三维地震小面元采集技术在晋城矿区的应用

依托“西部煤炭资源高精度三维地震勘探技术”工程,对晋城矿区进行了旨在提高小断层,小陷落柱探测能力的高密度三维地震勘探。根据面元选择因素及该区地质任务,采用5m×5m网格进行野外数据采集;考虑炮检距、方位角、覆盖次数、排列片横纵比及煤层埋深（350～500m）等因素,采用中点放炮、60道接收,24次覆盖（横向4次,纵向6次）的8线16炮束状观测系统,基岩中激发。原始资料经同一处理流程后,获得5m×5m×1ms、5m×10m×1ms、10m×10m×1ms及2.5m×2.5m×1ms不同单元的三维数据体多个,通过对比可以发现小断层,小陷落柱在其小面元叠加时间剖面、顺层切片及相干切片都有清晰的反映。实例说明,小面元采集技术可以提高对小构造的纵、横向分辨能力,满足山区对三维地震精确勘探的要求。     

小面元三维地震勘探技术在西山屯兰矿南五采区的应用

屯兰矿南五采区地形复杂,最大高差达271m,地表大面积为第四系黄土覆盖,激发困难。为探索研究小面元三维地震勘探技术的应用效果。在常规三维地震勘区域内划出1km^2,采用5m×5m小面元进行采集。在地震数据采集过程中,采取了加大激发井深、提高覆盖次数、减小CMP面元网格和加大接收排列等技术措施,做到“四小三高、二中一深、两个等高面”。通过插值、抽线及扩大面元处理。获得2．5m×2．5m×1ms、5m×5m×1ms、5m×10m×1ms、10m×10m×1ms以及不同叠加次数的三维数据体。资料解释工作主要是在5m×5m×1ms、2．5m×2．5m×1ms两个数据体上进行,解释落差大于或等于5m的断层6条,落差3～5m的断层8条;查明长轴直径20～30m的陷落柱4个。30～100m的陷落柱1个,大于100m的陷落柱3个。与相邻区常规三维地震比较,小面元三维地震勘探有利于对小陷落柱、小断层的控制和解释。     

Inversely-Mapped Analytical Solutions for Flow Patterns around and within Inclined Elliptic Inclusions in Fluid-Saturated Rocks

In this paper, an inverse mapping is used to transform the previously-derived analytical solutions from a local elliptical coordinate system into a conventional Cartesian coordinate system. This enables a complete set of exact analytical solutions to be derived rigorously for the pore-fluid velocity, stream function, and excess pore-fluid pressure around and within buried inclined elliptic inclusions in pore-fluid-saturated porous rocks. To maximize the application range of the derived analytical solutions, the focal distance of an ellipse is used to represent the size of the ellipse, while the length ratio of the long axis to the short one is used to represent the geometrical shape of the ellipse. Since the present analytical solutions are expressed in a conventional Cartesian coordinate system, it is convenient to investigate, both qualitatively and quantitatively, the distribution patterns of the pore-fluid flow and excess pressure around and within many different families of buried inclined elliptic inclusions. The major advantage in using the present analytical solution is that they can be conveniently computed in a global Cartesian coordinate system, which is widely used in many scientific and engineering computations. As an application example, the present analytical solutions have been used to investigate how the dip angle of an inclined elliptic inclusion affects the distribution patterns of the pore-fluid flow and excess pore-fluid pressure when the permeability ratio of the elliptic inclusion is of finite but nonzero values.     

The Epi－continental arc of Southeast China and relevant earthquakes

ＴｈｅＥｐｉ┐ｃｏｎｔｉｎｅｎｔａｌａｒｃｏｆＳｏｕｔｈｅａｓｔＣｈｉｎａａｎｄｒｅｌｅｖａｎｔｅａｒｔｈｑｕａｋｅｓＪＩＡ－ＷＥＩＸＵ（徐嘉炜）ＤｅｐａｒｔｍｅｎｔｏｆＲｅｓｏｕｒｃｅａｎｄＥｎｖｉｒｏｎｍｅｎｔａｌＳｃｉｅｎｃｅｓ,ＨｅｆｅｉＵ...     

Simco,a simulation software for CONICA,the coude nir camera for the very large telescope

CONICA is an acronym for COudé Near Infrared Camera. It is one of the four currently planned Infrared instruments for ESO's Very Large Telescope (VLT) in Chile. This multimode instrument is to be installed at the Coudé-focus (of Unit Telescope no. 1), where adaptive optics and speckle interferometry will also be available. High angular resolution imaging (to the diffraction limit) will be possible in the 1–5 m range, as well as spectroscopy with low- and medium resolution and polarimetry by means of Wollaston prism and wiregrid analysers. Various softwares are developed for this instrument. One of them: the Simulation Software has a threefold aim: 1. provide the user with feedback information on his/her choices of observational parameters. This is be achieved by displaying the calculated performance and throughput of the combined Source-Atmosphere-Telescope-Camera-Detector system in various formats, such as images, tables, isophotical images ... for point as well as for extended sources (also annular, double, etc.); 2. verify if his expectations are realistic, before actually using CONICA itself. 3. give feedback on the design to the developers of the instrument.On leave from his original institute, now at ESTEC in the ISO-project     

含煤层地质环境下地震波场的数值模拟

本文对含低速煤层地质环境下弹性波场多波多分量地震资料进行了二维数值模拟研究,对人工边界反射进行了有效处理,频散效应得到了有效的压制,对几种不同激发与观测排列方式下的弹性波资料进行了模型计算与分析。     

Enhancement of radon signals in geophysical studies with the track technique

The existence of a suspected geological fault has been confirmed using Solid State Nuclear Track Detectors (SSNTDs) by measuring radon concentration variations in the upper soil above its inferred position. The results obtained prompted us to increase the natural radon signal in the soil, using an additional radon source; this enhancement technique, has been experimentally checked with SSNTD detectors.On leave from Faculté des Sciences, Laboratoire des D.S.T.N. Université de Dakar, Dakar-Fann, Sénégal     

Fracture analysis in the south-western Corinth rift (Greece) and implications on fault hydraulic behavior

This paper reviews the data concerning the fracture network and the hydraulic characteristics of faults in an active zone of the Gulf of Corinth. Pressure gap measured through fault planes shows that in this area the active normal faults (Aigion, Helike) act, at least temporarily and locally, as transversal seal. The analysis of the carbonate cements in the fractures on both the hangingwall and the footwall of the faults also suggests that they have acted as local seals during the whole fault zone evolution. However, the pressure and the characteristics of the water samples measured in the wells indicate that meteoric water circulates from the highest part of the relief to the coast, which means it goes through the fault zones. Field quantitative analysis and core studies from the AIG-10 well have been performed to define both regional and fault-related fracture networks. Then laboratory thin section observations have been done to recognize the different fault rocks characterizing the fault zone components. These two kinds of approach give information on the permeability characteristics of the fault zone. To synthesize the data, a schematic conceptual 3D fluid flow modeling has been performed taking into account fault zone permeability architecture, sedimentation, fluid flow, fault vertical offset and meteoric water influx, as well as compaction water flow. This modeling allows us to fit all the data with a model where the fault segments act as a seal whereas the relays between these segments allow for the regional flow from the Peloponnese topographic highs to the coast.     

Early Jurassic rift structures associated with the Soapaga and Boyacá faults of the Eastern Cordillera, Colombia: Sedimentological inferences and regional implications

The NW-trending Bucaramanga fault links, at its southern termination, with the Soapaga and Boyacá faults, which by their NW trend define an ample horsetail structure. As a result of their Neogene reactivation as reverse faults, they bound fault-related anticlines that expose the sedimentary fill of two Early Jurassic rift basins. These sediments exhibit the wedge-like geometry of rift fills related to west-facing normal faults. Their structural setting was controlled further by segmentation of the bounding faults at approximately 10 km intervals, in which each segment is separated by a transverse basement high. Isopach contours and different facies associations suggest these transverse anticlines may have separated depocenters of their adjacent subbasins, which were shaped by a slightly different subsidence history and thereby decoupled. The basin fill of the relatively narrow basin associated with the Soapaga fault is dominated by fanglomeratic successions organized in two coarsening-upward cycles. In the larger basin linked to the Boyacá fault, the sedimentary fill consists of two coarsening-upward sequences that, when fully developed, vary from floodplain to alluvial fan deposits. These Early Jurassic rift fills temporally constrain the evolution of the Bucaramanga fault, which accommodated right-lateral displacement during the early Mesozoic rift event.     

Modeling of the classification behavior of the diaphragms used in multi-chamber cement mills

A new approach has been developed for describing the classification that arises at the diaphragm in multi-chamber ball mills. Fourteen industrial scale cement mills have been sampled in this study and after mass balancing, model fits of the equipment were done. Successive mill product predictions for the sampled conditions were achieved, and requirements to build up an optimization capable model are discussed.