古交矿区8号煤的实验室热解脱硫

介绍了古交矿区8号煤在不加催化剂和加催化剂两种条件下的实验室热解脱硫试验情况．结果表明，在不加催化剂时，升温速度为5～10℃／min脱硫效果最好，脱硫率大于40％；当在原煤中添加催化剂AlCl3和NH4Cl时，有较好的脱硫作用，焦炭中灰分也没有明显提高，而当添加催化剂CuCl2和CaO时，不能脱除煤中硫。并据此提出了建议脱硫方案。     

Aggregate resources: Production and environmental constraints

Aggregates are produced from sand and gravel deposits or from bedrock sources. Production sites are numerous to minimize transport and are more and more in a competing land use position. Urbanization, while creating a market, also sterilizes deposits and pressures producers to relocate further from populated areas. Regulating and permitting quarries is an issue in regions with growing populations. This regulatory environment may cause exploitation schemes to evolve towards greater recycling, importing, and marine production, for example. These changes may be entirely attributable to increased environmental constraints on producing operations and not on conventional mining constraints such as overburden, ore grade, and costs of operation.     

Compressional behavior of clayey sand and transition fines content

Clayey sand can be considered as a composite matrix of coarse and fine grains. The interaction between coarser and finer grain matrices affects the overall stress–strain behavior of these soils. Intergranular void ratio, e_s (which is the void ratio of the coarser grain matrix) can be utilized as an alternative parameter to express the compressive response of such soils. Oedometer tests conducted on reconstituted kaolinite–sand mixtures indicate that initial conditions, percentage of fines, and stress conditions influence the compression characteristics evidently. Tests showed that, up to a fraction of fines, which is named as transition fines content (FC_t), compression behavior of the mixtures is mainly controlled by the sand grains. When concentration of fines exceeds FC_t, kaolinite controls the compression. It was found that FC_t varies between 19% and 34% depending on the above mentioned factors. This range of fines content is also consistent with various values reported in literature regarding the strength alteration. Performed direct shear tests revealed that there is also a close relationship between transition fines content and shear strength, which is harmonic with the oedometer test results.     

φ75 mm双管单动采煤管在薄煤层及粉煤钻探中的应用

在邻水孔家山井田钻探施工中,由于施工区域煤层厚度不稳定,并且煤层主要以粉煤为主,前期技术准备不充分,造成煤层打丢打薄。通过对其原因的分析及采煤工具的选取和采煤工艺的摸索,引入Ф75 mm双管单动采煤管,并确定了一套简单易行的采煤工艺方法。应用表明,该钻具及工艺能够极大地提高煤样的采取率,防止煤层打薄打丢情况的发生。     

影响煤层构造变形特性与机理的关键因素

3个煤级的煤样高温高压实验结果表明,煤是一种温度敏感性较弱的岩石。影响煤层构造变形机理的关键因素是煤级,随煤级增高煤层塑性减弱、脆性增大。韧性变形主要发生在煤级较低的煤层,煤级较高煤层主要发生脆性变形。不能完全用煤层本身强度特性解释煤层容易发生强烈流变或成为拆离、滑脱层的现象,需考虑其它可能因素。     

A study on the limit void ratio characteristics of medium to fine mixed graded sands

The minimum and maximum void ratios, corresponding to states of densest and loosest packing, of 111 systematically prepared mixed graded sand samples are determined with Method 2A and Method B according to ASTM D 4253 and ASTM D 4254 standards, respectively. Although, those standards are applicable to soils that may contain up to at most 15% fines content, for the harmony of the results even for samples having fines content greater 15%, no other methods are used throughout the experimental program. The test results show that 3rd degree polynomial equations derived from existing experimental data, as a function of packing material percentage, are quite reasonable (R² ≈ 1.0) to estimate the variation of minimum and maximum void ratios for the sands considered. Furthermore, error analysis of the limit void ratios is also carried out. It is found that predictability of maximum void ratio for the soil types and gradations considered is more accurate than that of minimum void ratio.     

基于断裂力学的特厚煤层综放开采顶板破断规律研究

针对特厚煤层综放开采过程中矿压显现剧烈支架工作阻力难以确定的问题,结合特厚煤层工作面顶板岩层破断形成的悬臂梁-砌体梁力学结构模型。工作面来压阶段支架工作阻力不足时,引起砌体梁结构下沉使悬臂梁结构回转变形破断,造成上覆砌体梁结构滑落失稳压架使工作面矿压显现剧烈的特点,建立了含中心斜裂纹的悬臂梁结构破断的力学模型,应用断裂力学理论,分析了悬臂梁破断失稳的影响因素,推导了支架荷载的表达式。结果表明：裂纹倾角和长度是悬臂梁破断失稳的主要影响因素;支架荷载除与悬臂梁自身因素有关外,还与砌体梁垮落步距等因素相关。结合塔山煤矿8102综采工作面地质条件,计算了支架荷载的理论值,验证了理论分析的合理性。理论研究成果对于分析特厚煤层开采时的支架荷载的大小,合理选择支架减少顶板事故具有一定的工程实际意义。     

新疆沙尔湖煤田煤层特征及对比

沙尔湖煤田含煤地层为中侏罗统西山窑组,根据岩性特征、含煤性以及其组合特征,将西山窑组分为上、中、下三段,可采煤层均分布在中段,煤层层数多,厚度变化较大,可采煤层6～27层,可采煤层总厚114.35～139.90m,根据各煤层之间的沉积间距及其与上、下岩层的旋回韵律,又将其划分为Ⅰ、Ⅱ、Ⅲ煤组。以大量地质资料为基础,总结了主要含煤层段的岩相组合特点,揭示了各煤层间的差异及组合特征,利用有效的对比方法,特别是数字测井在煤层对比中的应用,对可采煤层进行系统对比分析,对煤层对比的可靠性进行评价,保证了层位对比的正确可靠,并解决了勘查工作中终孔层位难以确定的问题,为正确划分煤系地层、准确估算煤炭资源量提供了可靠依据。     

煤层定向水平分支井预测方法研究

借鉴石油系统地质导向工作方法,提出煤层中水平段钻进确定煤层倾角的三维空间计算方法,以及如何指导进入着陆点后调整孔斜角的原则。根据不同地层产状下钻头钻进和钻出煤层的姿态,总结出在钻进过程中因煤层产状变化引起的8种不同脱靶(入靶)模式,并推导出三维空间内8种模式下真实煤层视倾角的计算方法。采用半定量的方法给出脱靶后调整钻孔轨迹的方法以及孔斜调整区间。通过钻探实例验证该预测算法能够指导减少脱靶,提高煤层钻遇率和钻井效率。