluid/rock interactions.     

The influence of organic debris on channel morphology and bedload transport in a New Zealand forest stream

The behaviour and form of, and bedload sediment transport through, a 3.5 m wide forest stream have been monitored for nearly three years. Bedload transport is highly episodic and spatially variable, and is controlled less by water discharge than by sediment availability. Organic debris in the channel creates temporary base levels and sites at which coarse sediment may remain stored for long periods; collapse or disruption of log and debris jams makes sediment available for transport in only a small proportion of the runoff events that are actually competent to move the material. Even then, sediment travels only a short distance before being redeposited, frequently behind debris accumulations further downstream. Rates of sediment transport during a given runoff event can vary markedly over short distances along the stream, again depending on whether sediment was made available for transport by log jam collapse upstream. Organic debris is therefore a major constraint on the application of physical laws and theories to explaining sediment movement in, and the morphology of, this stream.     

The assessment of sediment sources: A field experiment

The possibility of using metals from mining activity as tracers for identifying stream sediment sources is explored. Sampling of monthly bed sediment yield and of the spatial and temporal variation in Pb concentration was undertaken in a 1·02 km² catchment, and estimates of the sediment contribution from different stream reaches are calculated. The method has considerable limitations, for metal concentrations are notably dependent on sediment size, season, source availability, and the chemical mobility of the metal used. In most natural streams these must preclude the use of pollutants for simple sediment source identification.     

Sediment transport for desert watersheds in erodible materials

Sediment transport for five small watersheds in arid southern Israel, eroded into shales, chalks, anhydrites and alluvium is studied. Analysis includes data from three large watersheds in the southern United States. Results indicate that floodwater heavily laden with suspended load (10-60 per cent, by weight) is characteristic of watersheds cut in erodible materials. No correlation was found between environmental characteristics such as lithology, catchment area, angle of slope or rainfall intensity and suspended-sediment concentration or texture. The carrying capacity for sands, derived both from hillslopes and channel alluvium is greatly increased by high suspended silt concentration, the trend being (where R = ratio, % fines/% sand; C_s = suspended load concentration, per cent by weight). The high concentration of fine sediment effectively causes more sand transport than would normally occur. This is also true for transport of coarser clastics; higher velocities, typical of highly concentrated silt suspensions, increased competence for transporting pebbles and boulders. The action of a large variety of processes (splash, wash, rilling, gullying, sliding, mudflow) combine with low infiltration and high credibility to render every rainstorm erosionally effective, and high concentrations of washload increase both the capacity and competence of coarse clastic transport. Whole basins are thus subjected to high rates of denudation (2-10 mm/yr).     

Further discussion on the intercomparison of the trace metal concentrations and particle size of fluvial sediment recovered from two centrifuge systems

A single large volume water sample taken at the mouth of the Upper Rhone River on Lake Geneva was processed directly in parallel through two continuous flow centrifuges, a Westphalia and an Alfa-Laval. Sediment was recovered from the Westphalia, and separately from the bowl and brass core of the Alfa-Laval. The three sediment samples were analyzed for particle size and the following elements: Zn, Cu, Mn, Cr, P, Co, B, V, Be, Sr, Na, Pb, Ni, Ba, Fe, Ca, and Mg. Results indicate that the particle size recovery of both machines is similar when sediment from the brass core and bowl of the Alfa-Laval are combined, and that the recovery for all elements other than Cu, V, B, and Pb are the same when the particle size differences are taken into account. Sediment from the Alfa-Laval brass core is clearly contaminated by Cu, B and is also elevated in V and Pb but not to a significant extent. The sediment recovered from the bowl of the Alfa-Laval is contaminated only with Cu, with a 10 ppm increase over the 52 ppm recovered in the Westphalia sediment. Operating procedures involve the discarding of the brass core sediment and the mixing of the Alfa-Laval bowl sediment with that from the Westphalia. The consequent increase in Cu is estimated at less than 5 ppm or within the confidence level of the analysis. These procedures are recommended to all operators of non modified Alfa-Laval units.     

Urbanised beaches of the Ligurian coastal area (NW Mediterranean): A classification based on organic-matter characteristics and hydrolytic enzymatic activities

The beaches of Liguria have been intensively affected by human activities for over a century, transforming nearly the entire coastline from natural to urbanised and significantly upsetting beach ecological properties. The present study aims to investigate 9 Ligurian beaches characterised by different degree of urbanisation, to test if and to what extent the organic-matter (OM) recycling processes can be linked to the human activity. Swash zone sediment, sampled during the spring–summer–autumn period, when the anthropogenic influence is at its maximum due to tourism, was analysed for OM features and recycling processes. Multivariate statistical analyses showed that huge amounts of detrital OM accumulated in the more urbanised sites, where the anthropogenic influence was at its peak, deriving from higher inhabitant number and density, from the presence of crowded roads very near to the swash zone and sewage treatment plants. The presence of torrent outlets on the beaches provided further OM accumulation. Lipids, carbohydrates and degraded autotrophic pigments were the OM fractions mainly responsible of the differentiation, and rather constant, high labile phosphorus contents were found in the more urbanised sites. The high activity values of the hydrolytic enzymes indicate the response of the microbial system to the OM accumulation in the urban sites. However, a decoupling of the trends of some enzymatic activities (namely glucosidase and lipase) and their target OM was observed in the highly urbanised conditions.