A large class of non-zonal oceanic flows satisfying the arnold-blumen sufficient condition for stability

Abstract

Recently Andrews has discussed an example of a topographically-forced non-zonal now satisfying the Arnold-Blumen sufficient condition for stability. At large distances from the topographic centre this flow becomes purely zonal and westward. After underlining the richness of solutions of the Andrews model, the present paper goes on to show that Andrews' technique can be applied successfully to a model where the vertical profile of static stability resembles those found in the ocean. In particular we obtain a large class of hydrodynamic stable flows, forced by the bottom topography, for continuously stratified fluids (two layers each with uniform Brunt-Väisälä frequency).     

Seismic driven probabilistic classification of reservoir facies for static reservoir modelling: a case history in the Barents Sea

In this paper we present a case history of seismic reservoir characterization where we estimate the probability of facies from seismic data and simulate a set of reservoir models honouring seismically‐derived probabilistic information. In appraisal and development phases, seismic data have a key role in reservoir characterization and static reservoir modelling, as in most of the cases seismic data are the only information available far away from the wells. However seismic data do not provide any direct measurements of reservoir properties, which have then to be estimated as a solution of a joint inverse problem. For this reason, we show the application of a complete workflow for static reservoir modelling where seismic data are integrated to derive probability volumes of facies and reservoir properties to condition reservoir geostatistical simulations. The studied case is a clastic reservoir in the Barents Sea, where a complete data set of well logs from five wells and a set of partial‐stacked seismic data are available. The multi‐property workflow is based on seismic inversion, petrophysics and rock physics modelling. In particular, log‐facies are defined on the basis of sedimentological information, petrophysical properties and also their elastic response. The link between petrophysical and elastic attributes is preserved by introducing a rock‐physics model in the inversion methodology. Finally, the uncertainty in the reservoir model is represented by multiple geostatistical realizations. The main result of this workflow is a set of facies realizations and associated rock properties that honour, within a fixed tolerance, seismic and well log data and assess the uncertainty associated with reservoir modelling.     

测震仪器健康状态数据交换平台的设计与实现

介绍了测震仪器健康状态数据交换软件平台的设计与实现.在软件开发过程中,主要使用了TCP/IP Socket编程、并发程序设计和JMS消息机制等关键技术,实现了与多种地震数据采集器的并发式网络通信以及健康状态数据的接收和交换.开源的消息中间件ActiveMQ作为统一交换平台,为仪器健康状态的交换共享提供了统一的数据接口,便于实现系统与新业务的无缝集成,提高了系统的弹性和可扩展性.利用本系统的框架模式开发的测震台站远程监视系统在河北测震台网得到了成功的应用,其功能和性能均达到了设计预期效果.     

The potential of historic rock avalanches and man-made structures as chlorine-36 production rate calibration sites

Samples from three medieval rock avalanches from the French (Le Claps, Mont Granier) and Austrian Alps (Dobratsch) and a man-made structure, i.e. the Stephansdom in Vienna, have been analysed for in-situ produced ³⁶Cl by accelerator mass spectrometry (AMS). All four sampling sites of independently known exposure duration turned out to be not appropriate as calibration sites for the determination of the ³⁶Cl-production rate from Ca. Indeed, the determination of short exposure ages for dating rock avalanches and man-made structures by ³⁶Cl is hindered dramatically by inheritance, especially for samples characterized by high ^natCl-concentrations. Generally, there are hints that the theoretical calculation of ³⁶Cl-production from epithermal and thermal neutron-capture on ³⁵Cl is highly underestimated in all existing models, thus, asking for particular precaution if working on high-Cl samples for any project. Hence, this work evidences that potential high inheritance, even for samples reasonably shielded before exhumation, has to be considered especially when dealing with recently exposed surfaces such as glacially polished rocks, alluvial terraces, fault scarps etc.     

The Final Frontier: Charter Schools as New Community Institutions of Gentrification

Recent scholarship on gentrification suggests the need to pay attention the role of the state in fostering new geographies of gentrification. This paper highlights the different agents and enablers of gentrification and the increasing importance of place-based community activism in inner city neighborhoods that is a response to a retrenching state. These agents include new types of gentrifiers: family-oriented, middle-class groups who have different interests and motivations from "traditional" (childless) gentrifiers. The neoliberalization of social service provision has enabled private groups, such as middle-class gentrifiers, to transform critical social institutions in gentrifying neighborhoods. One such institution is a charter school, which enables private management of public dollars to provide public education. Through interviews and archival analysis, these new dynamics in the gentrification process are explored by examining the importance of place-based community that is produced and consumed by gentrifiers in an intown neighborhood in Atlanta, Georgia.     

Validation of the SEBS-derived sensible heat for FY3A/VIRR and TERRA/MODIS over an alpine grass region using LAS measurements

In this study, sensible heat (H) calculation using remote sensing data over an alpine grass landscape is conducted from May to September 2010, and the calculation is validated using LAS (large aperture scintillometers) measurements. Data from two remote sensing sensors (FY3A-VIRR and TERRA-MODIS) are analysed. Remote sensing data, combined with the ground meteorological observations (pressure, temperature, wind speed, humidity) are fed into the SEBS (Surface Energy Balance System) model. Then the VIRR-derived sensible heat (VIRR_SEBS_H) and MODIS-derived sensible heat (MODIS_SEBS_H) are compared with the LAS-estimated H, which are obtained at the respective satellite overpass time. Furthermore, the similarities and differences between the VIRR_SEBS_H and MODIS_SEBS_H values are investigated. The results indicate that VIRR data quality is as good as MODIS data for the purpose of H estimation. The root mean square errors (rmse) of the VIRR_SEBS_H and MODIS_SEBS_H values are 45.1098 W/m² (n = 64) and 58.4654 W/m² (n = 71), respectively. The monthly means of the MODIS_SEBS_H are marginally higher than those of VIRR_SEBS_H because the satellite overpass time of the TERRA satellite lags by 25 min to that of the FT3A satellite. Relative evaporation (EFr), which is more time-independent, shows a higher agreement between MODIS and VIRR. Many common features are shared by the VIRR_SEBS_H and the MODIS_SEBS_H, which can be attributed to the SEBS model performance. In May–June, H is over-estimated with more fluctuations and larger rmse, whereas in July–September, H is under-estimated with fewer fluctuations and smaller rmse. Sensitivity analysis shows that potential temperature gradient (delta_T) plays a dominant role in determining the magnitude and fluctuation of H. The largest rmse and over-estimation in H occur in June, which could most likely be attributed to high delta_T, high wind speed, and the complicated thermodynamic state during the transitional period when bare land transforms to dense vegetation cover.     

Development of a 3-D urbanization index using digital terrain models for surface urban heat island effects

This study assesses surface urban heat island (SUHI) effects during heat waves in subtropical areas. Two cities in northern Taiwan, Taipei metropolis and its adjacent medium-sized city, Yilan, were selected for this empirical study. Daytime and night time surface temperature and SUHI intensity of both cities in five heat wave cases were obtained from MODIS Land-Surface Temperature (LST) and compared. In order to assess SUHI in finer spatial scale, an innovated three-dimensional Urbanization Index (3DUI) with a 5-m spatial resolution was developed to quantify urbanization from a 3-D perspective using Digital Terrain Models (DTMs). The correlation between 3DUI and surface temperatures were also assessed. The results obtained showed that the highest SUHI intensity in daytime was 10.2 °C in Taipei and 7.5 °C in Yilan. The SUHI intensity was also higher than that in non-heat-wave days (about 5 °C) in Taipei. The difference in SUHI intensity of both cities could be as small as only 1.0 °C, suggesting that SUHI intensity was enhanced in both large and medium-sized cities during heat waves. Moreover, the surface temperatures of rural areas in Taipei and Yilan were elevated in the intense heat wave cases, suggesting that the SUHI may reach a plateau when the heat waves get stronger and last longer. In addition, the correlation coefficient between 3DUI and surface temperature was greater than 0.6. The innovative 3DUI can be employed to assess the spatial variation of temperatures and SUHI intensity in much finer spatial resolutions than measurements obtained from remote sensing and weather stations. In summary, the empirical results demonstrated intensified SUHI in large and medium-sized cities in subtropical areas during heat waves which could result in heat stress risks of residents. The innovative 3DUI can be employed to identify vulnerable areas in fine spatial resolutions for formulation of heat wave adaptation strategies.     

A geocomputational analysis of Twitter activity around different world cities

The penetration and use of social media services differs from city to city. This paper is aimed to provide a comparison of the use of Twitter between different cities of the world. We present a temporal analysis of activity on Twitter in 15 cities. Our study consists of two parts: First, we created temporal graphs of the activity in the 15 cities, through which hours of high and low activity could be identified. Second, we created heat map visualizations of the Twitter activities during the period of 19 September 2012–25 September 2013. The heat map visualizations make the periods of intense and sparse activity apparent and provide a snapshot of the activity during the whole year.     

西安市PM2.5城乡差异及与城市热岛的关联研究

依据一种基于建筑用地比例和土地利用信息熵的城乡站点划分方法,将西安市环境与气象站点划分为城区、郊区和两类乡村站,讨论其PM_2.5的城乡分布特征及与城市热岛效应强度(Urban Heat Island Intensity,UHII)间的相关关系。结果表明,不同季节西安市呈现不同的PM_2.5城乡分布特征和日变化特征,两类乡村站点PM_2.5差异明显且下风向乡村站点(乡村D)对应的UHII_D对城区和乡村的影响程度大于上风向乡村站点(乡村U)对应的UHII_U。在城区较多本地排放的影响下,乡村PM_2.5浓度与 UHII_U(或UHII_D)相关系数均大于城区。随着UHII_D的增加,城乡PM_2.5相对浓度差值(RUPII_D)整体呈下降趋势且UHII_D与RUPII_D在春夏秋季显著负相关。UHII_D增大,城区近地面PM_2.5的水平扩散能力减弱,但PM_2.5的垂直扩散能力较乡村更强,从而UHII_D通过影响PM_2.5的传输扩散特征,进一步影响西安市RUPII_D。     

Effects of Drag Coefficients on Surface Heat Flux during Typhoon Kalmaegi (2014)

The lack of in situ observations and the uncertainties of the drag coefficient at high wind speeds result in limited understanding of heat flux through the air-sea interface and thus inaccurate estimation of typhoon intensity in numerical models. In this study, buoy observations and numerical simulations from an air-sea coupled model are used to assess the surface heat flux changes and impacts of the drag coefficient parameterization schemes on its simulations during the passage of Typhoon Kalmaegi (2014). Three drag coefficient schemes, which make the drag coefficient increase, level off, and decrease, respectively, are considered. The air-sea coupled model captured both trajectory and intensity changes better than the atmosphere-only model, though with relatively weaker sea surface cooling (SSC) compared to that captured by buoy observations, which led to relatively higher heat flux and thus a stronger typhoon. Different from previous studies, for a moderate typhoon, the coupled simulation with the increasing drag coefficient scheme outputted an intensity most consistent with the observation because of the strongest SSC, reasonable ratio of latent and sensible heat exchange coefficients, and an obvious reduction in the overestimated surface heat flux among all experiments. Results from sensitivity experiments showed that surface heat flux was significantly determined by the drag coefficient-induced SSC rather than the resulting wind speed changes. Only when SSC differs indistinctively (<0.4°C) between the coupled simulations, heat flux showed a weak positive correlation with the drag coefficient-impacted 10-m wind speed. The drag coefficient also played an important role in decreasing heat flux even a long time after the passage of Kalmaegi because of the continuous upwelling from deeper ocean layers driven by the impacted momentum flux through the air-sea interface.