内蒙古中西部地区震源参数和场地响应反演

采用Atkinson方法，基于遗传算法，利用呼和浩特数字地震台网7个子台记录的9次质量较高的地震事件资料，计算了内蒙古中西部地区的品质因子Q值和非弹性衰减系数c（f）。在所研究的频率范围内，前者和频率．厂有很好的线形关系：Q（f）=116．8f^1.000后者与频率．厂的变化关系不明显。在此基础上采用Moya方法反演了7个地震台的场地响应和地震的震源参数，并对它们之间的相互关系进行了讨论。结果显示在所研究的频率域内7个基岩台站的场地均不同程度的存在放大作用，其次震源参数间具有较好的线性关系。本文还详细介绍了Atkinson方法和Moya方法的原理和计算步骤。     

An automated salt‐tracing gauge for flow‐velocity measurement

This article introduces the SVG (salt‐velocity gauge), a novel automated technique for measuring flow velocity by means of salt tracing. SVG allows a high measuring rate (up to one every 2 seconds), short control section length (down to 10 cm), high accuracy (+[sol ]?1·5 cm s^?1), and unbiased calculation of the mean velocity in experimental conditions with turbulent, supercritical flow. A few cubic centimetres of saturated salt solution (NaCl) are injected into the flow at regular time intervals using a programmable solenoid valve. The tracer successively passes two conductivity probes placed a short distance downstream. The transformation of the signal between the two probes is modelled as a one‐dimensional diffusion wave equation. Model calibration gives an estimation of the mean velocity and the diffusion for each salt plume. Two implementations of the SVG technique are described. The first was an outdoors simulated rainfall experiment in Senegal (conductivity probes at 40 cm apart, 8 Hz measurement rate, salt injections at 10 second intervals). Mean velocity was estimated to range between 0·1 and 0·3 m s^?1. The second was a laboratory‐based flume experiment (conductivity probes at 10 cm apart, 32 Hz, salt injections at 2 second intervals). Another SVG with probes at 34 cm apart was used for comparison. An acoustic Doppler velocimeter (ADV) was also used to give an independent assessment of velocity. Using the 10 cm salt gauge, estimated mean velocity ranged from 0·6 to 0·9 m s^?1 with a standard deviation of 1·5 cm s^?1. Comparisons between ADV, 10 cm SVG and 34 cm SVG were consistent and demonstrated that the salt‐tracing results were unbiased and independent of distance between probes. Most peaks were modelled with r² > 90 per cent. The SVG technology offers an alternative to the dye‐tracing technique, which has been severely criticized in the literature because of the wide interval of recommended values for the correction factor α to be applied to the timings. This article demonstrates that a fixed value of α is inappropriate, since the correction factor varies with velocity, diffusion and the length of the control section. Copyright © 2005 John Wiley & Sons, Ltd.     

Probabilistic approach for active control of structures: experimental verification

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.     

An adaptive finite element model for wellbore breakout simulation

A finite element formulation is proposed and implemented for analysing the stability of excavated wells using the DiMaggio-Sandler constitutive elastoplastic model with a typical carbonate reservoir configuration. The quality of the finite element approximation is ensured by applying smooth curved elements adapted to the wellbore geometry, and h − p adaptive finite element meshes in the plastic zone. General purpose procedures are defined to transfer the elastoplastic deformation history to newly created integration points. A breakout damage criterion is proposed based on the second invariant of the deviatoric plastic deformation tensor. This damage criterion is used to apply a mesh movement algorithm to represent material collapse. The automatic successive application of the breakout damage criterion results in elliptical realistically looking geometries obtained in experiments reported in the literature.     

ROCKS & MINERALS DETERMINATION AND ANALYSIS

正20140786Deng Zhenping(Institute of Karst Geology,Chinese Academy of Geological Sciences,Guilin 541004,China);Yang Wen-qiong Application of Stripping Voltammetry with a Solid Amalgam Electrode for Determination of Copper in a Tracer and Groundwater Tracing Experiment(Rock and Mineral Analy-     

Water level observations from unmanned aerial vehicles for improving estimates of surface water–groundwater interaction

Integrated hydrological models are usually calibrated against observations of river discharge and piezometric head in groundwater aquifers. Calibration of such models against spatially distributed observations of river water level can potentially improve their reliability and predictive skill. However, traditional river gauging stations are normally spaced too far apart to capture spatial patterns in the water surface, whereas spaceborne observations have limited spatial and temporal resolution. Unmanned aerial vehicles can retrieve river water level measurements, providing (a) high spatial resolution; (b) spatially continuous profiles along or across the water body, and (c) flexible timing of sampling. A semisynthetic study was conducted to analyse the value of the new unmanned aerial vehicle‐borne datatype for improving hydrological models, in particular estimates of groundwater–surface water (GW–SW) interaction. Mølleåen River (Denmark) and its catchment were simulated using an integrated hydrological model (MIKE 11–MIKE SHE). Calibration against distributed surface water levels using the Differential Evolution Adaptive Metropolis algorithm demonstrated a significant improvement in estimating spatial patterns and time series of GW–SW interaction. After water level calibration, the sharpness of the estimates of GW–SW time series improves by ~50% and root mean square error decreases by ~75% compared with those of a model calibrated against discharge only.     

Retaining wall optimization using interior search algorithm with different bound constraint handling

Along with the applicability of optimization algorithms, there are lots of features that can affect the functioning of the optimization techniques. The main purpose of this paper is investigating the significance of boundary constraint handling (BCH) schemes on the performance of optimization algorithms. To this end, numbers of deterministic and probabilistic BCH approaches are applied to one of the most recent proposed optimization techniques, named interior search algorithm (ISA). Apart from the implementing different BCH methods, a sensitivity analysis is conducted to find an appropriate setting for the only parameter of ISA. Concrete cantilever retaining wall design as one of the most important geotechnical problems is tackled to declare proficiency of the ISA algorithm, on the one hand, and benchmark the effect of BCH schemes on the final results, on the contrary. As results demonstrate, various BCH approaches have a perceptible impact on the algorithm performance. In like manner, the essential parameter of ISA can also play a pivotal role in this algorithm's efficiency. Copyright © 2017 John Wiley & Sons, Ltd.