Optimal orbits for Mars atmosphere remote sensing

Most of the spacecrafts currently around Mars (or planned to reach Mars in the near future) use Sun-synchronous or near-polar orbits. Such orbits offer a very poor sampling of the diurnal cycle. Yet, sampling the diurnal cycle is of key importance to study Mars meteorology and climate. A comprehensive remote sensing data set should have been obtained by the end of the MRO mission, launched in 2005. For later windows, time-varying phenomena should be given the highest priority for remote sensing investigations. We present possible orbits for such missions which provide a rich spatial and temporal sampling with a relatively short repeat cycle (50 sols). After computation and determination of these orbits, said “optimal orbits”, we illustrate our results by tables of sampling and comparison with other orbits.     

Topography and morphodynamics in the German Bight using SAR and optical remote sensing data

Morphological changes in coastal areas, especially in river estuaries, are of high interest in many parts of the world. Satellite data from both optical and radar sensors can help to monitor and investigate these changes. Data from both kinds of sensors being available for up to 30 years now, allow examinations over large timescales, while high resolution sensors developed within the last decade allow increased accuracy. So the creation of digital elevation models (DEMs) of, for example, the wadden sea from a series of satellite images is already possible. ENVISAT, successfully launched on March 1, 2002, continues the line of higher resolution synthetic aperture radar (SAR) imaging sensors with its ASAR instrument and now also allows several polarization modes for better separation of land and water areas. This article gives an overview of sensors and algorithms for waterline determination as well as several applications. Both optical and SAR images are considered. Applications include morphodynamic monitoring studies and DEM generation.

针对MODIS数据的大气水汽含量反演及31和32波段透过率计算

 针对MODIS的波段特征,首先,用近红外波段反演大气水汽含量; 然后,通过LOWTRAN模拟大气水汽含量与MODIS 31和32热红 外波段透过率的统计关系; 最后,计算31和32波段的透过率。该方法克服了以往一景图像只用1个透过率的局限性,使得透过率的求 算精确到每1个像元,同时保证参数获取的实时性。     

A Model to Calculate what a Remote Sensor ‘Sees’ of an Urban Surface

Whilst the measurement of radiation emissions from a surface is relatively straightforward, correct interpretation and proper utilization of the information requires that the surface area seen be known accurately. This becomes non-trivial when the target is an urban surface, due to its complex three-dimensional form and the different thermal, radiative and moisture properties of its myriad surface facets. The geometric structure creates shade patterns in combination with the solar beam and obscures portions of the surface from the sensor, depending on where it is pointing and its field-of-view (FOV). A model to calculate these surface-sensor-sun relations (SUM) is described. SUM is tested against field and scale model observations, and theoretical calculations, and found to perform well. It can predict the surface area seen by a sensor of known FOV pointing in any direction when placed at any point in space above a specified urban surface structure. Moreover, SUM can predict the view factors of the roof, wall and ground facets seen and whether they are sunlit or shaded at any location and time of day. SUM can be used to determine the optimal placement and orientation of remote sensors to study urban radiation emissions; if the facet temperatures are known or modelled it can calculate the average temperature of the system, and it can determine the directional variation of temperature (anisotropy) due to any particular surface-sensor-sun geometric combination. The present surface geometry used in SUM is relatively simple, but there is scope to make it increasingly realistic.     

A portable remote methane detector using an InGaAsP DFB laser

A portable remote methane detector based on infrared-absorption spectroscopy using an InGaAsP distributed-feedback laser is described. This equipment transmits a laser beam and detects a fraction of the backscatter reflected from the target. From this, the detector thereby measures the integrated methane concentration between the detector and the target. The equipment operator can easily detect methane clouds at a distance by hand-scanning the laser beam. To achieve a high sensitivity of detection, wavelength-modulation spectroscopy is applied to the infrared-absorption measurement for methane. The wavelength of the light source is modulated at a frequency of 10 kHz, and the center wavelength is stabilized at the center of the 2₃ band R(3) line of methane (1.65372 m). When used with typical targets at distances up to 10 m, the detector has a detection limit of less than 5 ppm-m. To the best of the authors knowledge, the detector is the only hand-held product capable of remote methane detection. Recently, this novel equipment was commercially introduced into the Japanese market as a product named the Portable Remote Methane Detector (PRMD). Some PRMD units were in research use for detecting methane emissions from garbage landfills, although the PRMD was mainly developed for remote detection of leaks from natural gas pipelines. The author expects that the PRMD could become the standard equipment for field measurements of methane emissions from land.     

遥感数字图像处理课程教学模式的构建

基于遥感数字图像处理课程的特点和教学目标,本文提出了探索模式、项目模式和近距接触模式3种教学模式。这些教学模式皆注重对科学精神、人文精神、团队意识、创新能力等意识和能力的培养。教学实践表明,这些教学模式可在传授知识和培养技能的同时,有效地提高学生的多种意识和能力。     

基于IHS的多源遥感数据融合

首先简要叙述了IHS法在遥感图像融合中的应用,然后对实验结果进行了分析,并用融合后的图像建立了土地利用类型的解译标志,以期为HIS法用于遥感图像融合提供参考。     

现代遥感技术在土地执法监察工作中的应用

描述了现代遥感技术在国土资源系统执法监察工作中的应用,对使用的工艺流程、技术路线进行了详细描述和分析。     

遥感专业《数字图像处理》课程教学探讨

《数字图像处理》是遥感科学与技术专业的一门专业必修课程。根据专业特性、课程体系和课程教学的要求,从课程教材和教学内容、方法和手段、实践教学等方面介绍了在遥感科学与技术专业开设《数字图像处理》课程的教学实践,并指出了进一步加强数字图像处理教学努力的方向。     

汶川地震重灾区泥石流沟内崩滑物空间分布的RS-GIS定量方法

汶川地震在山区引发大量崩塌、滑坡,形成大量的固体松散碎屑物质堆积在沟谷内(CLCAR,崩滑碎屑区),使得地震山区泥石流活动性增强。以岷江上游四川省汶川县银杏乡、映秀镇的15条泥石流沟的SPOT遥感影像为基础,利用GIS技术对CLCAR空间分布进行分析。建立CLCAR与流域高程、主沟侧距和沟口纵距的分布函数T(x)、M(x)和G(x),对CLCAR的空间分布特征进行描述;并计算其积分(DT、DM和DG)作为CLCAR空间分布特征的定量化参数。结果表明,函数T(x)、M(x)和G(x)能够较全面描述CLCAR的空间分布特征,DT、DM和DG能够作为CLCAR空间分布特征的定量化参数。泥石流沟谷内CLCAR的空间分布对泥石流的形成及规模具有一定的影响;在对灾区泥石流研究时有必要考虑泥石流沟内CLCAR空间分布特征。