Evidence of reworking and resuspension of carbonates during last glacial maximum and early deglacial period along the southwest coast of India

A gravity core collected from the upper slope of southwest of Quilon at a water depth of 776 m (Lat: 8°12′263″N, Long: 76°28′281″E) was analysed for texture (carbonate free), calcium carbonate and organic carbon. Variation in silicic fraction seems to be controlled by silt, i.e., enrichment from 15 ka BP to 10 ka BP and then constant in Holocene. Below 15 ka BP, the silicic fraction gets depleted compared to the Holocene section with a minimum around 21 ka BP. Clay content remains nearly constant except in the Holocene where it shows an enrichment. Carbonate content of less than 63 micron when computed by subtracting coarse fraction content from the total carbonate suggests that the total carbonates are mainly concentrated in the finer fraction. All these carbonate phases show an inverse relationship with silicic fraction except in Holocene. Below 15 ka BP, CaCO₃ dominates in sediments comprising more than 65%, such an increase is also seen in the coarse fraction. Coarse fraction from these sections contains abundant nodular type aggregates encrusting small forams. This period is marked by a high sedimentation rate comparable to Holocene. These parameters suggest that the productivity and precipitation have increased in the Holocene due to the intensification of the southwest monsoon. During the last glacial maximum and early deglacial period the high sedimentation rate indicates redeposition of the carbonates from the existing carbonate lithofacies situated between Quilon and Cape Comorin probably due to the slope instability.     

Practical Research of IKONOS-2 Geopositioning and Its Accuracy in Tibet of China

This paper presents the studies of the refining of IKONOS-2 RPC, the transform of the datum, the mode of the control point distribution and the method of IKONOS stereo triangulation, so that IKONOS imagery can be used to collect the precise geospatial data and produce the large scale map. The transform between the IKONOS-2 image space and the national coordinate system based on the RPC have been developed, and the results of block adjustment with various control schemes in a practical project near Himalayas have been examined and analysed. The encouraging results of high positioning accuracy have been obtained.     

纹理映射失真处理中的LOD技术

纹理映射是计算机图形学中广泛应用的一项重要技术,纹理图像可以描述景物表面各点处的反射属性,模拟景物表面丰富的纹理细节,减少建模的工作量,提高计算机生成图形的真实性.但是由于纹理都为栅格图像,放大和缩小会产生一定程度的失真,所以要对纹理进行细节分层处理.文中主要介绍纹理的重采样和建立金字塔技术,提出减少纹理映射失真的方法.     

基于PGNAA技术在线分析系统的应用

近年来,随着核探测与分析技术的日趋成熟,使复杂γ谱的获取、解析达到了在线测量的要求,从而使在线PGNAA(中子活化瞬发γ射线分析)技术获得了飞速的发展。它可对一些工业生产过程中的全物料进行在线测量,其分析精度、可靠性等皆能满足在线元素含量分析的需要,因而显示出巨大的发展潜力和广阔的市场前景。这里介绍了基于PGNAA技术的在线分析系统的基本原理、组成和发展,并概述了它在水泥、煤炭等行业的应用情况。     

东准噶尔纸房地区晚石炭世巴塔玛依内山组陆相火山-沉积体系特征

东准噶尔巴塔玛依内山组是典型陆相火山．沉积体系(盆地)，主体由基性及中酸性火山熔岩组成，火山碎屑岩及火山碎屑沉积岩较少，通过对纸房地区晚石炭世巴塔玛依内山组陆相火山岩的岩石化学、地球化学特征进行系统研究，认为它属于造山期后固结初期，新陆壳裂谷向高原火山岩演化的同岩浆源、同沉积盆地、同火山作用的钙碱系列双峰式火山岩．     

激光剥蚀等离子体质谱分析中激光剥蚀参数对信号响应的影响

探讨了激光剥蚀等离子体质谱固体微区分析中激光剥蚀参数对元素分析信号灵敏度及稳定性的影响。这些参数包括激光功率、脉冲频率、剥蚀孔经、散焦距离、剥蚀方式等。讨论了优化的激光剥蚀等离子体质谱信号采集及数据处理方式。在全质量范围内选用具有代表性的元素作为研究对象,建立了激光剥蚀的一般性特征规律和266nm紫外激光系统的最佳操作条件。在选定的激光剥蚀参数下,大多数被测元素的检出限为22.8~457ng/g,能够满足固体微区分析的要求。     

滑坡及危岩(崩塌)防治工程措施选择与工程设置

滑坡和危岩（崩塌）治理工程措施较多，措施组合可变性大，每种工程措施都有其相应的应用条件，不宜性、适宜性和最佳配置组合。治理工程措施选择应充分考虑治理工程功能性的具体要求、在不同工况条件下的安全性及耐久性、工期要求和投资的经济性以及后期维护的要求、工程岩土体性质及其蓄水后的变化、场地条件、施工技术条件、地方材料资源等具体制约因素以及环境保护的要求。在三峡水库区二期地质灾害防治工程国家级验收总结的基础上，对滑坡与危岩（崩塌）常用防治工程措施（排水、削方减载、回填压脚、抗滑桩、重力式抗滑挡墙、预应力锚索、格构锚固、拦石墙等）的工程适用条件、工程设置及不宜性进行了详细的分析，并提出工程设置应考虑及注意的问题。     

绿片岩三轴流变力学特性的研究(II):模型分析

首先,基于在岩石全自动流变伺服仪上得到的绿片岩三轴流变试验曲线,采用五元件线性粘弹性模型对表现为粘弹性流变特性的曲线进行了辨识,获得了绿片岩的粘弹性流变参数;然后,提出了一个新的非线性粘性元件,并将其与塑性体并联起来,得到一个新的非线性粘塑性体(NVPB),该体能充分反映岩石的加速流变特性:同时,将NVPB模型与五元件粘弹性模型串联起来,建立了一个新的岩石七元件非线性粘弹塑性流变模型。采用绿片岩加速流变全过程曲线,对提出的岩石七元件非线性粘弹塑性流变模型进行了辨识,得到了岩石七元件非线性粘弹塑性流变模型的材料参数。流变模型与试验结果的比较,显示了所建模型的正确性与合理性。     

Geometry and accuracy of reflecting points in bistatic satellite altimetry

The analysis of the time and space distribution of specular (reflecting) points in bistatic altimetry between GPS and CHAMP satellites or SAC-C (taken as examples) is extended from Wagner and Klokočník (2003 J. Geod 77: 128–138). We demonstrate a significantly higher number and density of reflecting points in bistatic altimetry in comparison with traditional monostatic altimetry. After an outline of our older accuracy assessment for the vertical position of the reflecting point, we add a new independent derivation and compare both approaches. We account for orbit errors of both the transmitters (GPS) and receiver (CHAMP) satellites, and the measurement (delay) error. We found that the accuracy of the vertical position of the reflecting point decreases only slowly with increasing off-nadir angle and that the orbit errors must be accounted for if decimeter and better accuracy is required. In this paper, we do not study errors such as state of the ocean, technical parameters of the receiving system, and atmospheric corrections.     

Single frequency processing of Ørsted GPS radio occultation measurements

The Global Positioning System (GPS) radio occultation measurements obtained using the TurboRogue GPS receiver on the Danish satellite Ørsted have been processed using the single frequency method. Atmospheric profiles of refractivity and temperature are derived and validated against numerical weather prediction data from the European Centre for Medium-Range Weather Forecast (ECMWF). Results from the Ørsted GPS measurement campaign in February 2000 indicate that the single frequency method can provide retrievals with accuracy comparable to that of using two frequencies. From comparisons between measured dry temperature profiles and corresponding dry temperature profiles derived from ECMWF analysis fields, we find a mean difference of less than 0.5 K and a standard deviation of 2–4 K between 500 and 30 hPa in height. Above 30 hPa the impact of the ionosphere becomes more dominant and more difficult to eliminate using the single frequency method, and the results show degraded accuracy when compared to previous analysis results of occultation data from other missions using the dual frequency method. At latitudes less than 40° (denoted low latitudes), the standard deviation is generally smaller than at latitudes higher than 40° (denoted high latitudes). A small temperature bias is observed centered at 200 hPa for low latitudes and at 300 hPa for high latitudes. This indicates that the ECMWF analyses do not adequately resolve the tropopause temperature minimum. In the lowest part of the troposphere an observed warm bias is thought to be due to erroneous tracking of the GPS signal in cases of atmospheric multipath propagation.