城市某人工高边坡整体稳定性的可靠性分析

本文阐述了可靠性分析原理,采用蒙特卡洛模拟法对广州某人工高边坡的整体稳定性进行了可靠性分析,分析结果认为研究边坡属低危险性边坡,可判定为稳定边坡,但其可靠度并不满足工程安全等级,有必要通过一些必要的工程手段进行加固支护。     

既有地下空间设施安全性耐久性的模糊数学评价研究

本文利用模糊数学综合评价方法,对地下空间设施进行安全性和耐久性水平进行评价。建立反映地下设施安全性和耐久性水平的指标体系,并选定各基本评价因子,按照评价等级给各指标建立打分表,通过技术人员的打分建立评价矩阵以代替隶属函数,再用AHP法建立权重向量,用二级综合评价模型对目标系统进行评价,为地下设施的安全性和耐久性能提供有效的参考信息。     

红层与煤系复合结构覆岩采动破坏分析及其应用

许多矿区煤层采动影响范围内的覆岩层由红层和煤层共同构成。本文研究了山东省太平煤矿东区二叠系 3号煤层覆岩破坏和防水煤柱留设的问题 ,在对上覆第四系水文地质条件分析的基础上 ,对红层和煤系复合结构覆岩的工程地质特征和破坏状况进行了分析 ,确定了合理的防水煤岩柱高度 ,并经过开采验证 ,避免了水害发生.     

确定边坡最危险滑动面的计算机模拟

边坡稳定性分析 ,关键是确定潜在的滑动面 ,目的是有利于工程安全。本文编制了二、三维计算机模拟程序 ,在二维模拟中提出了四种计算模式 ,三维模拟中考虑了空间、荷载、渗流效应 ,结合工程实例对边坡进行模拟并对土层抗剪强度参数进行了反演 ,模拟计算与实测结果吻合 ,模拟出的抗剪强度参数平均值与实测的抗剪强度参数标准值相当     

波导法测量油井持水率的理论、方法和实验研究

油井内的钢铁质套管可视为大口径圆波导,为应用电磁波传播方法测量管内混合流体的持水率提供了可能性．本文通过分析油井套管构成的导波系统的电磁波传输特性,提出一种波导测量方法,并用数值模拟和物理模拟实验结果,考察方法的可行性．结果表明,波导法具有特殊优点和良好应用前景．     

核安全导则中的地震震级划分意义

本文论述了我国核安全导则中对地震进行两级划分的意义,着重讨论了大震在选址地震工作中的作用。最后,结合我国地震条件提出了大震划分的起算标度。     

The Ultimate CCD for Laser Guide Star Wavefront Sensing on Extremely Large Telescopes

All of the extremely large telescopes (ELTs) will utilize sodium laser guide star (LGS) adaptive optics (AO) systems. Most of these telescopes plan to use the Shack-Hartmann approach for wavefront sensing. In these AO systems, the laser spots in subapertures at the edge of the pupil will suffer from spot elongation due to the 10 km extent of the sodium layer and the large separation from the projection laser. This spot elongation will severely degrade the performance of standard geometry wavefront sensing systems. In this paper, we present a CCD with custom pixel morphology that aligns the pixels of each subaperture with the radial extension of the LGS spot. This CCD design will give better performance than a standard geometry CCDs for continuous wave lasers. In addition, this CCD design is optimal for a pulsed sodium laser. The pixel geometry enables each subaperture to follow a laser pulse traversing the sodium layer, providing optimal sampling of a limited number of detected photons. In addition to novel pixel layout, this CCD will also incorporate experimental JFET sense amplifiers and use CMOS design approaches to simplify the routing of biases, clocks and video output. This CCD will attain photon-noise limited performance at high frame rates, and is being incorporated in the plans for the Thirty Meter Telescope (TMT).     

Governance Logic and Basic Systems of the New “Food Safety Law of the People’s Republic of China”: a Focus on Social Co-Governance

To modernize food safety governance, we must carry out basic restructuring of its internal logic at the national level to reflect the features of contemporary Chinese society that shape food safety. This will entail establishing an overarching, macro-level conception of food safety that integrates “baseline safety”, “hub safety”, “co-constructed safety” and “endogenous safety”. These four dimensions of safety represent four fundamental requirements of food safety governance in modern Chinese society, which is a “risk society” (Beck 1992) and one that is also complex, open and pluralist. These requirements are: maximum legal liability, a unified, authoritative and efficient supervision system, a concept of social co-governance, and enterprises being the primary entities accountable for food safety. This article uses this analytical framework to interpret the basic contents of the newly revised Food Safety Law of the People’s Republic of China, and uses a focus on social co-governance to present the institutional highlights of this law and the transformation of the internal logic of food safety governance.     

A New Method of Surveying Underwater Parts of Self Elevating Drilling Platform

It is a new method of surveying leg spuds of self-elevating drilling platforms to lift them out of water with the help of additional middle guide blocks. Its main advantages in comparison with other methods normally used up to now are: less expensive, time saving, no need for specially designated water area, direct visual observation, good reliability and safety. The working principle has been presented with the example of two platforms "Bohai No. 8" and "Bohai No. 10", to which the method was used. Also a comprehensive comparison with other methods in technological and economical aspects is given in the paper.     

Design and Implementation of the Hydrographic Production and Management Information System (HYPAMIS)

With the development of hydrographic work and information techniques, the traditional work mode is not suitable for the Chinese Marine Safety Administration Bureau (CMSAB). Aiming at the separation of charts production and management, a new idea that is the integration of production, management, and quality control is presented. Geographic Information System (GIS), Management Information System (MIS), Office Automation (OA) and Spatial Database Management (SDM) advanced techniques are introduced into the workflows in CMSAB. To realize information sharing, a mixed mode with Browser/Server (B/S) mode and Client/Serve (C/S) mode are adopted. Based on the above ideas and strategies, an integrated system named Hydrographic Production And Management Information System (HYPAMIS) was developed. The whole workflow and three subworkflows including survey management workflow, production workflow, and quality control workflow of are outlined after re-engineering the CMSAB organization. Some design principles and key techniques of the HYPAMIS including the cooperation of GIS and MIS, object-oriented spatial data model and management, data management based on database, and security control are illustrated in detail. Then the implementation of the system is introduced briefly. Finally, performance evaluation of the system and future work is given.