Microstructural evolution of the Seridó Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

The polyphase evolution of the Seridó Belt (NE-Brazil) includes D₁ crust formation at 2.3–2.1 Ga, D₂ thrust tectonics at 1.9 Ga and crustal reworking by D₃ strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D₂ and D₃ events were used to constrain the tectono-thermal evolution of the belt. D₂ shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D₃, enhancement of ductility by dissipation of heat that came from syn-D₃ granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D₃ shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.     

程海断裂带断层泥中石英碎砾表面SEM特征及断层活动状态的分析

根据断层泥中石英碎砾表面SEM特征的鉴定研究，可将程海断裂中、北段断层泥中石英碎砾表面SEM形貌特征分为6类，这表明该段断裂经历了长期多期次活动，强烈活动时间在中晚更新世；5件样品中均未见破裂类(Io)的石英颗粒，表明程海断裂全新世以来强烈活动的频度相对较低。石英碎砾表面机械作用特征的分类统计研究显示：程海断裂中、北段晚更新世以来，断层所经历的活动方式以粘滑活动为主。     

Triaxial stress state deep in orogenic belts: an example from Turkey

A rare metachert pebble containing amphibole grains with microboudin structures in a wide range of orientations provides an opportunity to perform stress analysis in two orthogonal orientations on the foliation surface. The sample was analysed by the microboudin method to infer the triaxial stress state during microboudinage. Stress parameters proportional to the far-field differential stress were determined for sodic amphibole grains in the two orientations. The ratio of the stresses in the two orthogonal orientations (σ₁−σ₂)/(σ₁−σ₃) was calculated to be 0.64, indicating that σ₂ lies closer to the midpoint between σ₁ and σ₃ than to σ₃.     

The influence of stress history on the grain size and microstructure of experimentally deformed quartzite

Deformation of middle crustal shear zones likely varies with time as a result of the stress build-up and release associated with earthquakes and post-seismic deformation, but the processes involved and their microstructural signature in the rock record are poorly understood. We conducted a series of experiments on quartzite at 900 °C to characterize microstructures associated with changes in stress and strain rate, and to investigate the feasibility of carrying out grain size piezometry in natural rocks that experienced analogous changes. Differential stress (referred to simply as “stress”) was varied in two-stage experiments by changing strain rate and by stopping the motor and allowing stress to relax. The two-stage samples preserve a microstructural record that can be interpreted quantitatively in terms of stress history. The microstructure associated with a stress increase is a bimodal distribution of recrystallized grain sizes. The smaller grains associated with the second deformation stage accurately record the stress of the second stage, and the surviving coarse grains remain similar in size to those formed during the earlier stage. The transient microstructure associated with stress decrease is a “partial foam” texture containing a larger concentration of stable 120° triple junctions than occur in samples deformed at a relatively constant strain rate. Our results indicate that microstructures preserved in rocks that experienced relatively simple, two-stage deformation histories can be used to quantitatively assess stress histories.Grain growth rates during deformation are similar to rates observed in previous isostatic growth experiments, supporting theoretical approaches to recrystallized grain size, such as the wattmeter theory (Austin and Evans, 2007), that incorporate static growth rates. From an analysis of the experimental data for quartz recrystallized grain size, we find: 1) Recrystallized grain size quickly reaches a value consistent with ambient deformation conditions. We argue that this explains a good match between average grain sizes predicted by the wattmeter after complete recrystallization and the recrystallized grain sizes of the experiments. 2) The present formulation of the wattmeter overestimates the rates at which porphyroclasts recrystallize by as much as an order of magnitude, and 3) owing to problems with extrapolation of grain growth data for quartz, the wattmeter is not presently applicable to natural samples deformed at low temperatures. We present a simplified flow law for quartz, and suggest that the change in slope of the quartz piezometer at high stress (regime 1) is related to a switch to a linear viscous rheology.     

Short-lived polyphase deformation during crustal thickening and exhumation of a collisional orogen (Ribeira Belt,Brazil)

The Ribeira Belt (Brazil) is a Neoproterozoic collisional-related feature that was located in a south-central position in West Gondwana. We present quantitative data on finite strain, flow vorticity and deformation temperatures for the Curitiba Terrane, a major segment of the southern Ribeira Belt. Six deformation phases (D₁-D₆) related with crustal thickening and exhumation were recognized. D₁ and D₂-related microstructures are preserved exclusively within porphyroblasts, in part grown during stages of high-pressure (∼9–12 kbar) isobaric heating after crustal thickening. D₃ phase was active from peak metamorphism attained in contrasting crustal levels (810–400 °C), to the early stage of exhumation (500–400 °C), as indicated by petrological, microstructural and quartz c-axis fabric evidence. Kinematic vorticity results indicate that the SL₃ mylonitic fabric resulted from a simple shear-dominated deformation related with westward thrusting. North-verging overturned D₄ folds with E-W-trending subhorizontal axes derived from a pure shear-dominated deformation. Regional D₅ open folds with subvertical axes and NNE-SSW-trending traces were produced by indentation tectonics. D₆ phase comprises retrograde orogen-parallel transcurrent shear zones related with scape tectonics. Geochronological data indicate that D₃-D₆ phases occurred between 584 and 580 Ma, suggesting a fast exhumation rate of ∼8 mm/year for the deepest rocks from the southern Ribeira Belt.     

延边开山屯花岗闪长岩-石英闪长岩体年代学、地球化学特征及对古太平洋板块俯冲作用时限的制约

近年来古太平洋构造域的构造演化备受学者关注。本文报道的延边开山屯地区花岗闪长岩-石英闪长岩体LAICP-MS U-Pb年龄表明其形成时间为早侏罗世早期(198±1Ma),所采样品可根据Zr/Hf值分为高Zr/Hf值组花岗闪长岩和低Zr/Hf值组石英闪长岩。高Zr/Hf值组花岗闪长岩起源深度浅,富集Rb、Th、U、K等大离子亲石元素(LILEs),贫Nb、Ta、Ti等高场强元素(HFSEs),具壳源岩浆的特点。低Zr/Hf值组为壳源岩浆与来自深部的亏损地幔岩浆混合而成,岩石亏损Nb、Ta、Zr、Hf、Ti等高场强元素,具有典型的弧型岩浆地球化学特征。岩体中存在细粒闪长质包体,镜下可见针柱状磷灰石。开山屯岩体属钙碱性系列岩石,结合前人资料,认为其与该地区同时代火成岩组成北-东向分布的早侏罗世活动大陆边缘型火成岩带,而位于该带西侧的小兴安岭-张广才岭地区存在同时代弧后拉张带,两者构成典型的大陆弧与弧后拉张带模型,共同揭示了早侏罗世早期古太平洋板块对东北地区的俯冲作用。     

Advances and Issues in Luminescence Dating of Loess Deposits in Arid Central Asia

High-resolution loess deposits are widely distributed in Arid Central Asia (ACA) and provide important records associated with dust transportation, paleoenvironmental and paleoclimatic evolution. The chronology is the foundation of the research into loess deposits as an environmental archive. In recent decades, the gradually developed optical dating method has been increasingly matured and become an important approach to establishing the loess-paleosol sequences. Here, we summarized and discussed previous work on loess chronology mainly based on optical dating approach in ACA. The following understandings have been listed: ① In comparison with optical dating method, the suitable material for ¹⁴C dating is uncommon in ACA. However, the dating range of luminescence dating is more extensive, and the dating materials are accessible. Thus, the optical dating is widely applicable in the establishment of loess framework in this area. ② Until now, the quartz Single Aliquot Regeneration (SAR) method can be applied to the establishment of loess-paleosol sequence since last glacial period. But several issues remain unaddressed. For example, the Optically Stimulated Luminescence (OSL) signal sensitivity of quartz grains are low in some areas. Furthermore, the results of OSL dating of different grain sizes within a single sample are inconsistent in some areas. The solution of these problems still requires more methodological research. ③ The post-IR IRSL (pIRIR) and multiple elevated temperature stimulation (MET-pIRIR) protoCols of feldspar have basically overcome the anomalous fading issue in the traditional IRSL dating process. In ACA, the framework since MIS 7 can be established with K-feldspar luminescence dating method. Compared with quartz luminescence characteristics, the K-feldspar luminescence signals are more sensitive and exhibit a high saturation level. In specific applications, it is necessary to establish the age frame according to the luminescence sensitivity, the age of samples or other factors.     

赣南合龙钨矿矿床地质、成岩成矿时代与成矿模式

合龙钨矿床位于南岭东西向构造岩浆带与北-北东向于山构造带交汇部位,是南岭东段于都-赣县矿集区的重要组成.合龙钨矿床是赣南地区近年在石英脉型钨矿勘查取得最重要突破的矿区,新发现钨多金属矿体达48条,新探明黑钨矿资源量3.5万余吨,WO3平均品位2.189％,深部具有大型以上资源潜力.合龙钨矿床以外带石英大脉型矿体与岩体内...     

Supply and Demand Levels for Livestock and Poultry Products in the Chinese Mainland and the Potential Demand for Feed Grains

The widening gap between the supply and demand levels for livestock and poultry products in the Chinese mainland poses a significant challenge to the secure supply of feed grains. Therefore, the accurate prediction of the demand potential for feed grains represents a key scientific issue for ensuring food security in the Chinese mainland. This study is based on an analysis of several factors, such as the Chinese mainland’s output, trade volume, apparent consumption of livestock and poultry products, and two different scenarios for predicting the future demand for feed grains are assessed. The results indicate that output and consumption of livestock and poultry products, as well as the country’s trade deficit and the pressure of the supply and demand balance with respect to these products, have been increasing in recent years. The analysis predicts that the demand for feed grains in the Chinese mainland will reach 425.5 or 389.6 million tons in 2030 based on the two scenarios. This finding indicates that with the increasing demand for livestock and poultry products in the Chinese mainland, the demand for feed grains will continue to increase, and the shortfall in feed grains and raw materials will expand further, especially dependence on external sources of protein-rich feed grains will remain high.