水库鱼产力评价标准与模式的研究

本文在总结国内外已有成果的基础上,运用专家系统和灰色统计方法,初步建立了一套水库鱼产力评价的指标体系、指标权重体系和指标标准体系,首次给出了比较系统和具有普适意义的评价方案;并运用模糊数学方法建立了综合定量评价模式,从而在很大程度上解决了以往评价中由于多指标重迭、交错造成的难判、误判问题,为水库渔业资源的合理开发利用提供了比较科学的依据。     

港口靠船桩工作性状计算的双参数法

港口靠船桩是承受重复性荷载或多循环荷载的一种横向承载桩。双参数法能较好地描述靠船桩 (单桩、群桩 )的桩土工作性状。用双参数法进行计算时 ,所给的地面条件必须由重复荷载或多循环荷载作用下实测出来。根据现场试桩资料 ,标定桩土参数 ,即k =mx1/n的指数l/n、桩土相对柔度系数α、桩土综合刚度EI等值 ,可以用来设计试桩附近局部地区同类条件下的其它长桩。对于没有进行试桩的某些工程 ,可以联合运用双参数法和p -y曲线法进行桩的分析     

利用地下水水位资料推求水文地质参数

依据模糊集合理论,提出了反求水文地质参数的一种新方法,即用模糊模式识别评价计算水位与观测水位的拟合程度,依模糊ISODATA聚类法的原理建立目标函数,以相应的聚类中心作为要求的水文地质参数。     

海岸工程中海浪数值模拟和环境参数选取的进展

主要介绍了我国近的来在海岸工程设计，建设中有关海浪数值模拟及环境参数选取方面的研究进展。     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

Wave runup on a concentric twin perforated circular cylinder

The regular wave interaction with a twin concentric porous circular cylinder system consisting of an inner impermeable cylinder and an outer perforated cylinder was studied through physical model and numerical model studies. The experiments were carried out on the twin concentric cylinder model in a wave flume to study the wave runup and rundown at the leading and trailing edges of the perforated cylinder. It was found that the maximum wave runup on the perforated cylinder is almost same as the incident wave height. The experimental results were used to develop the predictive formulae for the wave runup and rundown on the perforated cylinder, which can be easily used for design applications. The wave runup profiles around the perforated cylinder for different values of ka and porosities were studied numerically using Green's Identity Method. The results of the numerical study are presented and compared with the experimental measurements.     

Geoacoustic Characterisation of Fine-grained Sediments using Single and Multiple Reflection Data

Fine-grained sediments commonly occur in areas of the continental shelf where wave and current energy are weak. Bulk density, compressional wave speed and attenuation are fundamental physical properties of these sediments required for predicting the response of the seabed for diverse branches of marine science. The traditional coring approach is time and labor-intensive, with large uncertainties associated with sediment disturbance in the sampling phase. Acoustic methods offer the advantages of remote sensing, i.e., sampling the sediment structure without mechanical disturbance and a significantly larger seabed coverage rate per unit time. Two different acoustic methods are described: one using short-range single-bounce interactions with the seabed, and the second using long-range modal propagation to infer the sediment properties. The relative strengths and sensitivities of each approach are explored through simulations guided by experience with measured data.     

SAS测量水体表观光学参数的方法

SeaWiFS航空模拟器（SAS）是专门为在水面之上测量水体表观光学参数的现场设备。文章在介绍SAS现场测量以及数据处理基本方法的基础上，分析了2002年黄海试验SAS的应用效果，并与剖面法测量数据进行了比对。     

中国海区区域地质编图中重磁图的编制方法

本文简要介绍了局控项目《中国海区１∶５０万区域地质编图（大连幅）》重力异常图、磁力异常图的编制过程，给出了一种以计算机为手段、实现编图自动化的新方法，并分析了该方法与以往编图方法的不同和优点，以国际分幅在中国海区开展区域地质编图尚属首次，在既无海区地质调查规范，又无海区地质调查编图规范的情况下，这一工作无异具有开创性。从理论上系统总结出一套切实可行的编图方法，对于编制中国海区区域地质调查编图规范以     

Standard facies models to incorporate all heterogeneity levels in a reservoir model

The construction of reservoir models is frustrated by the fact that core and well cover only a fraction of the reservoir volume and it is therefore difficult to determine features like facies shape, -size, and -distribution, inter- and intra-facies boundaries and lateral trends from them. These features are, however, critical to fluid flow and they should necessarily be incorporated in the reservoir model and we therefore propose to systematically describe geometry and distribution of facies. To this end we make use of “standard facies models” that a priori contain all elements and boundaries of facies for a number of typical depositional environments.