微电网逆变器的自适应滑模控制策略研究

恒功率负载的输入阻抗具有负增量阻抗特性,其与前级电源的相互作用将对微电网系统的稳定运行产生重大影响.因此,研究带有恒功率负载的微电网稳定性具有实际意义.本文提出了一种改进的滑模控制方法,将其用于改善微电网系统的大信号稳定.首先在系统建模中考虑了系统的参数不确定性及外部干扰,使控制具有较好的鲁棒性;其次在滑模控制中引入自适应算法,对总扰动上界进行了估计,提高了控制的准确性;最后通过Matlab／Simulink建立了微电网模型,通过仿真验证了所提出策略的有效性.     

基于采样分布式估计器的多无人艇轨迹跟踪控制

提出了一种级联控制算法解决多无人艇（USVs）系统的分布式轨迹跟踪问题.这种控制算法可以分为两层：第一层是基于采样信息的分布式估计器,主要用于估计领航者的期望轨迹;第二层是每个无人艇的本地控制器,主要是结合滑模控制与神经网络径向基函数,在系统具有欠驱动、参数不确定性和扰动等因素的情况下,使其状态跟踪期望轨迹的本地估计值.为了求解上述跟踪控制问题,基于李雅普诺夫理论与级联系统理论,推导得到了所有无人艇位置状态收敛到期望轨迹的充分条件,并通过仿真结果验证了所提出控制方法的有效性与正确性.     

肥城矿区煤系中的顺层断层

肥城矿区煤矿生产中揭露了许多顺层断层,过去未被人们认识。笔者根据井下揭露资料,论述了顺层断层的特征及形成机制,并探讨了矿井生产中顺层断层的预测和处理方法。      

Vertical dynamic response of a disk on a saturated poroelastic half-space

This paper considers the vertical dynamic response of a disk on a saturated poroelastic half-space. Firstly the pressure-solid displacement form of the harmonic equations of motion for a poroelastic solid are developed from the form of the equations originally presented by Biot. These equations are solved by a new method. Then the mixed boundary value problem for the vertical harmonic vibration of a disk on a poroelastic half-space is studied. The two types of drainage conditions at the surface of the poroelastic half-space are considered: (a) the surface of the poroelastic half-space is assumed to be completely pervious both within and exterior to the plate; (b) The interface between the plate and the poroelastic half-space is assumed to be impervious and the exterior region is assumed to be pervious. By using the Hankel transform techniques, the paper develops the governing dual integral equations. These governing integral equations are further reduced to systems of standard Fredholm integral equations of the second kind by Abel transform.     

溃屈型滑坡稳定性分析中三个问题的探讨

针对溃屈型滑坡稳定性分析中的三个问题,即滑带土强度参数的分段取值,顺层段与切层段分界点和水的作用,逐一进行初步探讨。     

Palaeokarst and rauhwacke development,mountain uplift and subaerial sliding of tectonic sheets (northern Sierra de los Filabres,Betic Cordilleras,Spain)

The rauhwackes near Serón in the northern Sierra de los Filabres (S Spain), previously considered as true tectonic breccias, are reinterpreted on the basis of sedimentological, geomorphological and geometrical evidence as subaerial or nearly subaerial sedimentary deposits. Channel fills, parallel lamination, cross-lamination, graded bedding, sedimentary clastic dykes and other sedimentary structures and features occur in the rauhwacke body. These sedimentary rocks correspond to continental deposits of alluvial and karstic origin deposited over a karstified erosional surface of Nevado–Filabride marbles. Although no fossils have been found in the rauhwackes, a Tortonian age for these rocks is suggested on the basis of structural arguments and lithostratigraphic data from the nearby Almanzora basin. The rauhwackes were buried by slabs of Alpujarride rocks that gravitationally slid over them during the uplifting of the Sierra de los Filabres.     

Dynamic analysis of sliding structures with unsynchronized support motions

The dynamic analysis of sliding structures is complicated due to the presence of friction. Synchronization of the kinematics of all the isolation bearings is often granted to simplify the task. This, however, may lead to inaccurate prediction of the structural responses under certain circumstances. Stepped structures or continuous bridges with seismic isolation are notable examples where unsynchronized bearing motions are expected. In this paper, a logically simple and numerically efficient procedure is proposed to solve the dynamic problem of sliding systems with unsynchronized support motions. The motion equations for the sliding and non‐sliding modes of the isolated structure are unified into a single equation that is represented as a difference equation in a discrete‐time state‐space form and the base shear forces between the sliding interfaces can be determined through simple matrix algebraic analysis. The responses of the sliding structure can be obtained recursively from the discrete‐time version of the motion equation with constant integration time step even during the transitions between the non‐sliding and sliding phases. Therefore, both accuracy and efficiency in the dynamic analysis of the highly non‐linear system can be enhanced to a large extent. Rigorous assessment of seismic structures with unsynchronized support motions has been carried out for both a stepped structure and a continuous bridge. Effectiveness of friction pendulum bearings for earthquake protection of such structures has been verified. Moreover, evident unsynchronized sliding motions of the friction bearings have been observed, confirming the necessity to deal with each of the bearings independently in the analytical model. Copyright © 2000 John Wiley & Sons, Ltd.     

Residual slip of sliding blocks induced by near‐fault ground motions

The response of a rigid block supported on a horizontally moving foundation through a dry‐friction contact is investigated to near‐fault ground motions. Such motions can be thought of as consisting of a coherent component (‘pulse’) and an incoherent component, which can be described as a band‐limited ‘random noise’. The equation of motion of this strongly nonlinear system is reduced to a normalized form that reveals important parameters of the problem such as the critical acceleration ratio. The response of the sliding block to a set of uniformly processed near‐fault motions, covering a sufficiently wide range of magnitudes, is evaluated numerically for selected discrete values of the acceleration ratio. For each value of the critical acceleration ratio, the numerically computed residual slips are fitted with a Weibull (Gumbel type III) extreme value probability distribution. This allows the establishment of regression equations that describe accurately design sliding curves corresponding to various levels of non‐exceedance probability. The analysis reveals that the coherent component of motion contributes significantly to the response of the sliding block. Furthermore, the relevant acceleration in specifying the critical acceleration ratio is the (normalized) amplitude, α_{H_pulse}, of the pulse and not the (normalized) amplitude of the incoherent component α_H. Finally, the incoherent component is described quantitatively in terms of the root‐mean‐square acceleration a_RMS, and an attempt is made to understand its influence on the response of the sliding block. Copyright © 2016 John Wiley & Sons, Ltd.     

考虑支座摩擦滑移及结构碰撞的非规则人字形桥梁地震响应分析

针对非规则人字形桥梁在地震作用下灾变严重的问题,以一座非规则人字形桥梁为研究对象,建立其空间分析模型,研究综合考虑支座摩擦滑移、结构碰撞对非规则人字形桥梁地震响应的影响。结果表明:邻梁间的碰撞作用可使得桥梁墩顶位移及内力相比不考虑时有所减小,但同时也使梁体产生了较大的加速度脉冲效应;当考虑支座摩擦滑移和结构碰撞时,固定墩墩顶位移和邻梁相对位移峰值有一定程度增大,然而对梁体加速度脉冲效应结果影响并无统一规律;纵向地震波作用下,非规则人字形桥梁不仅存在顺桥向的碰撞,横桥向的碰撞响应也不容忽视。非规则人字形桥梁进行抗震设计计算时应选取符合实际情况的计算模型,考虑支座摩擦滑移及结构间的碰撞。     

Sliding mode fuzzy control: Theory and verification on a benchmark structure

A sliding mode fuzzy control (SMFC) algorithm is presented for vibration reduction of large structures. The rule base of the fuzzy inference engine is constructed based on the sliding mode control, which is one of the non‐linear control algorithms. In general, fuzziness of the controller makes the control system robust against the uncertainties in the system parameters and the input excitation, and the non‐linearity of the control rule makes the controller more effective than linear controllers. For verification of the present algorithm, a numerical study is carried out on the benchmark problem initiated by the ASCE Committee on Structural Control. To achieve a high level of realism, various aspects are considered such as actuator–structure interaction, sensor noise, actuator time delay, precision of the A/D and D/A converters, magnitude of control force, and order of control model. Performance of the SMFC is examined in comparison with those of other control algorithms such as H_{mixed 2/∞}, optimal polynomial control, neural networks control, and SMC, which were reported by other researchers. The results indicate that the present SMFC is efficient and attractive, since the vibration responses of the structure can be reduced very effectively and the design procedure is simple and convenient. Copyright © 2000 John Wiley & Sons, Ltd.