Long-term bed load transport rate based on aerial-photo and ground penetrating radar surveys of fan-delta growth, Coast Mountains, British Columbia

Sequential aerial photography, sonar bathymetry, ground-penetrating radar (GPR), and sediment sampling and analysis provide the basis for calculating the volumetric and mass rate of progradation of the delta of Fitzsimmons Creek, a steep, high-energy, debris-flow-dominated channel draining about 100 km² of the southern Coast Mountains of British Columbia. Fitzsimmons Creek is typical of small mountain rivers in the region. GPR imaging is used to define the pre-depositional morphology of the receiving basin, a technique that improves the accuracy of the volumetric survey. The 52-year record (1947–1999) of progradation yielded an average annual volumetric transport rate of 1.00±0.16×10⁴ m³ year⁻¹ for bed load, corresponding to a mass transport rate of 1.60±0.28×10⁴ Mg year⁻¹. Bed load yields are consistent with those obtained in hydrogeomorphically similar basins in the region and elsewhere. Decade-based annual rates, which vary from 0.64±0.11×10⁴ to 2.85±0.38×10⁴ Mg year⁻¹, provide poor estimates of the 52-year average. Indeed, the 52-year record may also not be long enough to fully integrate the significant fluctuations in the sediment efflux from Fitzsimmons Creek. The methodology proposed in this paper can be transferred to other comparable mountain environments worldwide.     

A parameterisation for the threshold shear velocity to initiate deflation of dry and wet sediment

A new parameterisation for the threshold shear velocity to initiate deflation of dry and wet particles is presented. It is based on the balance of moments acting on particles at the instant of particle motion. The model hence includes a term for the aerodynamic forces, including the drag force, the lift force and the aerodynamic-moment force, and a term for the interparticle forces. The effect of gravitation is incorporated in both terms. Rather than using an implicit function for the effect of the aerodynamic forces as reported earlier in literature, a constant aerodynamic coefficient was introduced. From consideration of the van der Waals force between two particles, it was further shown that the effect of the interparticle cohesion force between two dry particles on the deflation threshold should be inversely proportional to the particle diameter squared. The interparticle force was further extended to include wet bonding forces. The latter were considered as the sum of capillary forces and adhesive forces. A model that expresses the capillary force as a function of particle diameter squared and the inverse of capillary potential was deduced from consideration of the well-known model of Fisher and the Young–Laplace equation. The adhesive force was assumed to be equal to tensile strength, and a function which is proportional to particle diameter squared and the inverse of the potential due to adhesive forces was derived. By combining the capillary-force model and the adhesive force model, the interparticle force due to wet bonding was simplified and written as a function of particle diameter squared and the inverse of matric potential. The latter was loglinearly related to the gravimetric moisture content, a relationship that is valid in the low-moisture content range that is important in the light of deflation of sediment by wind. By introducing a correction to force the relationship to converge to zero moisture content at oven dryness, the matric potential–moisture content relationship contained only one unknown model parameter, viz. moisture content at −1.5 MPa. Working out the model led to a rather simple parameterisation containing only three coefficients. Two parameters were incorporated in the term that applies to dry sediment and were determined by using experimental data as reported by Iversen and White [Sedimentology 29 (1982) 111]. The third parameter for the wet-sediment part of the model was determined from wind-tunnel experiments on prewetted sand and sandy loam aggregates. The model was validated using data from wind-tunnel experiments on the same but dry sediment, and on data obtained from simulations with the model of Chepil [Soil Sci. Soc. Am. Proc. 20 (1956) 288]. The experiments showed that soil aggregates should be treated as individual particles with a density equal to their bulk density. Furthermore, it was shown that the surface had to dry to a moisture content of about 75% of the moisture content at −1.5 MPa before deflation became sustained. The threshold shear velocities simulated with our model were found to be in good agreement with own observations and with simulations using Chepil's model.     

Potential toxicity of resuspended particulate matter and sediments: Environmental samples from the Bay of Banyuls-sur-Mer and Thermaikos Gulf

This contribution attempts to determine whether, and to what degree, environmental samples of resuspended particulate matter and sediments exert a toxicological impact. Further, an attempt is made also to screen the toxic level of potentially hazardous sites, based upon established sediment toxicity criteria. Therefore, a rapid, cost-effective and highly sensitive biotest (bioluminescence assay, based upon marine bacteria) has been applied on: biological fluid extracts; bottom sediments; and sediment trap samples. Samples were taken either from the Bay of Banyuls-sur-Mer (northwestern Mediterranean, France) or Thermaikos Gulf (northeastern Mediterranean, Greece). Biological fluid extracts and sediment trap samples corresponded to periods of resuspension events, or preceding and following such events.The results have revealed that the sampling strategy and biotest implemented in this study might be a useful tool for screening the toxicity of resuspended matter and sediments. Resuspension events appear to be able to exert an influence on the chemical forms of the micro-pollutants; thus on their bioavailability and toxicity. Nevertheless, based upon chemical analysis combined with the bioassay, the toxic level of the sediment samples could be determined, with the level at potentially hazardous sites being characterised.     

Data assimilation (4D-VAR) to forecast flood in shallow-waters with sediment erosion

In this paper, the four-dimensional variational data assimilation technique (4D-VAR) is presented as a tool to forecast floods. Our study is limited to purely hydrological flows and supposes that the weather, here a big rain, has been already forecasted by meteorological services. The technique consists in minimizing, in the sense of Lagrange, the cost function: a measure of the difference between calculated data and available observations, here the water level. This is done under constraints that are the equations of the physical model. In our case, we modified the shallow-water equations to include a simplified sediment transport model. The steepest descent algorithm is then used to find the minimum. This is made possible because we can compute analytically the gradient of the cost function by using the adjoint equations of the model. As an application of the 4D-VAR technique, the overflowing of the Chicoutimi River at the Chute-Garneau dam, during the 1996 flood, is investigated. It is found that the 4D-VAR method reduces the error in the water height forecast even when the erosion model is not activated. In terms of Lyapunov exponents, we estimate the predictability horizon of such an event to be about half-an-hour after a big rain. However, this limit of predictability can be increased by using more observations or by using a finer computational grid.     

Effects of calculation procedure and sampling site on trap method estimates of sediment resuspension in a shallow lake

Resuspension estimates given by two different trap methods in a shallow lake were compared. The sensitivity of the methods to errors in estimates of gross sedimentation and organic fraction of trapped material was explored. The methods were label method, in which resuspension is estimated by determining the organic fraction of surface sediment, suspended seston and trapped material, and SPIM/SPM method, where the relationship between settling particulate inorganic matter (SPIM) and total settling particulate matter (SPM) is used. During the whole 111 day study period, according to the label method, at a sheltered station 1949 g m⁻² dry weight of sediment was resuspended, whereas SPIM/SPM gave an estimate of 1815 g m⁻². The difference in the estimates was probably due to mineralization loss of organic material in the traps during the two week exposure periods. Sensitivity analysis showed that of the two methods, the label method was more sensitive to variations in the organic content of trapped material. At a wind-exposed station, the total amounts of resuspended matter given by the label method and by the SPIM/SPM method were 4966 g m⁻² and 4971 g m⁻², respectively. Due to wind effects, escape of trapped material took place, which caused underestimation of gross sedimentation and compensated the effects of mineralization loss to diminish the difference between the methods. Of the two methods, the SPIM/SPM method seems thus more suitable for lakes, where bacterial activity is high. If cyanobacterial blooms take place, the label method is probably more reliable, providing that the exposure time of sediment traps is kept adequately short.     

Using CRD method for quantification of groundwater recharge in the Gaza Strip, Palestine

Rainfall is the main source of groundwater recharge in the Gaza Strip area in Palestine. The area is located in the semi-arid zone and there is no source of recharge other than rainfall. Estimation of groundwater recharge from rainfall is not an easy task since it depends on many uncertain parameters. The cumulative rainfall departure (CRD) method, which depends on the water balance principle, was used in this study to estimate the net groundwater recharge from rainfall. This method does not require much data as is the case with other classical recharge estimation methods. The CRD method was carried out using optimisation approach to minimise the root mean square error (RMSE) between the measured and the simulated groundwater head. The results of this method were compared with the results of other recharge estimation methods from literature. It was found that the results of the CRD method are very close to the results of the other methods, but with less data requirements and greater ease of application. Based on the CRD method, the annual amount of groundwater recharge from rainfall in the Gaza Strip is about 43 million m³. An erratum to this article can be found at     

Temporal and spatial variations in water flow and sediment load in Narmada River Basin, India: natural and man-made factors

The Narmada River flows through the Deccan volcanics and transports water and sediments to the adjacent Arabian Sea. In a first-ever attempt, spatial and temporal (annual, seasonal, monthly and daily) variations in water discharge and sediment loads of Narmada River and its tributaries and the probable causes for these variations are discussed. The study has been carried out with data from twenty-two years of daily water discharge at nineteen locations and sediment concentrations data at fourteen locations in the entire Narmada River Basin. Water flow in the river is a major factor influencing sediment loads in the river. The monsoon season, which accounts for 85 to 95% of total annual rainfall in the basin, is the main source of water flow in the river. Almost 85 to 98% of annual sediment loads in the river are transported during the monsoon season (June to November). The average annual sediment flux to the Arabian Sea at Garudeshwar (farthest downstream location) is 34.29×10⁶ t year⁻¹ with a water discharge of 23.57 km³ year⁻¹. These numbers are the latest and revised estimates for Narmada River. Water flow in the river is influenced by rainfall, catchment area and groundwater inputs, whereas rainfall intensity, geology/soil characteristics of the catchment area and presence of reservoirs/dams play a major role in sediment discharge. The largest dam in the basin, namely Sardar Sarovar Dam, traps almost 60–80% of sediments carried by the river before it reaches the Arabian Sea.     

Prediction of river water temperature: a comparison between a new family of hybrid models and statistical approaches

River water temperature is a key physical variable controlling several chemical, biological and ecological processes. Its reliable prediction is a main issue in many environmental applications, which however is hampered by data scarcity, when using data‐demanding deterministic models, and modelling limitations, when using simpler statistical models. In this work we test a suite of models belonging to air2stream family, which are characterized by a hybrid formulation that combines a physical derivation of the key equation with a stochastic calibration of parameters. The air2stream models rely solely on air temperature and streamflow, and are of similar complexity as standard statistical models. The performances of the different versions of air2stream in predicting river water temperature are compared with those of the most common statistical models typically used in the literature. To this aim, a dataset of 38 Swiss rivers is used, which includes rivers classified into four different categories according to their hydrological characteristics: low‐land natural rivers, lake outlets, snow‐fed rivers and regulated rivers. The results of the analysis provide practical indications regarding the type of model that is most suitable to simulate river water temperature across different time scales (from daily to seasonal) and for different hydrological regimes. A model intercomparison exercise suggests that the family of air2stream hybrid models generally outperforms statistical models, while cross‐validation conducted over a 30‐year period indicates that they can be suitably adopted for long‐term analyses. Copyright © 2016 John Wiley & Sons, Ltd.     

中国中东部冬季霾日的形成与东亚冬季风和大气湿度的关系

利用1961-2013年中国地面台站长期观测资料和同期NCEP/NCAR再分析资料,以华北、江淮和华南为研究区,分析了中国中东部冬季霾日的形成与东亚冬季风以及大气湿度的关系。结果表明:(1)冬季霾日与东亚冬季风强度成显著的负相关。首先,东亚冬季风强度的减弱使得地面风速减小,进而导致冬季霾日增多。其中,华北7-8 m/s最大风速日数和江淮6-8 m/s最大风速日数的减少,及华南≤2 m/s最大风速日数的增多对各区冬季霾日的增多作用较大。其次,东亚冬季风减弱引起冬季气温的持续升高,易导致冬季霾日的增多,这在华北地区较之在江淮和华南更为明显。(2)由于气候变暖,冬季气温升高,使得近地面相对湿度减小。在江淮和华南地区,冬季霾日的增多与近地面相对湿度的减小显著相关,而在华北地区这种相关较弱。(3)冬季气温升高也有利于大气层结稳定度的增强,3个区域冬季霾日的增多均与大气层结稳定度的增强显著相关,特别是与对流层中低层(850-500 hPa)大气饱和度的降低显著相关。(4)冬季霾日数变化与区域水汽输送关系密切。其中,华北地区的冬季霾日数与水汽总收入成显著正相关,江淮地区与纬向水汽收入成显著正相关,与经向水汽收入成显著负相关,华南地区与经向水汽收入成显著负相关。     

Comparative assessment of Japan's long-term carbon budget under different effort-sharing principles

This article assesses Japan's carbon budgets up to 2100 in the global efforts to achieve the 2?°C target under different effort-sharing approaches based on long-term GHG mitigation scenarios published in 13 studies. The article also presents exemplary emission trajectories for Japan to stay within the calculated budget.

The literature data allow for an in-depth analysis of four effort-sharing categories. For a 450?ppm CO₂e stabilization level, the remaining carbon budgets for 2014–2100 were negative for the effort-sharing category that emphasizes historical responsibility and capability. For the other three, including the reference ‘Cost-effectiveness’ category, which showed the highest budget range among all categories, the calculated remaining budgets (20th and 80th percentile ranges) would run out in 21–29 years if the current emission levels were to continue. A 550?ppm CO₂e stabilization level increases the budgets by 6–17 years-equivalent of the current emissions, depending on the effort-sharing category. Exemplary emissions trajectories staying within the calculated budgets were also analysed for ‘Equality’, ‘Staged’ and ‘Cost-effectiveness’ categories. For a 450?ppm CO₂e stabilization level, Japan's GHG emissions would need to phase out sometime between 2045 and 2080, and the emission reductions in 2030 would be at least 16–29% below 1990 levels even for the most lenient ‘Cost-effectiveness’ category, and 29–36% for the ‘Equality’ category. The start year for accelerated emissions reductions and the emissions convergence level in the long term have major impact on the emissions reduction rates that need to be achieved, particularly in the case of smaller budgets.

Policy relevance

In previous climate mitigation target formulation processes for 2020 and 2030 in Japan, neither equity principles nor long-term management of cumulative GHG emissions was at the centre of discussion. This article quantitatively assesses how much more GHGs Japan can emit by 2100 to achieve the 2?°C target in light of different effort-sharing approaches, and how Japan's GHG emissions can be managed up to 2100. The long-term implications of recent energy policy developments following the Fukushima nuclear disaster for the calculated carbon budgets are also discussed.