云南绿春咪霞金矿成矿地质条件

咪霞金矿赋存在多元素高背景值下志留统薄层状蚀变板岩中,受北西向F6-1断裂及正长岩、煌斑岩控制,与多元素异常、黄铁矿化等多种围岩蚀变对应,具较好的成矿地质条件。     

框架预应力锚杆边坡支护结构的稳定性分析方法及其 应用

以边坡极限平衡理论及框架预应力锚杆边坡支护结构的圆弧滑动破坏模式为基础,在考虑框架、锚杆对土体边坡稳定性影响的情况下,基于圆弧滑动条分法的思想利用积分法建立了内部稳定性安全系数计算模型和最危险滑移面搜索模型。确定滑移面圆心坐标为几何控制参数,推导了安全系数计算模型中各变量与滑移面圆心坐标之间的函数关系式,从而获得了滑移面几何控制参数与内部稳定性安全系数之间的函数关系。利用网格法对框架预应力锚杆支护结构最危险滑移面的圆心坐标进行动态搜索和求解。最后采用Matlab语言编制了框架预应力锚杆边坡支护结构的稳定性分析程序,并结合工程实例进行了验算,讨论了此种方法的适用条件,结果表明该方法简明适用,较传统的经验分析方法更加合理。     

郑州市城区深部基岩层热储特征分析

通过对郑州市城区深部基岩层热储的岩性、构造、热源及盖层条件分析研究,总结了该区热储特征,并首次提出了断裂循环型带状热储构造网络体系的构思,这对该区今后深部基岩层热储的研究具有一定的参考意义。     

Time-dependent stress change during failure of rocks

The energy balance of a solid subject to fracture has been explored using heat and mass transfer equations with regard to the volumetric and superficial components. In the suggested model, brittle fracture of a cracked solid considered as a heterogeneous two-phase medium is described by an equation analogous to the Griffith’s criterion for propagation of a single crack. The derived equation is used, together with estimates of relative change in specific interface area, to study the respective change of free strain energy and pressure in rocks associated with failure.     

An implementation of rock engineering system for ranking the instability potential of natural slopes in Greek territory. An application in Karditsa County

This paper presents an application of rock engineering system (RES) in an attempt to reveal and assess the inherent instability potential of 388 sites where equivalent landslides have been manifested and recorded in the region of Karditsa County, Greece. The main objective has been defining the principal causative and triggering factors responsible for the manifestation of landslide phenomena, quantify their interactions, obtain their weighted coefficients, and calculate the instability index, which refers to the inherent potential instability of each natural slope of the examined region. From the statistical interpretation of the data reported in a well-documented database and concerning the examined failure sites, a clear correlation between the instability index and the area affected by a single landslide event has been revealed. Almost the entire failure sites, 98% of the examined slope sites, exhibit an instability index value over 55, a value which is thought to be a critical threshold for landslide manifestation concerning natural slopes in Karditsa County. It is argued that the presented RES methodology, engaging the selected set of parameters, could be considered as an effective expert's tool for ranking, in an objectively optimal and simple way, the instability potential of natural slopes in Karditsa County, and thus providing a tool for sound zoning landslide hazard.     

重视和加强岩矿物性的测量研究

本文从物探科学技术的进步,勘查任务的发展变化、物探方法应用范畴的扩大和物性勘探等几个方面,论述了岩石和矿物物理性质测量、研究的重要性,指出：物性工作不可能毕其功于一役,并提出了五点建议：１．深入研究各类矿藏及其围岩（直至地面）物性的空间变化规律,为选择、研究合适的物探方法,提高物探效果,进一步探讨“直接”找矿问题,提供依据;２．这项工作可专门进行,但最好尽可能利用为其他目的而设计的钻井进行;３．物     

Experimental investigation of the elastic modulus of a fractal system—A model of fractured rocks

The elastic properties of a physical model representing a damaged rock matrix were studied using a square lattice deformed under tensile stress. The elastic modulusM of such a system varies in agreement with percolation theory as|x–x _c | ^f , wherex is the damage parameter andx _c the threshold value of the damage parameter,f3.6. Atxx _c the scale dependence ofM can be expressed asML ^–f/v , whereL is the size of the sample andv the correlation exponent in percolation theory.The experimental results are of interest in assessing elastic properties in earthquake focal zones and fault zones in general.     

Effects of dynamic shear strength and time-histories stress analysis on newmark sliding block analyses

A simplified procedure for evaluating aseismic stability of slope subjected to earthquake shaking, in which the effect of dynamic shear strength and time-history stress on the yielding angular acceleration of sliding block is taken into account, is presented. The fundamental feature of this procedure is the dynamic shear strength. The numerical computations are performed by using the proposed method. It is shown that the computed sliding displacement for a given core dam, with either method of dynamic shear strength properly considered, is more rational compared with the conventional computational results based on static shear strength.     

Engineering geological studies and tunnel support design at Sulakyurt dam site, Turkey

This paper presents the results of engineering geological investigations and tunnel support design studies, carried out at the Sulakyurt dam site, northeast of Ankara, Turkey. The Sulakyurt dam will be used for flow control and water storage for irrigation projects. Studies were carried out both in the field and the laboratory. Field studies include engineering geological mapping, intensive discontinuity surveying, core drilling and sampling for laboratory testing. The diversion tunnel will be driven in rock mass, consisting of granite and diorite. Empirical, analytical and numerical methods were combined for safe tunnel design. Rock mass rating (RMR), Rock mass quality (Q) and Geological strength index (GSI) systems were used for empirical rock mass quality determination, site characterization and support design. The convergence–confinement method was used as analytical method and software called Phase², a 2D finite element program, was utilized as numerical method. According to the results acquired from the empirical, analytical and numerical methods, tunnel stability problems were expected in both granite and diorite rock masses. The support system, suggested by empirical methods, was applied and the performance of suggested support system was evaluated by means of numerical modelling. It was concluded that the suggested support systems were adequate, since after applying the suggested support system to granite and diorite, tunnel deformation and the yielded elements around the tunnel decreased significantly. Thus, it is suggested that for more reliable support design empirical, numerical and analytical methods should be combined.     

A Practical Procedure for the Measurement of Fragmentation by Blasting by Image Analysis

Summary. The operation of a digital image analysis system in a limestone quarry is described. The calibration of the system, required in order to obtain moderately reliable fragmentation values, is done from muckpile sieving data by tuning the image analysis software settings so that the fragmentation curve obtained matches as close as possible the sieving. The sieving data have also been used to extend the fragment size distribution curves measured to sizes below the system’s optical resolution and to process the results in terms of fragmented rock, discounting the material coming from a loose overburden (natural fines) that is cast together with the fragmented rock. Automatic and manual operation modes of the image analysis are compared. The total fragmentation of a blast is obtained from the analysis of twenty photographs; a criterion for the elimination of outlier photographs has been adopted using a robust statistic. The limitations of the measurement system due to sampling, image processing and fines corrections are discussed and the errors estimated whenever possible. An analysis of consistency of the results based on the known amount of natural fines is made. Blasts with large differences in the amount of fines require a differentiated treatment, as the fine sizes tend to be the more underestimated in the image analysis as they become more abundant; this has been accomplished by means of a variable fines adjustment factor. Despite of the unavoidable errors and the large dispersion always associated with large-scale rock blasting data, the system is sensitive to relative changes in fragmentation.