长江三峡链子崖,黄腊石地质灾害体场址合成地震地面运动的时程反应

利用长江三峡链子崖、黄腊石地质灾害体周围地区的天然地震记录,对此两地质灾害体的地震危险性进行了分析.应用随机过程理论,计算了两场址的场地地面运动加速度峰值、频谱特征和地震持续时间的人工合成地震加速度时程曲线,以作为两地质灾害体抗震防治的依据.本文的方法也可为重要的建筑结构,如核电厂、海洋平台和超高层建筑的抗震设计提供动力分析所需的人工地震地面运动时程曲线。     

岩石矿物组份质量转移的模糊聚类定量计算

本文根据岩石矿物组份质量分数值的定和特性 ,提出定量计算组份质量转移的新方法。该方法运用模糊动态聚类分析技术 ,通过计算复原定和差并判定差值类型 ,辅以相应的判别参数 ,逐步从中筛选出真恒量组份 ,再利用真恒量组份定值系数 ,计算出变组岩石矿物各组份的真实质量分数值和转移量值。笔者将该方法称为真恒量组份定值法 (TCF法 )。     

基于岩石变形声发射实验结果讨论岩石失稳的可预测性

根据室内岩石变形声发射实验结果,计算了声发射序列的地震非均匀度GL值,并以此探讨了岩石破裂失稳的可预测性。在双轴压缩、等速率加载条件下,含障碍体断层、挤压雁列断层和Ⅲ型剪切断层等非连续岩石标本在临近滑动失稳前,声发射活动均出现了显著的均匀—非均匀的状态变化,表现为GL值出现持续大于1的异常变化,GL值异常的位置与破裂成核部位相重合,并与断层走向一致;改变统计窗长、窗内分割数及能级统计下限计算声发射序列的GL值,结果表明,GL值计算结果具有一定的稳定性。综合分析认为,地震非均匀度(GL值)可以较好地刻画岩石失稳前夕因破裂成核导致的声发射活动在时间分布上的状态变化,GL值持续异常是岩石失稳的显著性标志,对预测岩石失稳具有较好的指示意义。     

Cohesive Crack Analysis of Toughness Increase Due to Confining Pressure

Apparent fracture toughness in Mode I of microcracking materials such as rocks under confining pressure is analyzed based on a cohesive crack model. In rocks, the apparent fracture toughness for crack propagation varies with the confining pressure. This study provides analytical solutions for the apparent fracture toughness using a cohesive crack model, which is a model for the fracture process zone. The problem analyzed in this study is a fluid-driven fracture of a two-dimensional crack with a cohesive zone under confining pressure. The size of the cohesive zone is assumed to be negligibly small in comparison to the crack length. The analyses are performed for two types of cohesive stress distribution, namely the constant cohesive stress (Dugdale model) and the linearly decreasing cohesive stress. Furthermore, the problem for a more general cohesive stress distribution is analyzed based on the fracture energy concept. The analytical solutions are confirmed by comparing them with the results of numerical computations performed using the body force method. The analytical solution suggests a substantial increase in the apparent fracture toughness due to increased confining pressures, even if the size of the fracture process zone is small.     

江苏仪征捺山火山机构及玄武岩石柱林

江苏仪征捺山为一个典型的古火山口,由玄武质岩石组成的火山溢流相、爆发相、通道相等岩相在空间上呈环状分布,且均向内倾斜,构成一个上大下小、向北东倾斜的喇叭口。火山喷发时间在距今约1000万年前,属中新世晚期产物。尤其是玄武岩石柱林规模宏大,气势雄伟,千恣百态,其火山石柱林价值已不再沉寂于地学标尺上,而以一种奇致的新姿态将成为本地域旅游业的新亮点。     

Analysis of rock drainage and cooling experiments for underground cryogenic LNG storage

Hydrogeological monitoring was conducted around a pilot cavern for underground cryogenic LNG (Liquefied Natural Gas) storage. The monitoring was mainly focused on the operation of a drainage and recharge system. After the operation of the drainage system commenced, the drainage rate decreased rapidly in the initial stages and then decreased gradually. Hydrogeological monitoring revealed that the rock drainage system operated effectively. During drainage, the water table was maintained below the cavern roof. The recharge for ice-ring formation was performed in two phases. The first phase involved the cessation of pumping in downward-drainage holes and the second involved the closure of upward boreholes. Since the water table was maintained below the cavern roof, artificial recharge was planned at first. However, it was not implemented due to heavy rainfall in the recharge stage. On the basis of hydrogeological monitoring and hydraulic tests, it was found that the fractures above the roof and on the right wall of the pilot cavern mainly affected seepage into the cavern and thermal variation due to the storage of liquid nitrogen. Thermal variation was examined by the thermometers installed around the pilot cavern. The cooling and thawing processes reveal the characteristics of thermal distribution in the rock and the 0 °C isotherm. The cooling phase lasted for six months, and the 0 °C isotherm progressed in time after the injection of liquid nitrogen into the cavern. The isotherm propagated up to about 4 m from the floor and the sidewall of the cavern and about 3 m from the cavern roof. The cooling rate of the rock mass above the cavern roof was lower than that of the other cavern sides due to the gaseous space in the upper part of the containment. The fractures were analyzed and considered for thermal modeling. A two-dimensional finite element analysis was performed to compare the field monitoring at the pilot cavern. The numerical modeling shows the distance between the ice ring and heat transfer pattern of the fractures around the pilot cavern. The propagation of the measured and calculated 0 °C isotherm reveals that the water-conveying joint on the right wall might affect thermal propagation through a thermal pipe.     

Salt weathering in dual-porosity building dolostones

The influence of rock fabric on physical weathering due to the salt crystallization of selected brecciated dolostones is discussed. These dual-porosity dolostones are representative of heterogeneous and anisotropic building rocks, and present highly complex and heterogeneous rock fabric features. The pore structure of the matrix and clasts is described in terms of porosity and pore size distribution, whereas the relative strength for each textural component is assessed using the Knoop hardness test. The whole characterisation process was carried out using the same samples as those used in the standard salt durability test (EN-12370), including connected porosity, the water saturation coefficient, fissure density, compressional wave velocity and waveform energy.

Results show the most important rock fabric elements to be considered are the matrix and clast properties and the nature of fissures. Firstly, a relatively weak matrix was the focus of major granular disintegration as it presents high porosity, low pore radius and reduced strength. Secondly, narrow micro-fissures appear to be important in the decay process due to the effectiveness of crystallization pressure generated by salt growth. On the contrary, macro-fissures do not contribute greatly to rock decay since they act as sinks to consume the high supersaturations caused by growth of large crystals. Additionally, an analysis of stress generated by crystallization was carried out based on the general situation of a lenticular crystal geometry. Finally, the relationships between whole petrophysical properties and durability were established using a principal component analysis. This analysis has clearly established that the durability of rocks affected by salt crystallization mechanisms diminishes in weaker and anisotropic rocks with high porosity and fissure density.     

Comparison of TL multiple aliquot, single grain GLSL SAR and C-14 ages for the Puritjarra, Australia, rock shelter

We report single-grain quartz luminescence ages for the Puritjarra rock shelter, with the aim of resolving an apparent discrepancy between ages obtained by ¹⁴C and a variety of luminescence methods, previously reported. Ages now found at all depths to 75 cm (ages to 30 ka) can be interpreted as largely resolving the differences. This implied caveat arises because single-grain methods are statistically inefficient. As a consequence, a degree of interpretation is inevitable in analysing the data. The emphasis in the present paper is an analysis making use of weighted histograms. The measurements by single grain OSL and ¹⁴C, including ABOX–SC, taken together, can be regarded as compatible. They indicate human occupation of the Puritjarra rock shelter at least as early as 30 ka BP.     

老挝岩浆岩成因

老挝的岩浆活动分为三个阶段:早期古元古代—早石炭世,中期晚石炭世—中三叠世,晚期晚三叠世—第四纪。早期以中酸性及中基性侵入岩、火山岩为主,中期从超基性—酸性均有出露,晚期则为中酸性侵入岩,火山岩及玄武岩。反映不同构造位置及成因。